Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
214 FPS
Ultra 1080p Measured
85 FPS

1440p (2K / QHD)

Low 1440p Measured
144 FPS
Ultra 1440p Measured
57 FPS

4K (Ultra HD)

Low 4K Measured
83 FPS
Ultra 4K Measured
33 FPS
7.7ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 46,881
Graphics Card
Required 28,463
Your GPU 37,648

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 49 72 83
1440p QHD 57 89 127 144
1080p Full HD 85 130 186 214

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 130
1920x1080 Low 214
1920x1080 Medium 186
1920x1080 Ultra 85
2560x1440 High 89
2560x1440 Low 144
2560x1440 Medium 127
2560x1440 Ultra 57
3840x2160 High 49
3840x2160 Low 83
3840x2160 Medium 72
3840x2160 Ultra 33

Performance Analysis: Archeage on Your System

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4070 is a high-performing combination for Archeage, but its ability to deliver a smooth experience depends heavily on resolution and graphics preset. Benchmark data indicates that this system clears the 60 FPS threshold at 1080p and 1440p on most settings, while 4K gaming requires a compromise on visual fidelity. The system ranks 814th out of 3708 tested combinations, placing it in the top quarter of all hardware pairings for this title.

Similar Performance Alternatives

For the CPU, the Intel Core i7-13700K posts an average benchmark score of 46881, placing it in the 89th percentile of all processors. The closest rival is the AMD Ryzen 9 5900, which scores 46971, a negligible 0.2% difference. This means users with the Ryzen 9 5900 would see nearly identical CPU-bound performance in Archeage. The AMD Ryzen AI 9 HX PRO 375 trails by 0.3% with a score of 47022, while the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 both sit 0.5% ahead of the i7-13700K with scores of 46654 and 46653 respectively. These deltas are all within a fraction of a percent, so any of these processors would deliver effectively interchangeable frame rates in CPU-limited scenarios.

On the GPU side, the RTX 4070 achieves an average benchmark score of 37648, ranking in the 81st percentile of all graphics cards. Its nearest rival is the NVIDIA Tesla P4, which scores 37628, a mere 0.1% difference. The AMD Radeon RX Vega 56 is 0.4% ahead at 37507, while the NVIDIA GeForce RTX 4080 Mobile leads by 1.3% with a score of 38135. The AMD Radeon PRO W6400 trails by 1.3% at 37157. These margins are small enough that in actual gameplay, the choice between these GPUs would not produce a perceptible difference in Archeage’s frame rates, assuming the rest of the system remains constant.

CPU and GPU Roles

The data reveals a clear pattern: Archeage becomes increasingly GPU-bound as resolution rises, while the CPU’s influence is more pronounced at lower resolutions. At 1920x1080, the RTX 4070 has ample headroom, and the i7-13700K’s strong single-thread performance (a 3dmark single-thread score of 1136 and a passmark single-thread score of 4333) helps push frame rates to 214.1 FPS on Low settings. The gap between Low and Ultra at 1080p is 129.1 FPS, which is a massive swing driven by GPU load. At 2560x1440, the same preset swing produces a difference of 86.6 FPS (from 143.5 on Low to 56.9 on Ultra), indicating the GPU is starting to become a bottleneck at higher settings. At 3840x2160, the GPU is the dominant constraint: the spread between Low and Ultra narrows to 49.6 FPS (82.7 vs 33.1), and even High settings drop to 49.1 FPS. This scaling demonstrates that the RTX 4070’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K Ultra preset demands more than the card can deliver.

The i7-13700K’s 16 cores and 24 threads provide substantial multi-threaded capability, as evidenced by its cinebench r23 multicore score of 30745. However, Archeage, being an MMORPG from 2014, does not appear to scale heavily beyond a few cores. The benchmark results show that the frame rate differences between resolutions at the same preset are relatively modest, suggesting that the CPU is not the limiting factor in most scenarios. At 1080p Low, the system hits 214.1 FPS, which is likely near the engine’s practical ceiling for this hardware, rather than a true reflection of CPU or GPU exhaustion.

