Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 56 | 79 | 89 |
| 1440p QHD | 62 | 95 | 136 | 152 |
| 1080p Full HD | 92 | 141 | 203 | 227 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5070 is a high-performance combo that delivers a smooth 60+ FPS experience in Archeage at 1080p and 1440p, but it falls short of the 60 FPS threshold at 4K on the highest settings. Benchmark data shows this pairing is best suited for 1440p Ultra or 1080p Ultra gaming, while 4K users will need to dial back to Medium settings to maintain playable frame rates.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 92.4 FPS. This is well above the playable threshold of 60 FPS, indicating the combo has significant headroom at this resolution. The data shows that even the most graphically intensive settings are comfortably playable, making 1080p the resolution where users can fully max out the game without concerns.
For 2560x1440, the best settings that remain at or above 60 FPS are Ultra, with an average of 62.4 FPS. This is a close call—the combo just barely clears the 60 FPS threshold, leaving only a narrow 2.4 FPS margin. While technically playable, this suggests that 1440p Ultra is the edge of the combo's capability. Users who prioritize stability over maximum visual fidelity might prefer High settings, which deliver 95.2 FPS on average, providing a much larger buffer above the threshold.
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which produces an average of 78.5 FPS. The data clearly shows that Ultra settings at 4K are not viable, dropping to just 38 FPS on average, which is far below the playable threshold. High settings at 4K are also borderline, averaging 56.1 FPS, just short of 60 FPS. Therefore, Medium is the recommended choice for 4K gaming with this combo.
FAQ
Q: Can this PC run Archeage at 4K resolution?
A: Yes, but only up to Medium settings. The measured data shows Medium settings at 3840x2160 average 78.5 FPS, which clears the 60 FPS threshold. High settings average 56.1 FPS and Ultra averages 38 FPS, both below the playable threshold.
Q: What is the best resolution for this combo?
A: The data indicates 1920x1080 is the best resolution, as it allows for Ultra settings with an average of 92.4 FPS. This provides the highest visual quality while maintaining a comfortable margin above the 60 FPS threshold.
Q: Is 1440p Ultra playable with the Intel Core i5-12400F and RTX 5070?
A: Yes, it is technically playable. The average FPS at 2560x1440 Ultra is 62.4 FPS, which is above the 60 FPS threshold, though the margin is slim. For a more stable experience, High settings at 95.2 FPS are recommended.
Q: How does the RTX 5070 compare to its nearest rivals in benchmark scores?
A: The RTX 5070's average benchmark score is 40377. Its nearest rival, the AMD Radeon Pro 580, scores 40318, which is a 0.1 percent difference. The gap is minimal, indicating these GPUs perform nearly identically in synthetic benchmarks.
Q: Does the CPU bottleneck the GPU in this game?
A: The data does not show a bottleneck. The combo ranks 651 out of 3708 tested combos for this game, placing it in the top 17.6 percent of all tested pairings. The Core i5-12400F has a single-thread benchmark score of 3481 on Passmark, which is strong for an MMORPG, and the combo's performance at lower resolutions (1080p Low averaging 227.3 FPS) suggests the CPU keeps up well.
Q: What are the best settings for a stable 60 FPS experience at 4K?
A: Medium settings at 3840x2160 are the best choice, averaging 78.5 FPS. This provides the highest visual quality that still maintains a comfortable buffer above the 60 FPS threshold, unlike High (56.1 FPS) or Ultra (38 FPS), which fall below.
Measured FPS Breakdown
At 1920x1080, the combo demonstrates its peak performance. Low settings produce an average of 227.3 FPS, while Medium settings reach 203.4 FPS. High settings drop to 140.5 FPS, and Ultra settings average 92.4 FPS. All settings at this resolution are far above the 60 FPS threshold, with even the most demanding preset offering over 30 FPS of headroom.
The 2560x1440 results show a noticeable step down. Low settings average 151.6 FPS, and Medium settings hit 136.3 FPS. High settings are still very strong at 95.2 FPS, while Ultra drops to 62.4 FPS. This is the first resolution where the Ultra preset comes close to the playable threshold, indicating the combo's limits begin to show here.
