Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

58%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
121 FPS
Ultra 1080p Measured
47 FPS

1440p (2K / QHD)

Low 1440p Measured
79 FPS
Ultra 1440p Measured
34 FPS

4K (Ultra HD)

Low 4K Measured
46 FPS
Ultra 4K Measured
22 FPS
14.5ms Frame Time
22ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 25,292
Graphics Card
Required 28,463
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 28 41 46
1440p QHD 34 50 71 79
1080p Full HD 47 69 107 121

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 69
1920x1080 Low 121
1920x1080 Medium 107
1920x1080 Ultra 47
2560x1440 High 50
2560x1440 Low 79
2560x1440 Medium 71
2560x1440 Ultra 34
3840x2160 High 28
3840x2160 Low 46
3840x2160 Medium 41
3840x2160 Ultra 22

Performance Analysis: Archeage on Your System

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 2060 delivers a mixed set of results in Archeage, depending heavily on the target resolution and quality preset. A 10-core, 16-thread Raptor Lake processor combined with a Turing-based GPU with 6 GB of GDDR6 memory and a 192-bit bus is not a uniform performer across the board. Benchmark data shows clear thresholds: at 1080p the combo is broadly capable, at 1440p it becomes selective, and at 4K it falls short of the 60 FPS playable threshold on every tested setting. This analysis breaks down the exact measured frame rates, identifies the optimal settings per resolution, and compares the combo against other tested configurations in the database.

Measured FPS Breakdown

The recorded measurements cover three resolutions (1920x1080, 2560x1440, 3840x2160) and four quality presets (Low, Medium, High, Ultra). All values are average FPS; minimum and maximum frame rates were not recorded for any configuration.

At 1920x1080, the results show a wide spread. The Low preset averages 121 FPS, which is the highest recorded value for this combo in any configuration. Medium drops to 107.1 FPS, still comfortably above the 60 FPS playable threshold. High averages 68.8 FPS, which clears the threshold but with less headroom. The Ultra preset averages 46.7 FPS, below the playable threshold and 21.3 FPS lower than the High preset. The scaling from Low to Ultra is not linear: Low to Medium loses 13.9 FPS, Medium to High loses 38.3 FPS, and High to Ultra loses 22.1 FPS. The steepest drop occurs between Medium and High, suggesting a significant increase in rendering workload at that preset step.

At 2560x1440, the averages are lower across the board. Low preset averages 78.8 FPS, which remains above the 60 FPS threshold. Medium averages 71.3 FPS, still playable. High drops to 50.1 FPS, below the threshold. Ultra averages 33.5 FPS, the lowest value at this resolution. The gap between Low and Medium is 7.5 FPS, while the gap between Medium and High is 21.2 FPS, and the gap between High and Ultra is 16.6 FPS. The pattern mirrors 1080p: the largest single drop occurs when moving from Medium to High.

At 3840x2160, no preset reaches the playable threshold. Low averages 45.8 FPS, Medium averages 41.3 FPS, High averages 28.3 FPS, and Ultra averages 21.9 FPS. The differences between presets are smaller in absolute terms than at lower resolutions: Low to Medium loses 4.5 FPS, Medium to High loses 13 FPS, and High to Ultra loses 6.4 FPS. The overall range from Low to Ultra is 23.9 FPS, compared to a 74.3 FPS range at 1080p and a 45.3 FPS range at 1440p. This compression indicates that at 4K the GPU is the limiting factor regardless of preset, since even the Low preset cannot come close to the 60 FPS target.

Comparing across resolutions for the same preset shows the resolution impact. For Low: 121 FPS at 1080p, 78.8 FPS at 1440p, 45.8 FPS at 4K. For Medium: 107.1 FPS at 1080p, 71.3 FPS at 1440p, 41.3 FPS at 4K. For High: 68.8 FPS at 1080p, 50.1 FPS at 1440p, 28.3 FPS at 4K. For Ultra: 46.7 FPS at 1080p, 33.5 FPS at 1440p, 21.9 FPS at 4K. The transition from 1080p to 1440p reduces FPS by roughly 35-42% depending on preset, while the transition from 1440p to 4K reduces FPS by roughly 35-44%. This consistent scaling suggests a GPU-bound scenario at higher resolutions, with the CPU providing sufficient headroom at 1080p.

Best Settings per Resolution

The database defines the playable threshold at 60 FPS. For each resolution, the best settings are the most demanding preset that still maintains an average at or above that threshold.

