Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 21 | 29 | 38 | 48 |
| 1440p QHD | 33 | 50 | 72 | 79 |
| 1080p Full HD | 49 | 69 | 103 | 117 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 2060 delivers a solid 1080p experience for Archeage, but higher resolutions demand significant settings compromises. At 1920x1080, the combo comfortably clears the 60 FPS threshold at High settings, while 2560x1440 requires dropping to Medium. 4K is not viable for smooth gameplay, as even Low settings fall short of the playable mark. The recorded data positions this system as a mid-range performer, ranking 2883 out of 3708 tested combinations for this title.
Best Settings per Resolution
Based on the measured average frame rates, the most demanding preset that stays at or above 60 FPS at each resolution is as follows:
- 1920x1080: High settings, averaging 68.7 FPS. This is the highest visual quality that maintains playable performance at the most common resolution.
- 2560x1440: Medium settings, averaging 71.7 FPS. While Low settings achieve a higher average (79.4 FPS), Medium offers a better visual experience while still staying above the 60 FPS threshold.
- 3840x2160: No playable settings. The highest average FPS recorded at 4K is 48 on Low settings, which falls below the 60 FPS playable threshold. High, Medium, and Ultra all produce averages of 28.6, 38.1, and 21.2 FPS respectively, making the game unplayable at this resolution with this hardware.
FAQ
Q: Can this PC run Archeage at 60 FPS on a 1080p monitor?
A: Yes. The measured data shows it achieves 68.7 FPS on High settings, 103.2 FPS on Medium, and 116.8 FPS on Low at 1920x1080. Ultra settings drop to 48.8 FPS, which is below the 60 FPS threshold.
Q: What is the best settings preset for 1440p gaming?
A: Medium is the best playable option at 2560x1440, delivering an average of 71.7 FPS. Low settings are also playable at 79.4 FPS, but High (49.5 FPS) and Ultra (32.8 FPS) do not meet the 60 FPS requirement.
Q: Is 4K gaming possible with the RTX 2060 and i5-14400F?
A: No. At 3840x2160, even the lowest preset only reaches 48 FPS on average. All other presets (Medium 38.1 FPS, High 28.6 FPS, Ultra 21.2 FPS) are far below the playable threshold, so 4K is not a viable option.
Q: How does the RTX 2060 compare to its closest rivals in terms of benchmark scores?
A: The RTX 2060 has an average benchmark score of 15290. Its nearest rival, the NVIDIA GeForce GTX 580, scores 15283 with a 0% delta. The AMD Radeon 680M scores 15270 (0.1% slower), the NVIDIA GeForce RTX 3050 OEM scores 15199 (0.6% slower), and the AMD Radeon RX 7600 scores 15171 (0.8% slower). Performance is essentially identical among these cards.
Q: How does the Intel Core i5-14400F stack up against similar CPUs?
A: The i5-14400F has an average benchmark score of 32279. The AMD Ryzen 7 PRO 8840U scores 32233 (0.1% slower), the Intel Core i9-11900 scores 32226 (0.2% slower), and the AMD Ryzen 7 6800HS scores 32354 (0.2% faster). The Intel Core i7-12800H scores 32121 (0.5% slower). The differences are negligible.
Q: What are the playable resolutions and settings for this system according to the verdict?
A: The verdict indicates that at 1920x1080, High, Low, and Medium settings are playable, with High being the best at 68.7 FPS. At 2560x1440, Low and Medium are playable, with Medium being the best at 71.7 FPS. No settings are playable at 3840x2160.
Measured FPS Breakdown
The following table details the exact average FPS recorded for each resolution and settings preset combination. Minimum and maximum FPS values were not recorded in the database.
| Resolution | Settings | Average FPS |
| :--------- | :------- | ----------: |
| 3840x2160 | Ultra | 21.2 |
| 3840x2160 | High | 28.6 |
| 3840x2160 | Medium | 38.1 |
| 3840x2160 | Low | 48.0 |
| 2560x1440 | Ultra | 32.8 |
| 2560x1440 | High | 49.5 |
| 2560x1440 | Medium | 71.7 |
| 2560x1440 | Low | 79.4 |
| 1920x1080 | Ultra | 48.8 |
| 1920x1080 | High | 68.7 |
| 1920x1080 | Medium | 103.2 |
| 1920x1080 | Low | 116.8 |
The data reveals a clear pattern: frame rates scale predictably with both resolution and preset. Moving from 1920x1080 to 2560x1440 at High settings results in a drop from 68.7 to 49.5 FPS, a reduction of approximately 28%. The gap widens significantly at 4K, where the High preset manages only 28.6 FPS, less than half of the 1080p figure. Within each resolution, the jump from Ultra to Low provides substantial headroom; for instance, at 1440p, the difference between Ultra (32.8 FPS) and Low (79.4 FPS) is over 140%.
