Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 63 | 92 | 104 |
| 1440p QHD | 75 | 110 | 161 | 181 |
| 1080p Full HD | 111 | 163 | 240 | 269 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4080 delivers a commanding performance profile in Archeage, a 2014 MMORPG that clearly favors high refresh rates. Benchmark data shows this combination is not merely playable but often exceeds the 60 FPS threshold by a wide margin, even at demanding 4K resolutions. The measured FPS figures reveal a system that scales predictably with resolution and settings, though the data also exposes a significant performance cliff at the Ultra preset in 4K that warrants careful consideration.
Measured FPS Breakdown
At 3840x2160, the data shows a wide variance across the four tested presets. The Low preset produces an average of 104 FPS, which is exceptionally high for 4K and indicates that the CPU-GPU combination is nowhere near its limits when visual effects are minimized. Moving to Medium, the average drops to 92 FPS with a minimum of 79 FPS and a maximum of 106 FPS, showcasing a stable frame delivery that stays well above the 60 FPS playability threshold. The High preset yields 63 FPS on average, which just clears the playable mark but leaves little headroom for demanding scenes or large-scale PvP battles. The Ultra preset, however, reveals a sharp drop to 43 FPS average, falling below the 60 FPS threshold and indicating that this setting is not viable at 4K with this hardware.
Stepping down to 2560x1440 reveals a much healthier performance envelope. The Low preset achieves 181 FPS on average, while Medium reaches 161 FPS with a minimum of 137 FPS and a maximum of 186 FPS. These numbers suggest that the RTX 4080 has substantial headroom at this resolution, with the frame rate being more than sufficient for smooth gameplay on high-refresh-rate monitors. The High preset delivers 110 FPS average, and even the Ultra preset manages 75 FPS, comfortably clearing the 60 FPS threshold. The scaling from 4K to 1440p is particularly notable: the High preset improves by 47 FPS (from 63 to 110), and the Ultra preset improves by 32 FPS (from 43 to 75), demonstrating that resolution is a primary bottleneck for this game.
At 1920x1080, the system operates in a performance stratosphere. The Low preset hits an extraordinary 269 FPS average, while Medium achieves 240 FPS with a minimum of 204 FPS and a maximum of 276 FPS. High reaches 163 FPS, and even Ultra maintains a robust 111 FPS. These figures indicate that at 1080p, the frame rate is likely constrained by CPU performance rather than the GPU, as the differences between presets become less pronounced relative to the resolution scaling observed at higher settings. The 1080p Medium preset’s minimum of 204 FPS is higher than the 4K Ultra preset’s average, illustrating the massive performance gap between these extreme resolution points.
How This Combo Ranks
Within the benchmark database, this CPU-GPU combination holds the 203rd position out of 3,708 tested combos for Archeage, placing it in the top 5.5% of all configurations. This ranking is notable given the game’s age and its relatively low graphical demands compared to modern titles. The percentile data for the individual components reinforces this positioning: the Core i7-13700K sits at the 89th percentile against all CPUs, while the RTX 4080 occupies the 86th percentile against all GPUs. The combination of two high-percentile components produces a synergistic effect in Archeage, where the rank of 203 out of 3,708 suggests that even some combos with more powerful individual parts do not necessarily outperform this pairing.
The rank also implies that the system is not limited by a single weak link. In many games, an imbalanced CPU-GPU pairing can drag down overall performance, but the data for this combo shows consistent high FPS across all resolutions except 4K Ultra. The fact that the combo rank is 203 rather than higher indicates that there are 202 other tested configurations that deliver even better performance in Archeage, likely featuring newer or more expensive hardware. However, for a system built around a 13th-gen Intel processor and a 40-series NVIDIA GPU, this ranking reflects strong, well-rounded performance that should handle not only Archeage but also many other titles with ease.
CPU and GPU Roles
The benchmark data reveals an interesting interplay between the CPU and GPU in Archeage, with the workload distribution shifting significantly across resolutions. At 1920x1080, the frame rates are so high (269 FPS on Low, 240 FPS on Medium) that the CPU’s role becomes more prominent. The Core i7-13700K, with its 16 cores and 24 threads, provides a strong foundation, but the massive frame counts suggest that the GPU is not fully saturated. The difference between Low and Ultra at 1080p is 158 FPS (269 to 111), which indicates that the GPU is still doing meaningful work as settings increase, but the CPU is likely the limiting factor at the highest frame rates.
As resolution increases to 2560x1440, the balance shifts. The GPU begins to take on more responsibility, as evidenced by the larger FPS drops when moving from Medium to High (51 FPS drop) and from High to Ultra (35 FPS drop). The CPU’s workload remains relatively constant, but the GPU’s pixel-processing demands grow. At 3840x2160, the GPU becomes the clear bottleneck. The Ultra preset’s drop to 43 FPS is a direct result of the RTX 4080 being overwhelmed by 4K rendering at maximum settings. The CPU’s influence is minimal at this point; even the most powerful processor cannot compensate for the GPU’s inability to maintain frame rates.
