Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
156 FPS
Ultra 1080p Measured
64 FPS

1440p (2K / QHD)

Low 1440p Measured
105 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
61 FPS
Ultra 4K Measured
22 FPS
10.8ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 35,365
Graphics Card
Required 28,463
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 36 49 61
1440p QHD 43 65 94 105
1080p Full HD 64 93 133 156

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 93
1920x1080 Low 156
1920x1080 Medium 133
1920x1080 Ultra 64
2560x1440 High 65
2560x1440 Low 105
2560x1440 Medium 94
2560x1440 Ultra 43
3840x2160 High 36
3840x2160 Low 61
3840x2160 Medium 49
3840x2160 Ultra 22

Performance Analysis: Archeage on Your System

The Intel Core i7-12700KF paired with the NVIDIA GeForce RTX 4060 is a mid-range desktop combination facing Archeage, an MMORPG originally released in 2014. The CPU sits in the 85th percentile of all processors, while the GPU lands in the 61st percentile — a CPU-forward pairing that nevertheless has more than enough headroom for a game of this age. Measured data across 1080p, 1440p, and 4K shows a clear picture: this combo runs Archeage without strain at lower resolutions and remains playable at 4K with settings turned down.

Measured FPS Breakdown

Starting at 1920x1080, the results are decisive. Low settings average 155.7 FPS, Medium climbs in at 133.4 FPS, High holds 92.9 FPS, and even the Ultra preset stays above the 60 FPS threshold at 64.2 FPS average. Every single preset at 1080p clears the playable bar — there is no combination of settings at this resolution where the combo struggles. That 64.2 FPS Ultra figure matters most, because it means players can maximize image quality and still get a 60 FPS experience.

At 2560x1440, three of four presets stay playable. Low averages 105.2 FPS, Medium 93.6 FPS, and High 64.8 FPS — the last of those just over the threshold. Ultra drops to 42.9 FPS, which is below the 60 FPS mark and noticeably short of it. The gap between High and Ultra at 1440p is the largest single settings jump in the dataset, so if you're gaming at this resolution, High is the ceiling.

At 3840x2160, the RTX 4060's limits show. Low averages 60.6 FPS — barely above the threshold. Medium falls to 49.3 FPS, High to 35.9 FPS, and Ultra bottoms out at 22.4 FPS. Only the Low preset is playable at native 4K, and even then with almost no margin. The minimum and maximum frame rates were not recorded for any configuration, so these averages are the full picture; dips below the average at 4K Low should be expected given the thin margin above 60.

The scaling pattern is consistent: each step up in resolution costs roughly a third of the frame rate at any given preset, and Ultra is disproportionately expensive compared to the jump from Low to Medium. The game is CPU-tolerant in these results — the i7-12700KF's single-thread performance (1043 in 3DMark single-thread, 4071 in Cinebench R23 single-core) is never a bottleneck at these frame rates.

FAQ

Q: Can the i7-12700KF + RTX 4060 run Archeage at 60 FPS?

A: Yes at 1080p and 1440p, conditionally at 4K. At 1920x1080 every preset from Low through Ultra averages at or above 64.2 FPS. At 2560x1440, Low (105.2 FPS), Medium (93.6 FPS), and High (64.8 FPS) all clear 60 FPS. At 3840x2160, only Low qualifies at 60.6 FPS.

Q: What is the highest settings preset that stays above 60 FPS at 1080p?

A: Ultra, averaging 64.2 FPS. Archeage at 1080p Ultra is fully playable on this combo, so there is no reason to compromise on settings at that resolution.

Q: Is 4K gaming viable on this hardware in Archeage?

A: Marginally. Native 3840x2160 on the Low preset averages 60.6 FPS, with no buffer to spare. Medium at 4K drops to 49.3 FPS, below the playable threshold.

Q: Which component is more likely to limit performance?