At 1920x1080, the High preset is the best playable option, averaging 68.8 FPS. This is the highest quality preset that clears the threshold. The Low preset averages 121 FPS and Medium averages 107.1 FPS, both playable, but High offers better visual quality with 8.8 FPS of headroom above the threshold. The Ultra preset averages 46.7 FPS, which fails to reach 60 FPS.

At 2560x1440, the Medium preset is the best playable option, averaging 71.3 FPS. Low averages 78.8 FPS and is also playable, but Medium provides a higher quality level with 11.3 FPS of headroom. The High preset averages 50.1 FPS, below the threshold, and Ultra averages 33.5 FPS, also below.

At 3840x2160, the verdict indicates no playable settings exist. The highest average across any preset is 45.8 FPS on Low, which is 14.2 FPS below the threshold. Therefore, the best settings field is null for this resolution, meaning no preset can sustain 60 FPS or higher.

For users prioritizing a smooth experience, the data suggests 1080p High as the optimal balance of quality and performance, with 1440p Medium as the alternative for higher resolution but slightly lower visual fidelity. At 4K, the only option to reach 60 FPS would require lowering resolution or accepting a frame rate below the playable threshold, since even Low fails.

FAQ

Q: Can this combo run Archeage at 1920x1080 with Ultra settings?

A: No. The Ultra preset averages 46.7 FPS at 1080p, which is below the 60 FPS playable threshold. The best playable preset at this resolution is High, averaging 68.8 FPS.

Q: What is the highest quality preset that stays above 60 FPS at 2560x1440?

A: Medium is the most demanding preset that clears the threshold, averaging 71.3 FPS. Low also averages 78.8 FPS, but Medium offers higher quality. High and Ultra both fall below 60 FPS.

Q: Is there any way to play at 3840x2160 at 60 FPS with this hardware?

A: No. The recorded data shows no playable settings at 4K. The best average is 45.8 FPS on Low, which is below the 60 FPS threshold. Medium averages 41.3 FPS, High averages 28.3 FPS, and Ultra averages 21.9 FPS.

Q: How much FPS is lost when moving from 1080p to 1440p on the High preset?

A: The High preset averages 68.8 FPS at 1080p and 50.1 FPS at 1440p, a drop of 18.7 FPS. This takes the frame rate from above the threshold to below it.

Q: Which preset shows the largest FPS drop between consecutive settings at 1080p?

A: The transition from Medium to High shows the largest drop, going from 107.1 FPS to 68.8 FPS, a loss of 38.3 FPS. The Low to Medium drop is 13.9 FPS, and High to Ultra drops 22.1 FPS.

Q: Does the combo perform better at 1440p Low or 1080p High?

A: 1440p Low averages 78.8 FPS, while 1080p High averages 68.8 FPS. The 1440p Low configuration produces a higher frame rate, but 1080p High offers better visual quality. Both are above the 60 FPS threshold.

How This Combo Ranks

The database ranks this specific CPU and GPU combination for Archeage at position 2856 out of 3708 tested combos. This places it in the lower portion of the ranking, roughly at the 23rd percentile of tested configurations (the rank divided by the total number of combos). The CPU alone sits at the 77th percentile compared to all CPUs, while the GPU sits at the 58th percentile compared to all GPUs. The combination rank is much lower than either individual percentile, indicating that for this specific game, the combined performance is not as strong as the individual components might suggest.

The gap between the CPU's high percentile and the combo's low rank points to the GPU being the primary constraint in Archeage. With a 6 GB memory buffer and a 192-bit bus, the RTX 2060 cannot maintain high frame rates at demanding settings, particularly at higher resolutions. The CPU's 10 cores and 16 threads provide ample processing power, but the game's rendering workload saturates the GPU before the CPU becomes a bottleneck.

Within the ranking, this combo falls behind a significant number of alternatives, but it also outperforms a substantial portion of the 3708 tested configurations. The 2856 rank means that 852 combos perform worse, and 2855 perform better. This positions the combo as a mid-to-low tier option for Archeage specifically, despite the CPU's strong benchmark scores in other applications.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-13400F are AMD Ryzen 9 6900HS, Intel Core 5 120, AMD Ryzen 5 5600X3D, and AMD Ryzen 7 6800H. Their average benchmark scores are all within 0.4% of the i5-13400F's average score. The AMD Ryzen 9 6900HS matches at 0% delta, Intel Core 5 120 is 0.3% higher, AMD Ryzen 5 5600X3D is 0.3% higher, and AMD Ryzen 7 6800H is 0.4% lower. These CPUs would likely produce very similar frame rates in Archeage when paired with the same GPU, since their single-thread and multi-thread performance is effectively identical in aggregate.