Similar Performance Alternatives
Based on the average benchmark scores in the database, several CPUs and GPUs would deliver nearly identical performance to the i5-14400F and RTX 2060 in this game.
For the CPU, the Intel Core i5-14400F scores 32279 on average. The closest alternatives are all within a fraction of a percent:
- AMD Ryzen 7 PRO 8840U: scores 32233, 0.1% slower.
- Intel Core i9-11900: scores 32226, 0.2% slower.
- AMD Ryzen 7 6800HS: scores 32354, 0.2% faster.
- Intel Core i7-12800H: scores 32121, 0.5% slower.
Any of these processors would likely produce the same frame rates in Archeage, as the performance delta is negligible.
For the GPU, the NVIDIA GeForce RTX 2060 has an average score of 15290. Its nearest rivals are similarly close:
- NVIDIA GeForce GTX 580: scores 15283, 0% delta.
- AMD Radeon 680M: scores 15270, 0.1% slower.
- NVIDIA GeForce RTX 3050 OEM: scores 15199, 0.6% slower.
- AMD Radeon RX 7600: scores 15171, 0.8% slower.
The GTX 580, a much older card, matches the RTX 2060 in average score, suggesting that for this specific workload, the difference in architecture does not translate into a measurable performance gap. The RTX 3050 OEM and RX 7600 are also effectively equivalent in this context.
CPU and GPU Roles
The benchmark data shows that resolution scaling is the dominant factor in frame rate changes, which points to the GPU being the primary bottleneck in this configuration. The GPU has a benchmark percentile of 58 versus all GPUs, while the CPU sits at the 83rd percentile versus all CPUs. This discrepancy suggests the RTX 2060 is the limiting component.
When moving from 1920x1080 to 2560x1440 at High settings, the average FPS falls from 68.7 to 49.5, a 28% drop. This substantial decrease is characteristic of GPU-bound rendering, as the pixel count increases by 78% but the frame rate drops by less than that, indicating some headroom in the CPU. The CPU's strong single-thread performance, evidenced by a Passmark single-thread score of 3701, helps maintain playable frame rates even when the GPU is under heavy load.
The trend continues at 4K, where the GPU is pushed further. At 3840x2160 High, the average FPS is 28.6, which is less than half of the 1440p figure. This steep decline confirms that the RTX 2060's compute and memory resources are exhausted as resolution climbs. The GPU's 6 GB of GDDR6 memory on a 192-bit bus with 336.0 GB/s bandwidth is sufficient for 1080p and 1440p High settings, but the data shows it cannot sustain 60 FPS at 4K even on Low.
The CPU's role becomes more apparent at lower resolutions. At 1920x1080 Low, the system achieves 116.8 FPS, which is nearly double the High preset result. This high frame rate indicates the CPU is able to feed the GPU efficiently, allowing it to reach its maximum output. The i5-14400F's 10 cores and 16 threads, along with a boost clock of 4.70 GHz, provide ample processing power for an MMORPG like Archeage, which often relies on single-core performance for game logic and network handling. The CPU's benchmark scores, including a Cinebench R23 multi-core score of 21645, reinforce its capability.
The Verdict
The Intel Core i5-14400F and NVIDIA GeForce RTX 2060 combination can run Archeage, but the playable experience is confined to lower resolutions and settings. At 1920x1080, the system clears the 60 FPS threshold on High, Low, and Medium presets, with High offering the best visual quality at 68.7 FPS. This is the recommended configuration for a smooth experience on a standard monitor.
At 2560x1440, only Low and Medium settings are playable. Medium is the best choice, averaging 71.7 FPS, which provides a good balance between visuals and performance. High and Ultra presets fall below 60 FPS, with averages of 49.5 and 32.8 FPS respectively.
At 3840x2160, the system cannot achieve 60 FPS on any settings preset. The highest recorded average is 48 FPS on Low, which is below the playable threshold. High, Medium, and Ultra all produce averages in the 20s and 30s, rendering 4K unplayable with this hardware.
Overall, this PC is best suited for 1080p gaming with high settings or 1440p gaming with medium settings. The RTX 2060, while ranked in the 58th percentile of all GPUs, is the limiting factor at higher resolutions, and the i5-14400F provides sufficient CPU performance to avoid creating a bottleneck. The recorded data confirms that for Archeage, this is a dependable 1080p system with some 1440p capability.