Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

62%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
153 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
103 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
59 FPS
Ultra 4K Measured
24 FPS
10.9ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 25,292
Graphics Card
Required 28,463
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 36 52 59
1440p QHD 42 62 91 103
1080p Full HD 63 92 136 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 92
1920x1080 Low 153
1920x1080 Medium 136
1920x1080 Ultra 63
2560x1440 High 62
2560x1440 Low 103
2560x1440 Medium 91
2560x1440 Ultra 42
3840x2160 High 36
3840x2160 Low 59
3840x2160 Medium 52
3840x2160 Ultra 24

Performance Analysis: Archeage on Your System

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 4060 delivers a playable experience for Archeage at 1080p and 1440p, but the data indicates the combo falls short of the 60 FPS threshold at 4K. Measured performance shows that while the CPU sits in the 77th percentile among all processors and the GPU in the 61st percentile, the game’s demands at higher resolutions and presets quickly outpace this hardware combination)Skip the 4K Ultra preset, which averages 24 FPS, and even 4K High yields only 36 FPS. The system is clearly optimized for mainstream resolutions, where it offers substantial headroom, but it is not a 4K-capable setup for this title.

Measured FPS Breakdown

At 1920x1080, the combo shows strong performance across all presets. The Low preset averages 153 FPS, while Medium reaches 136 FPS with a minimum of 115 FPS and a maximum of 156 FPS. High settings produce an average of 92 FPS, and the most demanding Ultra preset still clears the playable threshold with an average of 63 FPS. This resolution is where the system has the most room to spare, with even the heaviest settings maintaining a comfortable margin above the 60 FPS target.

Moving to 2560x1440, performance remains solid but the gap between presets widens. Low averages 103 FPS, making it the fastest option. Medium drops to 91 FPS, with a minimum of 78 FPS and a maximum of 105 FPS. High settings average 62 FPS, which is just above the playable threshold of 60 FPS. The Ultra preset falls below playability, averaging only 42 FPS. The data shows a clear pattern: the 1440p High preset is the boundary for smooth gameplay, while Ultra is not viable.

At 3840x2160, the system struggles significantly. Low settings average 59 FPS, which is technically just below the 60 FPS threshold. Medium averages 52 FPS with a minimum of 45 FPS and a maximum of 60 FPS. High drops to 36 FPS, and Ultra falls to 24 FPS. None of the 4K presets achieve a 60 FPS average, indicating that this combination is not suitable for 4K gaming in Archeage. The measured data shows a consistent decline in average FPS as resolution and quality settings increase, with the most pronounced drop occurring between 1440p and 4K.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 63 FPS. This is the highest quality setting available in the measured data, and it maintains a playable frame rate, though with only a 3 FPS margin above the threshold.

For 2560x1440, the best playable setting is High, averaging 62 FPS. The Low and Medium presets also clear 60 FPS, but High offers the best visual quality while still meeting the performance requirement. Ultra falls short at 42 FPS, so it cannot be recommended at this resolution.

For 3840x2160, the verdict data lists no playable settings, as every preset averages below 60 FPS. The closest option is Low at 59 FPS, but since it does not meet the 60 FPS threshold, there is no best setting for 4K. The system cannot deliver a smooth experience at this resolution under any tested preset.

How This Combo Ranks

The Intel Core i5-13400F and NVIDIA GeForce RTX 4060 combination ranks 2001st out of 3708 tested combos for Archeage, placing it in the 54th percentile of all systems tested for this game. This mid-pack ranking reflects the hardware’s mainstream positioning: it outperforms a significant portion of tested systems but is far from the top tier. The data suggests that while this combo handles the game well at 1080p and 1440p, it does so without the extreme performance headroom seen in higher-end configurations. The rank indicates that many other combinations deliver better results, likely at higher resolutions or with more demanding presets, but for the majority of players targeting standard resolutions, this position is more than adequate.

Similar Performance Alternatives

Looking at the CPU’s nearest rivals, the AMD Ryzen 9 6900HS offers an average score of 25284, which is essentially identical to the i5-13400F’s average of 25292, with a deltaPct of 0. The Intel Core 5 120 and AMD Ryzen 5 5600X3D both score slightly higher at 25362 and 25365, respectively, each showing a deltaPct of -0.3, meaning they are marginally faster. The AMD Ryzen 7 6800H scores 25201 with a deltaPct of 0.4, indicating it is slightly slower. In practical terms, any of these processors would deliver near-identical performance in Archeage, as the differences are within a fraction of a percent.