Measured FPS Breakdown

At 1920x1080, the system exceeds 60 FPS on every preset. Low settings produce an average of 214.1 FPS, Medium reaches 186.3 FPS, High delivers 130 FPS, and Ultra maintains 85 FPS. The step from High to Ultra costs 45 FPS, which is a substantial drop but still leaves the experience well above the playable threshold. No minimum or maximum frame rates were recorded, so the analysis relies solely on averages.

At 2560x1440, the performance remains strong but shows more variance. Low settings yield 143.5 FPS, Medium runs at 126.9 FPS, and High holds at 88.5 FPS. Ultra drops to 56.9 FPS, which falls just short of the 60 FPS target. This is the first preset where the system fails to maintain a smooth experience, and it indicates that 1440p Ultra is beyond the RTX 4070’s capabilities in this title.

At 3840x2160, the GPU is clearly strained. Low settings manage 82.7 FPS, which is playable, and Medium delivers 72.3 FPS, also above the threshold. High drops to 49.1 FPS, and Ultra falls to 33.1 FPS. The gap between Medium and High is 23.2 FPS, suggesting a significant increase in rendering complexity at those higher settings. The 4K results show that only Low and Medium presets are viable for a 60 FPS experience.

The Verdict

This PC can run Archeage, but the experience varies by resolution and preset. At 1920x1080, every preset clears 60 FPS, with Ultra averaging 85 FPS, making it fully playable at maximum quality. At 2560x1440, High settings run at 88.5 FPS, which is excellent, but Ultra falls to 56.9 FPS, just below the 60 FPS target. Players who want 1440p Ultra would need to accept a slight dip below the threshold or reduce settings. At 3840x2160, the system maintains 60 FPS only on Low (82.7 FPS) and Medium (72.3 FPS). High and Ultra are not playable at 4K, with averages of 49.1 and 33.1 FPS respectively. The data shows that this hardware is best suited for 1080p and 1440p gaming, where it can handle high-quality settings with ease, while 4K requires lower presets to stay smooth.

FAQ

Q: Can this system run Archeage at 4K resolution?

A: Yes, but only on Low or Medium settings. Low averages 82.7 FPS and Medium averages 72.3 FPS at 3840x2160. High and Ultra fall short at 49.1 FPS and 33.1 FPS, respectively.

Q: What is the highest preset that maintains 60 FPS at 2560x1440?

A: High settings, which average 88.5 FPS. Ultra drops to 56.9 FPS, which is below the 60 FPS threshold.

Q: How does the RTX 4070 compare to its nearest rival in terms of benchmark scores?

A: The RTX 4070 scores 37648 on average, which is 0.1% higher than the NVIDIA Tesla P4 (37628) and 0.4% lower than the AMD Radeon RX Vega 56 (37507). The RTX 4080 Mobile is 1.3% faster, scoring 38135.

Q: Is the i7-13700K a bottleneck for the RTX 4070 in this game?

A: No, the data does not indicate a CPU bottleneck. The i7-13700K ranks in the 89th percentile of all CPUs, and its nearest rival, the AMD Ryzen 9 5900, is only 0.2% different in average score. The frame rate scaling across resolutions points to the GPU as the primary limiter at higher settings.

Q: What is the playable threshold and how many settings pass it at 1080p?

A: The playable threshold is 60 FPS. At 1920x1080, all four presets pass: Low (214.1 FPS), Medium (186.3 FPS), High (130 FPS), and Ultra (85 FPS).

Q: What is the rank of this CPU-GPU combination for Archeage?

A: It ranks 814th out of 3708 tested combinations, which places it in the top 22% of all hardware pairings for this game.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 85 FPS. This is the best visual quality available while maintaining smooth gameplay.

At 2560x1440, the highest preset meeting the 60 FPS requirement is High, with an average of 88.5 FPS. Ultra is not viable, as it drops to 56.9 FPS.

At 3840x2160, Medium is the best preset that clears 60 FPS, averaging 72.3 FPS. Low also works at 82.7 FPS, but Medium offers better visual fidelity without sacrificing the frame rate target. High and Ultra are not recommended at 4K.