Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
153 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
103 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
59 FPS
Ultra 4K Measured
24 FPS
10.9ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 32,279
Graphics Card
Required 28,463
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 36 52 59
1440p QHD 42 62 91 103
1080p Full HD 63 92 136 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 92
1920x1080 Low 153
1920x1080 Medium 136
1920x1080 Ultra 63
2560x1440 High 62
2560x1440 Low 103
2560x1440 Medium 91
2560x1440 Ultra 42
3840x2160 High 36
3840x2160 Low 59
3840x2160 Medium 52
3840x2160 Ultra 24

Performance Analysis: Archeage on Your System

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 4060 delivers a playable Archeage experience at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K. At 1920x1080, the combination achieves a 63 FPS average on Ultra settings, while at 2560x1440 it reaches 62 FPS on High settings. The 4K resolution proves too demanding, with the highest playable preset (Medium) averaging only 52 FPS. This configuration ranks 2001st out of 3708 tested combos for this game, placing it in the upper-middle tier of hardware pairings.

Measured FPS Breakdown

At 3840x2160, the i5-14400F and RTX 4060 produce a narrow band of results. Low settings yield a 59 FPS average, which sits just one frame below the playable threshold. Medium settings drop to 52 FPS average, with a minimum of 45 FPS and a maximum of 60 FPS. High settings fall further to 36 FPS average, and Ultra settings bottom out at 24 FPS average. The spread from Low to Ultra spans 35 FPS, indicating that resolution scaling places significant strain on the GPU.

The 2560x1440 results show a dramatic improvement over 4K. Low settings deliver 103 FPS average, which is nearly double the 4K Low figure. Medium settings achieve 91 FPS average, with a minimum of 78 FPS and a maximum of 105 FPS. High settings maintain a 62 FPS average, comfortably clearing the 60 FPS bar. Ultra settings, however, drop to 42 FPS average, making them unsuitable for smooth gameplay. The gap between Low and Ultra here is 61 FPS, demonstrating how preset selection becomes more impactful as resolution decreases.

At 1920x1080, the hardware shows its strongest performance. Low settings produce 153 FPS average, which is the highest score recorded across all resolutions and presets. Medium settings follow at 136 FPS average, with a minimum of 115 FPS and a maximum of 156 FPS. High settings achieve 92 FPS average, and even Ultra settings maintain a 63 FPS average. The difference between Low and Ultra at 1080p is 90 FPS, showing that the RTX 4060 has ample headroom at this resolution. Notably, Ultra at 1080p outperforms High at 1440p by just 1 FPS, suggesting diminishing returns from preset increases at higher resolutions.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS playable threshold. The closest option is Low settings with a 59 FPS average, which narrowly misses the mark. Medium settings at 52 FPS and High at 36 FPS are progressively worse, while Ultra at 24 FPS is far from acceptable. Based on the data, 4K gaming is not viable with this configuration for Archeage.

At 2560x1440, the best playable setting is High, which delivers a 62 FPS average. This preset clears the 60 FPS threshold with a small margin. Medium settings at 91 FPS offer a more comfortable buffer but at lower visual quality, while Low at 103 FPS maximizes frame rate. Ultra at 42 FPS is not playable. The choice between High and Medium depends on whether visual fidelity or frame rate stability takes priority, but High is the highest preset that remains playable.

At 1920x1080, Ultra settings achieve a 63 FPS average, making it the best playable option. This preset provides maximum visual quality while staying above the 60 FPS threshold. High settings at 92 FPS, Medium at 136 FPS, and Low at 153 FPS all offer progressively higher frame rates for users who prefer smoother motion. Since Ultra clears the threshold with a 3 FPS margin, it is the recommended choice for 1080p gaming.

CPU and GPU Roles

The benchmark data reveals how the balance between CPU and GPU shifts across resolutions. At 3840x2160, the GPU is the clear bottleneck, as the RTX 4060's 8 GB memory and 128-bit bus struggle with the pixel count. The frame rate drops from 59 FPS at Low to 24 FPS at Ultra, a 59% reduction that reflects pure GPU workload scaling. The i5-14400F's 10 cores and 16 threads are sufficient at this resolution, as the GPU saturates before the CPU becomes a limiting factor.

At 2560x1440, the scaling pattern changes. Low settings hit 103 FPS, while Ultra falls to 42 FPS, a 59% drop similar to 4K. However, the absolute numbers are higher, indicating that the GPU has more headroom to execute the workload. The CPU begins to show influence at lower presets, where the frame rate exceeds 100 FPS and the processor's single-core performance (3055 in Cinebench R23 single-core) becomes more relevant. At High settings with 62 FPS, the load is more balanced between components.

