Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
136 FPS
Ultra 1080p Measured
56 FPS

1440p (2K / QHD)

Low 1440p Measured
91 FPS
Ultra 1440p Measured
38 FPS

4K (Ultra HD)

Low 4K Measured
52 FPS
Ultra 4K Measured
22 FPS
12.2ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 32,279
Graphics Card
Required 28,463
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 32 47 52
1440p QHD 38 55 81 91
1080p Full HD 56 82 121 136

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 82
1920x1080 Low 136
1920x1080 Medium 121
1920x1080 Ultra 56
2560x1440 High 55
2560x1440 Low 91
2560x1440 Medium 81
2560x1440 Ultra 38
3840x2160 High 32
3840x2160 Low 52
3840x2160 Medium 47
3840x2160 Ultra 22

Performance Analysis: Archeage on Your System

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5050 delivers a playable Archeage experience at 1080p and 1440p, but it falls short of the 60 FPS threshold at 4K. At 1920x1080, the combo reaches an average of 82 FPS on High settings, while at 2560x1440 it manages 81 FPS on Medium. The 3840x2160 resolution is not playable at any setting, with the best average being 52 FPS on Low. The data indicates a clear performance ceiling at higher resolutions, making this combination suitable for mainstream gaming displays rather than 4K monitors.

Measured FPS Breakdown

At 1920x1080, the measured frame rates show a wide spread across presets. Low settings produce an average of 136 FPS, which is the highest recorded for this combo. Medium settings yield 121 FPS average, with a minimum of 103 FPS and a maximum of 139 FPS. High settings drop to 82 FPS average, while Ultra settings fall below the playable threshold at 56 FPS average. The gap between Low and Medium is 15 FPS, while the drop from Medium to High is 39 FPS, indicating a significant performance cost for the High preset.

Moving to 2560x1440, the averages decline noticeably. Low settings produce 91 FPS, which remains comfortably above the 60 FPS threshold. Medium settings deliver 81 FPS average, with a minimum of 69 FPS and a maximum of 93 FPS. High settings drop to 55 FPS, just below the playable mark, and Ultra settings fall to 38 FPS. The scaling from 1080p to 1440p shows a reduction of 45 FPS for Low, 40 FPS for Medium, 27 FPS for High, and 18 FPS for Ultra.

At 3840x2160, none of the presets achieve 60 FPS. Low settings produce 52 FPS average, Medium settings deliver 47 FPS with a minimum of 40 FPS and a maximum of 53 FPS, High settings drop to 32 FPS, and Ultra settings fall to 22 FPS. The 4K results are consistently below the playable threshold, with the gap between Low and Ultra being 30 FPS. The minimum FPS data available only for Medium settings at each resolution shows 103 FPS at 1080p, 69 FPS at 1440p, and 40 FPS at 4K, illustrating how frame dips become more pronounced at higher resolutions.

CPU and GPU Roles

The benchmark data reveals that the GPU becomes the primary bottleneck as resolution increases. At 1920x1080, the CPU's 10 cores and 16 threads appear sufficient to feed the RTX 5050, evidenced by the 136 FPS average on Low settings. The transition to 2560x1440 shows a 33% reduction in Low-settings performance, dropping to 91 FPS, which points to the GPU's rendering load growing faster than the CPU's frame delivery capacity.

The 4K results confirm the GPU-limited nature of this pairing. At 3840x2160, even Low settings only reach 52 FPS, a 43% drop from 1440p Low. The RTX 5050's 8 GB GDDR6 memory and 128-bit bus width appear insufficient for the pixel throughput required at 4K, regardless of the CPU's ability to compute game logic. The CPU's Cinebench R23 multi-core score of 21645 and single-core score of 3055 indicate strong processing power, but this does not translate into playable 4K frame rates.

The preset scaling further clarifies the roles. At 1080p, going from Low to Ultra costs 80 FPS, while at 1440p the same change costs 53 FPS, and at 4K the cost is 30 FPS. This narrowing delta suggests that at higher resolutions, the GPU is already saturated at Low settings, so additional graphical features have diminishing absolute impact. Conversely, at 1080p, the GPU has more headroom, making preset changes more impactful on frame rates. The CPU's Passmark multi-thread score of 25470 and single-thread score of 3701 show it is not the limiting factor at any resolution, as even the lowest GPU-bound frame rates exceed the CPU's minimum frame delivery.

Similar Performance Alternatives

For the CPU, the Intel Core i5-14400F's average benchmark score of 32279 places it near several alternatives. The AMD Ryzen 7 PRO 8840U scores 32233, a 0.1% difference, meaning it would behave nearly identically in Archeage. The Intel Core i9-11900 scores 32226, a 0.2% difference, also effectively equivalent. The AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher, and the Intel Core i7-12800H scores 32121, 0.5% lower. These four rivals represent the closest performance envelope, with all deltas under 1%, so swapping to any of them would produce indistinguishable frame rates in this game.