A: The GPU. The i7-12700KF ranks in the 85th percentile of all CPUs, while the RTX 4060 sits in the 61st percentile of GPUs. The frame rate falls as resolution rises — a hallmark of GPU limitation — and the CPU's benchmark scores (9983 in 3DMark max-threads, 28838 in Cinebench R23 multi-core) are far beyond what this game demands.

Q: How does this pairing rank against other tested combinations for this game?

A: It ranks 1986 out of 3708 tested combos — just past the midpoint, so roughly mid-pack.

Q: Does Archeage's age make it easier to run?

A: The measured data suggests yes. Released in 2014, the game is handled comfortably at 1080p on every preset by this mid-range pairing, with frame rates exceeding 100 FPS on the lower presets.

Similar Performance Alternatives

On the CPU side, the i7-12700KF's nearest rivals are all within a fraction of a percent of its average benchmark score of 35365. The Intel Core i7-13700T averages 35403, a delta of -0.1 percent — statistically identical performance. The Intel Core i5-13600T (35305, +0.2 percent delta) and Intel Core i7-12700K (35287, +0.2 percent delta) would behave the same in this game. The Intel Core 5 213PE at 35428 (-0.2 percent) is another equivalent. In practice, any of these processors paired with an equivalent GPU would produce indistinguishable Archeage results, because the game's bottleneck here is on the graphics side.

On the GPU side, the RTX 4060's average benchmark score of 17639 puts it near the AMD Radeon HD 7790 (17666, -0.2 percent delta), AMD Radeon 780M (17588, +0.3 percent), AMD Radeon Pro 560 (17551, +0.5 percent), and AMD Radeon Pro 460 (17509, +0.7 percent). A system built around any of these graphics solutions with a comparable CPU would land within a couple of frames per second at every resolution and preset in this dataset.

How This Combo Ranks

Out of 3708 tested hardware combinations in Archeage, this pairing ranks 1986th. That places it slightly below the midpoint — the bottom half, but only just. That ranking may read as unflattering, but the context matters: this is a 2014 MMORPG where plenty of modern and semi-modern combinations post enormous frame rates, compressing the rankings. This combo delivers 155.7 FPS at 1080p Low and clears 60 FPS at Ultra at 1080p, which is the practical performance ceiling most players care about. The mid-pack rank reflects a mid-tier GPU (61st percentile) doing very well against an old title, not a hardware struggle. If ranking position matters for comparison shopping, the near-identical CPU and GPU alternatives listed above would occupy essentially the same rank.

The Verdict

Yes — this PC can run Archeage, and in most configurations it can run it well. The verdict by resolution:

  • 1920x1080: Fully playable at every preset, Low through Ultra. Best setting is Ultra at 64.2 FPS average.
  • 2560x1440: Playable at Low, Medium, and High. Best setting is High at 64.8 FPS average. Ultra at 42.9 FPS does not clear the bar.
  • 3840x2160: Playable only at Low, at 60.6 FPS average. Medium (49.3 FPS), High (35.9 FPS), and Ultra (22.4 FPS) all fall short.

The practical takeaway: for 1080p and 1440p players, this combo handles Archeage with settings maxed or near-maxed. For 4K players, it works but only on the lowest preset with virtually no margin, so a resolution drop to 1440p is the smarter play.

Best Settings per Resolution

  • 1920x1080 — Ultra, 64.2 FPS average. The most demanding preset in the game still holds above 60 FPS. Use it.
  • 2560x1440 — High, 64.8 FPS average. High is the most demanding preset that stays at or above the threshold; Ultra drops to 42.9 FPS and should be avoided at this resolution.
  • 3840x2160 — Low, 60.6 FPS average. Low is the only preset that clears 60 FPS at native 4K, and the margin is thin — Medium at 49.3 FPS is already below the line.

The pattern is simple: at 1080p, run everything maxed. At 1440p, drop one notch to High. At 4K, drop to Low or, better, game at 1440p High instead, where the image quality-to-performance balance is far better on this hardware.