Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 36 | 58 | 61 |
| 1440p QHD | 45 | 66 | 99 | 112 |
| 1080p Full HD | 68 | 96 | 145 | 161 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i7-14700F and NVIDIA GeForce RTX 5060 combination delivers measured frame rates in Archeage that are highly dependent on resolution and preset. At 1920x1080, every preset exceeds the 60 FPS playable threshold, while 2560x1440 requires High or lower settings, and 3840x2160 only reaches playable performance on Low. This analysis uses the measured FPS data, combo ranking, and component benchmarks to explain exactly where this system lands and what you can expect.
Measured FPS Breakdown
The measured average frame rates for this combo cover four presets at three resolutions. At 1920x1080, the system delivers 160.7 FPS on Low, 144.7 FPS on Medium, 95.8 FPS on High, and 67.5 FPS on Ultra. All four presets clear the 60 FPS threshold, with Ultra remaining comfortable above the playable mark. The gap between Low and Ultra is large — 160.7 down to 67.5 — but even the worst case at 1080p is playable.
Moving to 2560x1440, the averages drop to 111.7 FPS on Low, 99.1 FPS on Medium, 65.6 FPS on High, and 44.6 FPS on Ultra. Here, High still clears 60 FPS by a small margin, Medium and Low are well above, but Ultra falls below the playable threshold. The 1440p results show that the GPU becomes more stressed at higher settings, but the system remains capable of smooth gameplay on High and lower.
At 3840x2160, the picture changes more dramatically. Low settings produce 61.3 FPS, just above the playable line. Medium drops to 57.8 FPS, which is below 60. High yields 36.2 FPS, and Ultra drops to 27.9 FPS. Only the Low preset at 4K is playable, and even then it barely clears the threshold. The data does not include minimum or maximum frame times, so we cannot assess frame pacing or stutter from this dataset, but the average frame rates are clear.
Overall, the system is best suited to 1080p where it can handle even Ultra, and 1440p where it can handle High or lower. At 4K, only the lowest settings are viable.
How This Combo Ranks
Among the 3708 tested combinations in the Archeage benchmark database, the Intel Core i7-14700F + RTX 5060 ranks 1695th. This places it in the top half of all tested systems — specifically, it performs better than 2013 other combos (3708 minus 1695). The rank indicates that this setup is a solid mid-range performer for this MMORPG, though not among the top-tier configurations.
The CPU itself sits at the 91st percentile of all CPUs tested, while the GPU sits at the 72nd percentile of all GPUs. That discrepancy is telling: the processor is far stronger relative to its peers than the graphics card is. The CPU’s average benchmark score is 53620, and it has a strong multi-core score of 35122 in Cinebench R23 and a single-core score of 4958. The GPU, meanwhile, has an average benchmark score of 26331 and a PassMark G3D score of 20891. In Archeage, which is an MMORPG, the CPU is likely to have a meaningful impact on frame rates, especially at lower resolutions where the GPU is not the bottleneck.
CPU and GPU Roles
The measured FPS data shows a clear scaling pattern with resolution and preset. At Low settings, the average frame rate drops from 160.7 FPS at 1080p to 111.7 FPS at 1440p and 61.3 FPS at 4K. That is a decline of roughly 30% going from 1080p to 1440p, and a further 45% from 1440p to 4K. This consistent scaling with pixel count suggests the GPU is the primary limiting factor at higher resolutions.
At Ultra settings, the same pattern is even more pronounced: 67.5 FPS at 1080p, 44.6 FPS at 1440p, and 27.9 FPS at 4K. The Ultra preset is computationally heavy, and the frame rate drops by about a third from 1080p to 1440p, then by another third from 1440p to 4K. The data indicates that the GPU becomes the bottleneck as soon as the resolution and quality settings increase.
The CPU’s role is visible at the low end. At 1080p Low, the system reaches 160.7 FPS, which is a very high frame rate that only a capable processor can feed. The i7-14700F’s single-core performance — a Cinebench R23 score of 4958 — is well above average, and that helps maintain high frame rates when the GPU is not fully occupied. At 1440p Low, the frame rate still sits at 111.7 FPS, again showing that the CPU can keep up with the GPU. Only when the GPU becomes saturated at higher resolutions and presets does the frame rate fall below the playable threshold.
Similar Performance Alternatives
The nearest rivals to the i7-14700F in the benchmark database are the Intel Xeon 6505P (average score 53701, delta -0.2%), the Intel Xeon Phi 7290 (53469, delta +0.3%), the AMD Ryzen 9 7900X (53288, delta +0.6%), and the AMD EPYC 7313P (53206, delta +0.8%). These CPUs have average benchmark scores within 1% of the i7-14700F’s 53620 average score. Swapping the i7-14700F for any of these would produce essentially identical frame rates in Archeage, because their overall performance is so close.
On the GPU side, the RTX 5060’s nearest rivals are the AMD Radeon 860M (average score 26401, delta -0.3%), the NVIDIA GeForce MX550 (26421, delta -0.3%), the AMD Radeon RX 5700 XT 50th Anniversary (26553, delta -0.8%), and the AMD Radeon RX 6750 XT (26011, delta +1.2%). These GPUs have average scores within 1.5% of the RTX 5060’s 26331 average. In practice, they would deliver very similar frame rates in Archeage, though the RX 6750 XT is slightly faster on average and the others are slightly slower.
FAQ
Q: Can the i7-14700F + RTX 5060 run Archeage at 1080p with Ultra settings?
A: Yes. The measured average FPS at 1080p Ultra is 67.5 FPS, which exceeds the 60 FPS playable threshold.
Q: What is the best resolution for this system in Archeage?
A: At 1080p, all presets are playable. At 1440p, High, Medium, and Low are playable, but Ultra is not (44.6 FPS). At 4K, only Low is playable, at 61.3 FPS.
Q: How does the CPU compare to its closest rivals?
A: The i7-14700F has an average score of 53683. Its nearest rival, the Intel Xeon 6505P, scores 53701 (0.2% lower). The AMD Ryzen 9 7900X scores 53288 (0.6% higher). These differences are negligible for gaming.
Q: Is the GPU or CPU the bottleneck in Archeage?
A: The data shows the GPU becomes the primary limiting factor at higher resolutions and presets. At 1080p Low, the system reaches 160.7 FPS, indicating the CPU can handle high frame rates. At 4K Ultra, the frame rate drops to 27.9 FPS, showing the GPU is the bottleneck.
Q: What is the system’s overall rank among tested combos?
A: It ranks 1695th out of 3708 tested combinations, placing it in the top half of all tested systems for Archeage.
The Verdict
The Intel Core i7-14700F with NVIDIA GeForce RTX 5060 can run Archeage at playable frame rates in most scenarios. At 1920x1080, every preset — Low, Medium, High, and Ultra — averages above 60 FPS, with Ultra delivering 67.5 FPS. At 2560x1440, High, Medium, and Low are playable, with High at 65.6 FPS, but Ultra falls to 44.6 FPS. At 3840x2160, only Low reaches the playable threshold at 61.3 FPS; Medium is 57.8 FPS and High and Ultra are well below.
The system is best suited for 1080p gaming, where it can max out all settings. At 1440p, it is a capable high-refresh experience on High and lower, and at 4K, it requires the lowest settings to stay above 60 FPS. If you target 1440p or 4K, you will need to adjust quality settings, but the combination of the i7-14700F and RTX 5060 is a solid, playable option for this MMORPG.