For the NVIDIA GeForce RTX 2060, the nearest rivals are NVIDIA GeForce GTX 580, AMD Radeon 680M, NVIDIA GeForce RTX 3050 OEM, and AMD Radeon RX 7600. The GTX 580 matches at 0% delta, the Radeon 680M is 0.1% higher, the RTX 3050 OEM is 0.6% higher, and the RX 7600 is 0.8% higher. These GPUs would deliver nearly identical average frame rates in Archeage. The RTX 3050 OEM and RX 7600 offer slightly better performance, which could translate to a few extra FPS at the same settings, but the difference is under 1% in the GPU benchmark average.

Swapping the i5-13400F for any of the rival CPUs while keeping the RTX 2060 would yield similar results, since the CPU is not the limiting factor in most tested configurations. Swapping the RTX 2060 for a rival GPU would also produce comparable outcomes, with the RTX 3050 OEM or RX 7600 potentially nudging frame rates up by a small margin. Users considering a comparable build can expect similar performance from any of these component combinations.

The Verdict

The verdict by resolution is clear. At 1920x1080, the combo can run Archeage at 60 FPS or higher on the High, Medium, and Low presets. The best playable setting is High with an average of 68.8 FPS. The Ultra preset fails at 46.7 FPS.

At 2560x1440, the combo can run the game at 60 FPS or higher on Medium and Low. The best playable setting is Medium with an average of 71.3 FPS. High and Ultra both fail, with averages of 50.1 FPS and 33.5 FPS respectively.

At 3840x2160, the combo cannot run the game at 60 FPS on any preset. The highest average is 45.8 FPS on Low, which is below the threshold. No playable settings exist at 4K.

For a user targeting 60 FPS, the practical ceiling is 1440p Medium or 1080p High. At 1080p, the system has headroom on Low and Medium (121 FPS and 107.1 FPS respectively), allowing for higher refresh rate monitors up to 120 Hz on Low. At 1440p, Medium is the maximum quality preset that sustains playable frame rates. The system is not suitable for 4K gaming in Archeage, as even the lowest settings fail to reach 60 FPS.

CPU and GPU Roles

The recorded data shows a clear division of labor between the CPU and GPU depending on resolution. At 1920x1080, the CPU's performance is more influential, as the frame rates on Low and Medium (121 FPS and 107.1 FPS) are high enough that the GPU can render frames quickly. The i5-13400F's strong single-thread score (960 in 3dmark single thread, 3634 in Passmark single thread) allows the game logic and draw calls to be processed without holding back the GPU. The drop from Medium to High (38.3 FPS) indicates the point where the GPU's shading units, 1920 in total, start to become the bottleneck as the preset increases rendering complexity.

At 2560x1440, the GPU plays a larger role. The frame rates drop across all presets compared to 1080p, and the gap between Low and Medium narrows to 7.5 FPS. The GPU's 6 GB memory and 336.0 GB/s bandwidth are sufficient for Low and Medium, but High (50.1 FPS) and Ultra (33.5 FPS) show that the additional pixel shading load at 1440p overwhelms the GPU's capabilities. The CPU still provides enough throughput, as evidenced by the 78.8 FPS on Low, but the GPU becomes the limiting factor as quality rises.

At 3840x2160, the GPU is almost entirely the bottleneck. The FPS range across all presets is only 23.9 FPS (from 21.9 on Ultra to 45.8 on Low), and even Low cannot reach the threshold. The pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s are insufficient for 4K rendering in this game. The CPU's role diminishes further, as no preset allows the CPU to stretch its legs; the GPU is always the constraint.

The scaling between resolutions confirms this. From 1080p to 1440p, the FPS drops by roughly 35-42% across presets, which aligns with the increase in pixel count (from 2.07 million to 3.69 million, a 78% increase, but the game's workload does not scale linearly). From 1440p to 4K (8.29 million pixels), the FPS drops by another 35-44%. The consistent percentage drops indicate a GPU-bound scenario, since a CPU-bound scenario would show smaller drops at higher resolutions. The CPU's benchmark scores (22604 in Cinebench R23 multicore, 3191 in single core) are more than adequate for this game, but the GPU's 192-bit memory bus and 6 GB capacity create a hard ceiling at 1440p Medium and 1080p High.

In summary, the i5-13400F provides ample processing power for Archeage at all resolutions, but the RTX 2060 limits the playable settings to 1080p High and 1440p Medium. Users who want higher quality or higher resolutions would need a more capable GPU, while the CPU would not need an upgrade for this title.