Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 32 | 47 | 52 |
| 1440p QHD | 38 | 55 | 81 | 91 |
| 1080p Full HD | 56 | 82 | 121 | 136 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5050 delivers playable performance in Archeage, but only at specific resolution and settings combinations. At 1920x1080, the combo clears the 60 FPS threshold at High, Low, and Medium settings, with the best playable result being High at 82 FPS average. At 2560x1440, only Low and Medium presets remain playable, with Medium topping out at 81 FPS average. At 3840x2160, no settings achieve the 60 FPS playability threshold, with the best result being Low at 52 FPS average. The data indicates this hardware is a solid 1080p and capable 1440p solution for Archeage, but not a 4K performer.
Measured FPS Breakdown
The measured FPS data for this combo in Archeage shows a clear performance hierarchy across resolutions and presets. At 1920x1080, the Low preset delivers 136 FPS average, which is the highest recorded figure for this configuration. Medium follows at 121 FPS average, with a minimum of 103 FPS and a maximum of 139 FPS. High settings produce 82 FPS average, still comfortably above the 60 FPS threshold. Ultra is the only 1080p preset that falls below playability, at 56 FPS average.
Moving to 2560x1440, the performance drops predictably but remains strong for lower presets. Low settings yield 91 FPS average, while Medium delivers 81 FPS average with a minimum of 69 FPS and a maximum of 93 FPS. High settings produce 55 FPS average, just under the 60 FPS playability threshold. Ultra at 1440p falls to 38 FPS average, which is noticeably below playable levels.
At 3840x2160, the RTX 5050 struggles to maintain playable frame rates regardless of settings. Low settings produce 52 FPS average, Medium delivers 47 FPS average with a minimum of 40 FPS and a maximum of 53 FPS, High drops to 32 FPS average, and Ultra bottoms out at 22 FPS average. The gap between Low and Ultra at 4K is 30 FPS, showing that the GPU is the limiting factor at this resolution.
The scaling pattern across resolutions reveals that the CPU and GPU combination loses roughly 30-40% performance when moving from 1080p to 1440p, and another 40-50% when moving from 1440p to 4K, depending on the preset. The min/max data available for Medium settings shows consistent frame pacing at 1080p (103-139 FPS) and 1440p (69-93 FPS), but tighter variance at 4K (40-53 FPS), suggesting the system is more constrained at higher resolutions.
CPU and GPU Roles
The benchmark data indicates that the GPU becomes the dominant bottleneck at higher resolutions, while the CPU handles the lower-resolution workload more easily. At 1920x1080, the difference between Low (136 FPS) and Ultra (56 FPS) is 80 FPS, showing that settings have a massive impact on frame rate. This wide spread suggests the GPU is doing most of the work at 1080p, with the i5-12400F providing sufficient headroom to feed the RTX 5050.
At 2560x1440, the spread between Low (91 FPS) and Ultra (38 FPS) narrows to 53 FPS. This reduction in spread relative to 1080p indicates that the GPU is becoming more of a limiting factor, as the absolute frame rates drop across all presets. The Medium preset at 1440p (81 FPS) is nearly identical to the High preset at 1080p (82 FPS), which shows that resolution scaling is roughly equivalent to one preset step at this performance level.
At 3840x2160, the spread between Low (52 FPS) and Ultra (22 FPS) is only 30 FPS, the smallest of all resolutions. This compressed range strongly indicates that the GPU is the primary constraint at 4K, as even lowering settings to Low cannot recover enough performance to reach playable levels. The CPU's role diminishes at 4K, as the i5-12400F's 6 cores and 12 threads are sufficient to keep up with the GPU's reduced output.
The scaling between presets at each resolution tells a similar story. At 1080p, each preset step (Low to Medium to High to Ultra) costs roughly 15-45 FPS, with the largest drop occurring between High (82 FPS) and Ultra (56 FPS). At 1440p, the drops are more uniform at 10-17 FPS per step. At 4K, the drops range from 5-15 FPS per step, confirming that the GPU is the limiting factor and that the CPU has ample headroom even at lower settings.
How This Combo Ranks
This specific combination of the Intel Core i5-12400F and NVIDIA GeForce RTX 5050 ranks 2279 out of 3708 tested combos in Archeage. That places it in the 38th percentile of all tested configurations, meaning roughly 62% of tested hardware combinations deliver better performance in this game. This rank reflects the mid-range positioning of both components, with the CPU scoring in the 73rd percentile among all CPUs and the GPU in the 66th percentile among all GPUs.
The combo's rank is more heavily influenced by the GPU than the CPU, given the game's scaling behavior. The i5-12400F's average benchmark score is 19039, which is competitive with its nearest rivals. The RTX 5050's average benchmark score is 21035, which also sits in a similar mid-range tier. The combination of a mid-pack CPU and mid-pack GPU results in a below-median ranking for Archeage specifically, likely because the game's engine favors configurations with stronger GPUs at higher resolutions.