At 1920x1080, both components contribute significantly. Low settings achieve 153 FPS, which tests the CPU's ability to feed frames quickly. The i5-14400F's PassMark single-thread score of 3701 and multithread score of 25470 support high frame rates. At Ultra settings with 63 FPS, the GPU takes on more responsibility, but neither component dominates. The 1080p results show the most balanced utilization, with the CPU handling draw calls and the GPU rendering the scene. The transition from 1080p Medium (136 FPS) to 1440p Medium (91 FPS) represents a 33% reduction, while 1440p to 4K Medium (52 FPS) is a 43% reduction, indicating the GPU's memory bandwidth limitations become more pronounced at higher resolutions.

The Verdict

This PC can run Archeage at 1080p and 1440p with playable frame rates, but not at 4K. At 1920x1080, the configuration clears the 60 FPS threshold on every preset, including Ultra at 63 FPS. This makes 1080p Ultra the recommended setup for full visual quality without sacrificing smoothness. At 2560x1440, High settings deliver 62 FPS, which is playable, while Medium at 91 FPS and Low at 103 FPS offer higher frame rates. Ultra at 1440p fails to reach 60 FPS with a 42 FPS average, so it should be avoided.

At 3840x2160, the hardware cannot maintain 60 FPS on any preset. Low settings come closest at 59 FPS, but this falls one frame short of the playable threshold. Medium at 52 FPS and High at 36 FPS are progressively worse, and Ultra at 24 FPS is unplayable. Users seeking 4K performance would need to lower resolution or accept reduced visual settings. The combination of the i5-14400F and RTX 4060 is well-matched for 1080p and capable at 1440p, but the GPU's 8 GB memory and 272.0 GB/s bandwidth limit 4K potential.

Similar Performance Alternatives

The i5-14400F's nearest rivals show that similar CPU performance can come from various platforms. The AMD Ryzen 7 PRO 8840U scores within 0.1% of the i5-14400F, making it a close equivalent for gaming workloads. The Intel Core i9-11900 is 0.2% slower, while the AMD Ryzen 7 6800HS is 0.2% faster. The Intel Core i7-12800H is 0.5% slower. These alternatives would produce nearly identical frame rates in Archeage, as the CPU is not the primary bottleneck at most settings.

For the RTX 4060, the nearest rivals exhibit small performance deltas. The AMD Radeon HD 7790 is 0.2% slower, while the AMD Radeon 780M is 0.3% faster. The AMD Radeon Pro 560 is 0.5% faster, and the AMD Radeon Pro 460 is 0.7% faster. These GPUs would deliver roughly the same FPS in Archeage, meaning the measured results for the RTX 4060 would apply to these cards within a margin of 1-2 frames. The parity among these options suggests that users with any of these GPUs would see similar playability at each resolution.

FAQ

Q: Can this PC run Archeage at 4K with playable frame rates?

A: No. At 3840x2160, the highest average FPS is 59 on Low settings, which falls below the 60 FPS threshold. Medium averages 52 FPS, High averages 36 FPS, and Ultra averages 24 FPS.

Q: What is the best setting at 2560x1440?

A: High settings provide a 62 FPS average, which is the highest preset that clears the 60 FPS threshold. Medium at 91 FPS and Low at 103 FPS are also playable, but Ultra at 42 FPS is not.

Q: Does the CPU or GPU matter more at 1080p?

A: At 1920x1080, both components play significant roles. Low settings reach 153 FPS, testing the CPU's single-thread performance, while Ultra at 63 FPS shifts more load to the GPU. The balance is relatively even at this resolution.

Q: How does the RTX 4060 compare to its nearest rivals in this game?

A: The AMD Radeon 780M is 0.3% faster, the AMD Radeon Pro 560 is 0.5% faster, and the AMD Radeon Pro 460 is 0.7% faster. The AMD Radeon HD 7790 is 0.2% slower. These differences would result in nearly identical FPS.

Q: Is Ultra settings playable at 1080p?

A: Yes, Ultra at 1920x1080 achieves a 63 FPS average, which clears the 60 FPS threshold by 3 FPS. This is the highest preset tested at this resolution.

Q: What is the lowest playable resolution for this configuration?

A: All tested resolutions below 4K are playable. At 2560x1440, the playable presets include High, Medium, and Low, while at 1920x1080, all presets including Ultra are playable. 4K has no playable presets.