Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

93%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
250 FPS
Ultra 1080p Measured
115 FPS

1440p (2K / QHD)

Low 1440p Measured
191 FPS
Ultra 1440p Measured
78 FPS

4K (Ultra HD)

Low 4K Measured
108 FPS
Ultra 4K Measured
43 FPS
5.8ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 32,279
Graphics Card
Required 28,463
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 65 96 108
1440p QHD 78 116 172 191
1080p Full HD 115 173 236 250

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 173
1920x1080 Low 250
1920x1080 Medium 236
1920x1080 Ultra 115
2560x1440 High 116
2560x1440 Low 191
2560x1440 Medium 172
2560x1440 Ultra 78
3840x2160 High 65
3840x2160 Low 108
3840x2160 Medium 96
3840x2160 Ultra 43

Performance Analysis: Archeage on Your System

Archeage, the 2014 MMORPG, presents a revealing case for the Intel Core i5-14400F and NVIDIA GeForce RTX 5080 pairing. The measured frame rates show that this combination delivers fluid gameplay at 1080p and 1440p across all settings, while 4K requires a compromise to High to remain above the 60 FPS threshold. The data also exposes a clear shift in system bottleneck depending on resolution and preset, making this a useful example of how CPU and GPU roles evolve in a massively multiplayer environment.

Similar Performance Alternatives

The Intel Core i5-14400F sits in the 83rd percentile of all CPUs based on average benchmark scores, and its closest rivals are all within a very narrow margin. The AMD Ryzen 7 PRO 8840U averages 32,233 points, just 0.1% behind the i5-14400F’s 32,279 average. The Intel Core i9-11900 is only 0.2% slower, while the AMD Ryzen 7 6800HS is 0.2% faster (32,354). The Intel Core i7-12800H trails by 0.5% with a score of 32,121. For practical purposes, any of these CPUs would deliver nearly identical frame rates in Archeage, since their synthetic scores are effectively indistinguishable.

On the GPU side, the RTX 5080 holds the 87th percentile among all graphics cards, with an average benchmark score of 56,083. Its nearest rivals are similarly close: the AMD Radeon 8060S scores 55,757 (0.6% lower), the AMD Radeon RX 6750 GRE 12 GB scores 55,698 (0.7% lower), and the AMD Radeon Pro W5700X is 2.3% behind at 54,828. The AMD Radeon RX 9070 GRE is the only one ahead, with 57,367 points (2.2% higher). The data suggests that swapping the RTX 5080 for any of these near-identical GPUs would produce frame rates within a few percentage points of the measured results. For a game like Archeage, where the GPU workload is relatively moderate at lower resolutions, these differences would likely be imperceptible in practice.

The combination of a top-83rd-percentile CPU and a top-87th-percentile GPU means that this build is comfortably above the median of tested hardware. However, the measured FPS in Archeage shows that the game is not purely GPU-bound at every resolution, which is where the alternatives become interesting.

Best Settings per Resolution

The measured data defines exactly which settings maintain a playable frame rate, using a 60 FPS threshold. At 3840x2160, the most demanding preset that stays above 60 FPS is High, with an average of 64.7 FPS. Medium also clears the threshold at 96.1 FPS, and Low reaches 107.7 FPS, but Ultra drops to 42.5 FPS—well below the target. So the best setting at 4K is High, and it just barely crosses the line.

At 2560×1440, the situation is more generous. Ultra is playable with an average of 78.4 FPS, and High, Medium, and Low all exceed 100 FPS (116.2, 171.9, and 191.1 respectively). The data shows that the GPU has enough headroom at this resolution to handle the highest preset without compromise.

At 1920×1080, the system is even more comfortable. Ultra delivers 114.7 FPS on average, while High hits 172.5, Medium 235.7, and Low 250.1. All settings are far above the 60 FPS threshold, so the only meaningful choice is between Ultra and the others—and Ultra still leaves a huge margin.

These numbers imply that the RTX 5080 is overkill for Archeage at 1080p, but at 4K it is stretched to its limit on Ultra. The 42.5 FPS at 4K Ultra is the single non-playable measurement in the entire set.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component is more critical in different scenarios. At 1080p Low, the system produces 250.1 FPS. Dropping to 1440p Low reduces that to 191.1 FPS—a 24% decrease. At 4K Low, the frame rate falls to 107.7 FPS, another 44% drop from 1440p. The consistent halving of FPS when resolution doubles suggests the GPU is the primary limiter even at low settings.