At 3840x2160, the performance gap becomes significant. Low settings average 89 FPS, and Medium settings reach 78.5 FPS. High settings fall to 56.1 FPS, just below the 60 FPS threshold, and Ultra settings plummet to 38 FPS. The data shows a clear pattern: 4K gaming requires a significant reduction in settings to maintain playability, with only Low and Medium presets clearing the threshold.
The progression across resolutions shows a consistent scaling pattern. From 1080p to 1440p, the average FPS drops by roughly 30-40 percent depending on settings. From 1440p to 4K, the drop is even more pronounced, with Ultra settings falling by nearly 40 percent from 62.4 FPS to 38 FPS. This scaling is typical for a GPU with 12 GB of GDDR7 memory and a 192-bit memory bus, which provides 672.0 GB/s of bandwidth.
How This Combo Ranks
The Intel Core i5-12400F and NVIDIA GeForce RTX 5070 combination ranks 651 out of 3708 tested combos for Archeage. This places it in the top 17.6 percent of all tested hardware pairings, indicating it is a strong performer for this game. The ranking is based on measured FPS data across all resolutions and settings, and the combo's ability to hit 60+ FPS at 1440p Ultra and 1080p Ultra contributes significantly to its position.
The CPU's individual performance supports this ranking. The Core i5-12400F has a Passmark multithread score of 19433 and a single-thread score of 3481, with a percentile rank of 73 among all CPUs. Its Cinebench R23 multicore score of 12380 and single-core score of 1680 show capable processing power for an MMORPG, which typically relies more on single-core performance. The GPU's percentile rank of 82 among all GPUs, with a Passmark G3D score of 29137, confirms it is a high-end part that drives the overall combo ranking.
The combo's ranking is particularly impressive given that Archeage is an older MMORPG from 2014, and the data suggests the game is not heavily optimized for modern multi-core CPUs. The fact that this combo still ranks in the top 18 percent of all tested pairings indicates that both the CPU and GPU are more than capable for this title, and the bottleneck likely lies in the game's engine rather than the hardware.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 5 7535HS has an average benchmark score of 19047, which is essentially identical to the Core i5-12400F's score of 19039, with a delta of 0 percent. The Intel Core 3 201E scores 19056, just 0.1 percent higher, while the Intel Core i5-1335U scores 18982, 0.3 percent lower. The AMD EPYC 7773X also scores 18979, 0.3 percent lower. These alternatives would behave nearly identically to the i5-12400F in Archeage, as their benchmark scores are within a fraction of a percent.
For the GPU, the AMD Radeon Pro 580 has an average score of 40318, which is 0.1 percent lower than the RTX 5070's 40377. The AMD Radeon Pro WX 7100 scores 40063, 0.8 percent lower, and the AMD Radeon Pro 5300 scores 40870, 1.2 percent higher. The NVIDIA RTX A500 Mobile scores 39568, 2 percent lower. These GPUs would produce very similar frame rates in Archeage, with differences of only a few FPS at most.
Users who cannot find an RTX 5070 could substitute one of these GPUs and expect nearly identical performance. The Radeon Pro 580, in particular, is a near-perfect match with a delta of just 0.1 percent, meaning the measured FPS values would be almost indistinguishable. Similarly, swapping the i5-12400F for a Ryzen 5 7535HS would yield no measurable difference in game performance, as their benchmark scores are effectively equal.
The Verdict
The data clearly shows that this PC can run Archeage at 1080p and 1440p with all settings options available. At 1920x1080, the verdict is that Ultra settings are playable with an average of 92.4 FPS, giving users the highest visual quality with significant headroom above the 60 FPS threshold. At 2560x1440, Ultra settings are also playable, but barely, with an average of 62.4 FPS; this is the most demanding configuration that clears the threshold.
At 3840x2160, the verdict is more nuanced. The playable settings are Low and Medium, with Medium being the best option at 78.5 FPS. High settings at 4K fail to reach 60 FPS, averaging 56.1 FPS, and Ultra settings are not viable at just 38 FPS. For 4K users, sticking to Medium is the clear recommendation, as it provides a playable experience without sacrificing too much visual quality.
Overall, the Intel Core i5-12400F and RTX 5070 combo is an excellent choice for Archeage at mainstream resolutions. It excels at 1080p and handles 1440p well, but 4K gamers will need to compromise on settings. The verdict is straightforward: this PC runs Archeage exceptionally well at 1080p and 1440p, and adequately at 4K with reduced settings.