For the GPU, the NVIDIA GeForce RTX 5050 has an average benchmark score of 21035. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher, making it a near-identical substitute. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower, while the NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. All four rivals fall within a 1.6% range of the RTX 5050, so any of them would deliver similar Archeage performance, with the RX 5600 XT being the closest match on the lower side and the RTX A4000 Mobile on the higher side.

The combination of a CPU from the 0.5% delta range and a GPU from the 1.6% delta range would produce frame rates within a few FPS of the measured results. For instance, pairing the i5-14400F with an RX 5600 XT would likely yield 1080p High performance around 82 FPS, while using an i7-12800H with an RTX A4000 Mobile could push that slightly higher. The data does not support any of these alternatives breaking the 4K barrier, as the GPU-side limitations remain consistent across the rival group.

FAQ

Q: Can this combo run Archeage at 4K with playable frame rates?

A: No. At 3840x2160, the highest average FPS is 52 on Low settings, which is below the 60 FPS playable threshold. Medium settings produce 47 FPS, High produces 32 FPS, and Ultra produces 22 FPS. The verdictByResolution data lists no playable settings for 4K.

Q: What is the best setting for 2560x1440 that stays above 60 FPS?

A: Medium settings deliver 81 FPS average, with a minimum of 69 FPS and a maximum of 93 FPS. Low settings also remain playable at 91 FPS, but Medium is the highest preset that stays at or above 60 FPS.

Q: How does the CPU compare to its nearest rivals in raw performance?

A: The Intel Core i5-14400F has an average benchmark score of 32279. The nearest rivals are the AMD Ryzen 7 PRO 8840U (32233, 0.1% lower), Intel Core i9-11900 (32226, 0.2% lower), AMD Ryzen 7 6800HS (32354, 0.2% higher), and Intel Core i7-12800H (32121, 0.5% lower). All are within 0.5% of each other.

Q: Is the GPU or CPU more important for this game at 1080p?

A: The GPU is more important. At 1920x1080, dropping from Ultra (56 FPS) to Low (136 FPS) changes performance by 80 FPS, while the CPU's strong multi-core score of 21645 in Cinebench R23 indicates it is not the limiting factor. The scaling between presets is driven by GPU load.

Q: What is the highest resolution at which this combo can play Archeage on High settings?

A: The highest resolution with a playable High preset is 1920x1080, where it averages 82 FPS. At 2560x1440, High settings drop to 55 FPS, which is below the 60 FPS threshold.

Q: How does the RTX 5050 compare to the RX 5600 XT in benchmark terms?

A: The RTX 5050 has an average benchmark score of 21035, while the AMD Radeon RX 5600 XT scores 20713, a 1.6% difference. This makes the RX 5600 XT the closest lower-performing rival, with expected frame rates slightly below the RTX 5050 in Archeage.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, which produces an average of 82 FPS. This is the recommended setting for 1080p, as it provides a comfortable margin above the playable threshold while delivering better visual quality than Medium (121 FPS) or Low (136 FPS). Ultra settings at 56 FPS fall below the threshold and should be avoided.

At 2560x1440, the best playable setting is Medium, with an average of 81 FPS. This preset maintains a minimum of 69 FPS, ensuring frame dips stay above the 60 FPS mark. Low settings also work at 91 FPS, but Medium offers superior visuals without sacrificing playability. High settings at 55 FPS and Ultra at 38 FPS are not recommended.

At 3840x2160, no preset achieves 60 FPS, so there is no recommended best setting. The closest is Low at 52 FPS, but the verdictByResolution data confirms that no playable settings exist for this resolution. Users should consider lowering the resolution to 1440p for a playable experience.

How This Combo Ranks

The Intel Core i5-14400F and NVIDIA GeForce RTX 5050 combination ranks 2279 out of 3708 tested combos in Archeage. This places it in the lower half of the benchmark database, with roughly 61% of tested combos performing better. The ranking reflects the 4K limitations and the 1080p/1440p performance that is solid but not exceptional.

The rank is consistent with the measured FPS data. At 1080p High, the 82 FPS average is respectable, but many higher-end combos would exceed 100 FPS at the same settings. The 4K results, capped at 52 FPS on Low, drag the overall ranking down, as combos with more powerful GPUs achieve playable 4K frame rates. The CPU's 83rd percentile ranking among all CPUs (avg benchmark score 32279) and the GPU's 66th percentile among all GPUs (avg benchmark score 21035) suggest the pairing is balanced, but both components sit in the mid-range, which explains the mid-pack ranking.

Compared to the nearest rival combos, the i5-14400F and RTX 5050 would likely trade places with systems using an RX 5600 XT or RTX A4000 Mobile, given the 1.6% GPU score deltas. The ranking of 2279 out of 3708 indicates that while this combo is fully capable of playing Archeage at mainstream resolutions, it is not positioned for high-refresh-rate or 4K gaming. For users targeting 1080p or 1440p at medium-to-high settings, the measured performance is adequate, but the overall rank reflects the hardware's mid-tier status in the broader benchmark landscape.