The scaling data confirms this interpretation. The FPS ratio between 1080p and 4K at Low settings is roughly 2.6x (269 vs. 104), which is close to the pixel-count difference of 4x but not equal, suggesting some CPU overhead still exists. At Ultra settings, the ratio jumps to approximately 2.6x as well (111 vs. 43), but the absolute numbers are so low at 4K that the GPU’s limitation is undeniable. The practical takeaway is that Archeage is a GPU-bound game at higher resolutions and presets, while the CPU matters most for achieving extreme frame rates at 1080p.
Similar Performance Alternatives
For the Intel Core i7-13700K, the nearest rivals in benchmark scores are all AMD or Intel server/workstation parts. The AMD Ryzen 9 5900 has an average score of 46,971, which is 0.2% lower than the i7-13700K’s 46,881. This negligible difference means that in Archeage, a system with a Ryzen 9 5900 would likely produce nearly identical FPS numbers. The AMD Ryzen AI 9 HX PRO 375 scores 47,022 (0.3% lower), while the AMD Ryzen 9 7845HX scores 46,654 (0.5% higher). The Intel Xeon w3-2535 is also within 0.5% of the i7-13700K. For gaming purposes, any of these CPUs would deliver similar frame rates in Archeage, as the game’s performance is more dependent on the GPU at higher settings.
On the GPU side, the RTX 4080’s nearest rival is the RTX 4080 SUPER, which scores 54,209 versus the RTX 4080’s 54,247, a 0.1% difference that is essentially negligible. The AMD Radeon Pro W5700X scores 54,828 (1.1% higher), while the AMD Radeon RX 6750 GRE 12 GB scores 55,698 (2.6% higher) and the AMD Radeon 8060S scores 55,757 (2.7% higher). These deltas are small enough that in real-world Archeage testing, the FPS differences would be within a few frames. A user with an RTX 4080 SUPER would see nearly identical performance, while the AMD alternatives might offer a marginal edge in certain scenarios, though the data does not specify how these scores translate to Archeage-specific performance.
FAQ
Q: Can this system run Archeage at 4K with playable frame rates?
A: Yes, at 4K the system achieves playable frame rates on the Low (104 FPS), Medium (92 FPS), and High (63 FPS) presets. The Ultra preset, however, drops to 43 FPS, which is below the 60 FPS playability threshold.
Q: What is the best settings preset for 1440p gameplay?
A: At 2560x1440, the Ultra preset delivers 75 FPS on average, making it the best playable option. All four presets (Low, Medium, High, Ultra) exceed the 60 FPS threshold at this resolution.
Q: How does the system perform at 1080p?
A: The system excels at 1920x1080, with the Ultra preset achieving 111 FPS and the Low preset reaching 269 FPS. The Medium preset has a minimum of 204 FPS, ensuring smooth gameplay even during intense moments.
Q: Is the RTX 4080 a bottleneck at any resolution?
A: The data suggests the GPU becomes a bottleneck at 4K Ultra, where the average FPS falls to 43. At lower resolutions, the GPU is sufficient to maintain high frame rates, with the CPU potentially limiting performance at 1080p.
Q: How does this combo rank compared to other tested systems?
A: This combo ranks 203rd out of 3,708 tested configurations for Archeage, placing it in the top 5.5% of all systems tested.
Q: What is the minimum FPS recorded for this system?
A: The lowest recorded minimum FPS is 79 at 4K Medium, while the highest minimum is 204 at 1080p Medium. Other presets do not have recorded minimum FPS values in the data.
The Verdict
This PC can absolutely run Archeage, and it does so with authority across most resolution and settings combinations. The verdict by resolution is clear: at 1920x1080, all four presets (Low, Medium, High, Ultra) are playable, with the Ultra preset achieving 111 FPS on average. At 2560x1440, the system again clears 60 FPS on all presets, with Ultra delivering 75 FPS. At 3840x2160, the system is playable on Low (104 FPS), Medium (92 FPS), and High (63 FPS), but the Ultra preset falls short at 43 FPS. For gamers targeting 4K, the High preset is the recommended maximum, as it stays just above the 60 FPS threshold. For those with high-refresh-rate 1440p monitors, the Ultra preset is the best choice, providing a comfortable 75 FPS. The data indicates that this hardware combination is well-suited for Archeage, offering a wide range of configurable options that cater to different display capabilities and performance preferences.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains at least 60 FPS is High, which produces an average of 63 FPS. This setting offers a good balance between visual fidelity and performance, though users seeking higher frame rates can drop to Medium for 92 FPS or Low for 104 FPS.
At 2560x1440, the Ultra preset is the best choice, delivering 75 FPS on average. This allows gamers to experience the full visual quality of the game while still maintaining smooth, responsive gameplay. The High preset at 110 FPS is available for those who prefer higher refresh rates.
At 1920x1080, the Ultra preset achieves 111 FPS, making it the recommended setting for maximum visual quality without sacrificing performance. For esports-style competitive play, the Low preset at 269 FPS or Medium at 240 FPS provides extremely high frame rates that can take full advantage of 240Hz or higher refresh rate monitors.