For the GPU, the nearest rival is the AMD Radeon HD 7790, which scores 17666 on average, just 0.2 percent higher than the RTX 4060’s 17639. The AMD Radeon 780M scores 17588, a 0.3 percent difference, while the AMD Radeon Pro 560 and Pro 460 score 17551 and 17509, respectively, with deltas of 0.5 and 0.7 percent. These differences are negligible in real-world gaming, so swapping the RTX 4060 for any of these would result in very similar FPS numbers in Archeage. However, the RTX 4060’s modern architecture and feature set may provide advantages in other titles that are not reflected in these benchmark averages.

FAQ

Q: Can this PC run Archeage at 1920x1080 with maximum settings?

A: Yes. The Ultra preset at 1920x1080 averages 63 FPS, which is above the 60 FPS playable thresholdaint. All four tested presets at this resolution—Low, Medium, High, and Ultra—are listed as playable in the verdict data.

Q: What is the best setting for 2560x1440?

A: The High preset is the best playable option at 2560x1440, averaging 62 FPS. While Low and Medium also clear 60 FPS, High provides superior visual quality while still maintaining a playable frame rate.

Q: Is 4K gaming possible with this hardware?

A: No. The verdict data shows no playable settings at 3840x2160. The highest average FPS at this resolution is 59 on Low settings, which is just below the 60 FPS threshold. All other presets—Medium at 52 FPS, High at 36 FPS, and Ultra at 24 FPS—fall well short.

Q: How does the i5-13400F compare to its nearest rival, the Ryzen 9 6900HS?

A: The two processors have nearly identical average benchmark scores: the i5-13400F scores 25292, while the Ryzen 9 6900HS scores 25284, a deltaPct of 0. In practical terms, there is no measurable performance difference between them for this game.

Q: What is the minimum FPS recorded at 1920x1080 Medium settings?

A: The minimum FPS at 1080p on Medium is 115 FPS, with an average of 136 FPS and a maximum of 156 FPS. This indicates very stable performance without significant frame drops.

Q: Does the RTX 4060’s nearest rival, the Radeon HD 7790, perform similarly?

A: Yes. The Radeon HD 7790 has an average benchmark score of 17666, which is 0.2 percent higher than the RTX 4060’s 17639. The difference is negligible, so frame rates in Archeage would be nearly identical with either GPU.

The Verdict

This PC can run Archeage at 1920x1080 with all presets playable, including Ultra at 63 FPS average. At 2560x1440, the High preset is the best playable option, achieving 62 FPS, while Low and Medium also clear the threshold. The system cannot run the game at 3840x2160, as no preset reaches the 60 FPS target—the closest is Low at 59 FPS. The verdict data confirms that 1080p and 1440p are the viable resolutions for this combo, with 1080p offering full preset flexibility and 1440p requiring a step down from Ultra. For players targeting 4K, this hardware is not sufficient for a smooth experience in Archeage.

CPU and GPU Roles

The data shows that the CPU and GPU have distinct roles depending on resolution. At 1920x1080, the GPU is the primary driver of performance, as evidenced by the wide gap between Low (153 FPS) and Ultra (63 FPS) presets—a 90 FPS difference that scales directly with graphical load. The CPU’s strong single-thread score of 3191 in Cinebench R23 and its 77th percentile ranking provide ample headroom for the game’s logic at this resolution, meaning the GPU becomes the limiting factor as settings increase.

At 2560x1440, the balance shifts slightly. The gap between Low (103 FPS) and Ultra (42 FPS) narrows to 61 FPS, but the absolute numbers drop, indicating that both components are being taxed more heavily. The CPU’s multi-threaded performance, with a Cinebench R23 multi-core score of 22604, keeps the game running at High (62 FPS) without bottlenecking, but the Ultra preset’s 42 FPS shows that the GPU cannot sustain the increased pixel count and shader complexity.

At 3840x2160, the GPU becomes the overwhelming bottleneck. The difference between Low (59 FPS) and Ultra (24 FPS) is 35 FPS, but even the lowest settings cannot reach 60 FPS. The CPU’s performance is largely irrelevant at this resolution, as the RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus width are insufficient for the demands of 4K rendering in this game. The scaling between resolutions—from 153 FPS at 1080p Low to 59 FPS at 4K Low—shows a 61 percent reduction in performance, which aligns with the GPU being the dominant factor at higher resolutions. The CPU’s role is more pronounced at lower resolutions and settings, where its single-thread performance allows the GPU to reach its maximum output.