When settings are raised to Ultra, the pattern shifts. At 1080p Ultra, the system manages 114.7 FPS. At 1440p Ultra, it falls to 78.4 FPS (a 32% drop), and at 4K Ultra it collapses to 42.5 FPS (a 46% drop from 1440p). The absolute frame rate at 4K Ultra is less than half of the 1080p Ultra result, indicating that the GPU’s pixel fill rate is the dominant constraint. The RTX 5080’s 16 GB of GDDR7 memory and 960 GB/s bandwidth are ample for most games, but the sheer pixel count of 4K combined with ultra settings pushes it past its limits.

At 1080p, the CPU begins to matter more. The difference between Low and Ultra at 1080p is 135.4 FPS (from 250.1 to 114.7), which is a 54% reduction. At 4K, the same settings change yields a 65.2 FPS drop (from 107.7 to 42.5), a 60% reduction. This steeper relative decline at higher resolutions suggests that the GPU is increasingly the bottleneck as pixel count grows. Conversely, at 1080p the CPU has a stronger influence because the GPU is capable of delivering extremely high frame rates; the i5-14400F’s 10 cores and 16 threads, with a boost clock of 4.70 GHz, are sufficient to feed the GPU but not unlimited. The CPU’s single-core Cinebench R23 score of 3,055 points is not exceptional, and that likely explains why 1080p Low cannot reach 300 FPS.

The data also shows that the game is not CPU-limited at higher resolutions. At 4K, the frame rates scale closely with pixel count, which is the signature of a GPU-bound workload. The Intel Core i5-14400F’s launch MSRP was $196, and the RTX 5080 launched at $999 MSRP—these figures underline the system’s positioning as a high-end desktop combo, but they do not alter the benchmark conclusions.

FAQ

Q: What is the highest setting that maintains 60 FPS at 3840×2160?

A: High, which averages 64.7 FPS. Medium and Low are also playable (96.1 and 107.7 FPS), but Ultra falls to 42.5 FPS.

Q: Can this system run Archeage at 2560×1440 with Ultra settings?

A: Yes. The measured average is 78.4 FPS, comfortably above the 60 FPS threshold.

Q: What is the average frame rate at 1080p with Low settings?

A: 250.1 FPS—the highest of any resolution/setting combination tested.

Q: How does the Intel Core i5-14400F compare to its nearest CPU rival?

A: It is 0.1% faster than the AMD Ryzen 7 PRO 8840U (32,279 vs 32,233 average benchmark score) and 0.2% slower than the AMD Ryzen 7 6800HS.

Q: Is the RTX 5080’s nearest GPU rival significantly slower?

A: The AMD Radeon RX 9070 GRE is 2.2% faster (57,367 vs 56,083), while the AMD Radeon 8060S is 0.6% slower. None are large gaps.

Q: What is the combo’s overall rank in Archeage?

A: It ranks 189th out of 3,708 tested combinations, placing it in the upper tier of systems.

Measured FPS Breakdown

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840×2160 | High | 64.7 |

| 3840×2160 | Low | 107.7 |

| 3840×2160 | Medium | 96.1 |

| 3840×2160 | Ultra | 42.5 |

| 2560×1440 | High | 116.2 |

| 2560×1440 | Low | 191.1 |

| 2560×1440 | Medium | 171.9 |

| 2560×1440 | Ultra | 78.4 |

| 1920×1080 | High | 172.5 |

| 1920×1080 | Low | 250.1 |

| 1920×1080 | Medium | 235.7 |

| 1920×1080 | Ultra | 114.7 |

No minimum or maximum frame rate data was recorded; the averages above are the complete dataset.

How This Combo Ranks

Out of 3,708 tested system combinations for Archeage, the Intel Core i5-14400F + RTX 5080 lands at rank 189. That places it in the top 2% of all tested setups, though the exact percentile is not provided. The CPU itself sits in the 83rd percentile of all CPUs, and the GPU in the 87th percentile of all GPUs, reinforcing that this is a high-tier system. The rank is not the highest—there are 188 other combinations that achieve better results—but the measured FPS shows that the bottleneck is almost entirely at 4K Ultra, where the GPU is pushed beyond its limits. For 1080p and 1440p, this combination ranks among the most capable, with only a few more powerful GPUs or CPUs producing higher frame rates.

The Verdict

This PC can run Archeage without issue at 1080p and 1440p. The verdict by resolution is clear: at 1920×1080, all four settings are playable, with Ultra averaging 114.7 FPS. At 2560×1440, Ultra is also playable at 78.4 FPS. At 3840×2160, the system can handle High, Medium, and Low—but not Ultra, which falls to 42.5 FPS. The best playable setting at 4K is High, with 64.7 FPS, which is just above the threshold. If the goal is to play at 4K Ultra, the RTX 5080 alone is insufficient; the user would need a more powerful GPU or to accept a lower preset. For most players, the combination of the i5-14400F and RTX 5080 delivers a very smooth experience in Archeage, with only the most demanding 4K Ultra setting requiring a sacrifice.