The measured FPS data supports this ranking interpretation. At 1080p, the combo performs well above the playability threshold for most presets, which is consistent with a mid-range GPU handling a 2014-era MMORPG at mainstream resolutions. However, the inability to maintain 60 FPS at 4K on any preset shows the hardware's limitations for high-resolution gaming. The rank of 2279 out of 3708 suggests that while this combo is not a top-tier performer, it is also not at the very bottom of the tested pool, and it handles the most common gaming resolution (1080p) well.
Similar Performance Alternatives
The nearest rivals for the Intel Core i5-12400F indicate that several other CPUs would deliver nearly identical CPU-bound performance in Archeage. The AMD Ryzen 5 7535HS has an average score of 19047, a 0% delta from the i5-12400F's 19039 average. The Intel Core 3 201E scores 19056, which is -0.1% relative. The Intel Core i5-1335U scores 18982, a 0.3% delta. The AMD EPYC 7773X scores 18979, also a 0.3% delta. Any of these CPUs paired with the same RTX 5050 would produce essentially identical frame rates in Archeage, particularly at 1080p where the CPU has more influence.
For the GPU side, the nearest rivals to the RTX 5050 include the AMD Radeon RX Vega M GL with an average score of 21153, a -0.6% delta from the RTX 5050's 21035. The AMD Radeon HD 8970M scores 21237, a -1% delta. The AMD Radeon RX 5600 XT scores 20713, a 1.6% delta in favor of the RTX 5050. The NVIDIA RTX A4000 Mobile scores 21379, a -1.6% delta. Substituting any of these GPUs for the RTX 5050 while keeping the i5-12400F would result in very similar Archeage performance, with the RX 5600 XT being slightly slower and the A4000 Mobile slightly faster.
Combining these CPU and GPU alternatives, a system with a Ryzen 5 7535HS and an RX 5600 XT would likely land within a few FPS of the i5-12400F + RTX 5050 combo. The delta percentages are all within 2%, so the measured FPS differences would be minimal. For buyers looking at similar performance, any of these CPU or GPU pairings would behave comparably in Archeage, with the same resolution and settings limitations.
FAQ
Q: Can this PC run Archeage at 1920x1080 with High settings?
A: Yes. The measured average FPS at 1080p High settings is 82 FPS, which is well above the 60 FPS playability threshold. High is actually the best playable preset at 1080p, as Ultra only achieves 56 FPS average.
Q: What is the best playable settings preset at 2560x1440?
A: Medium is the best playable preset at 1440p, delivering 81 FPS average with a minimum of 69 FPS and a maximum of 93 FPS. Low is also playable at 91 FPS average, but High falls below the threshold at 55 FPS.
Q: Is 4K gaming possible with this combo in Archeage?
A: No. At 3840x2160, all settings presets fail to reach 60 FPS. Low produces 52 FPS average, Medium 47 FPS, High 32 FPS, and Ultra 22 FPS. The verdict data lists no playable settings at 4K.
Q: How does the RTX 5050 compare to an AMD Radeon RX 5600 XT for this game?
A: The RTX 5050 has an average benchmark score of 21035, which is 1.6% higher than the RX 5600 XT's 20713. In Archeage, this would translate to roughly 1-2 FPS difference at most settings, making them essentially interchangeable in performance.
Q: What CPU would perform similarly to the i5-12400F in this build?
A: The AMD Ryzen 5 7535HS has a 0% delta from the i5-12400F in average benchmark scores. Other near-identical performers include the Intel Core 3 201E (-0.1%), Intel Core i5-1335U (0.3%), and AMD EPYC 7773X (0.3%). Any of these would yield nearly the same Archeage frame rates.
Q: Does this combo meet the 60 FPS threshold at 1440p on High settings?
A: No. At 1440p High, the measured average FPS is 55, which is 5 FPS below the 60 FPS playability threshold. You would need to drop to Medium settings to achieve playable frame rates at this resolution.
The Verdict
The Intel Core i5-12400F + NVIDIA GeForce RTX 5050 can run Archeage, but the experience depends heavily on resolution and settings. At 1920x1080, the system delivers playable performance on High, Low, and Medium presets, with High being the best playable option at 82 FPS average. This is the sweet spot for this hardware, offering a strong balance of visual quality and frame rate.
At 2560x1440, the combo remains viable but requires settings compromises. Low and Medium are playable, with Medium providing the best experience at 81 FPS average. High settings fall just short of the 60 FPS threshold at 55 FPS average, making Medium the recommended choice for 1440p gaming.
At 3840x2160, the system cannot achieve playable performance on any preset. The best result is Low at 52 FPS average, which is 8 FPS below the threshold. The verdict data explicitly lists no playable settings at 4K, confirming that this resolution is out of reach for this hardware in Archeage.
For users targeting 1080p or 1440p gaming, this combo is a reliable choice that exceeds the 60 FPS playability threshold on appropriate settings. The i5-12400F provides sufficient CPU performance to avoid bottlenecking the RTX 5050 at these resolutions, and the GPU delivers consistent frame rates. For 4K gaming, however, this hardware falls short, and users would need to either lower resolution or upgrade components to achieve playable performance in Archeage.