Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 37 | 55 | 60 |
| 1440p QHD | 47 | 66 | 99 | 110 |
| 1080p Full HD | 64 | 100 | 143 | 162 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-12400 paired with the NVIDIA GeForce RTX 5060 is a mid-range combination that handles Archeage with clear resolution-dependent limits. This combo ranks at position 1807 out of 3708 tested combinations, placing it in the 49th percentile of tested systems. The data shows a system that can comfortably exceed the 60 FPS threshold at 1080p across all settings, remains playable at 1440p with most presets, but struggles at 4K where only the lowest settings achieve playability. The benchmark results indicate a balanced pairing where the CPU's strong single-thread performance supports high frame rates at lower resolutions, while the GPU's 8 GB of GDDR7 memory and 448.0 GB/s bandwidth become the limiting factor at higher pixel counts.
How This Combo Ranks
The combination of the Intel Core i5-12400 and NVIDIA GeForce RTX 5060 achieves a rank of 1807 out of 3708 tested combos for Archeage. This places the system in the middle of the pack, meaning roughly half of all tested configurations deliver better performance in this MMORPG. The CPU sits at the 72nd percentile among all processors tested, with an average benchmark score of 18683, while the GPU also reaches the 72nd percentile among all graphics cards, with an average benchmark score of 26331. These percentile values indicate that both components are solidly mid-range offerings relative to their respective product stacks.
The measured frame rates show a system that scales predictably with resolution. At 1920x1080, the combo delivers between 63.8 FPS on Ultra settings and 161.8 FPS on Low settings, demonstrating significant headroom for high-refresh-rate gaming at standard HD. Moving to 2560x1440, the range narrows to between 46.9 FPS on Ultra and 109.7 FPS on Low, revealing that the Ultra preset begins to strain the hardware at this resolution. At 3840x2160, performance drops sharply, with only the Low preset managing 60.2 FPS while Ultra falls to 24.4 FPS. This progression shows a system that is well-suited for 1080p gaming, capable at 1440p with settings adjustments, and only marginally playable at 4K.
Similar Performance Alternatives
The nearest rivals for the Intel Core i5-12400 show that this CPU's performance is closely matched by several other processors. The AMD EPYC 7643 scores 18697, which is just 0.1% higher than the i5-12400's average score of 18683. The Intel Core i7-1355U scores 18730, a 0.3% advantage, while the AMD Ryzen AI 5 330 scores 18811, representing a 0.7% lead. On the lower side, the Intel Core i3-14100F scores 18519, which is 0.9% behind the i5-12400. These tight margins indicate that swapping to any of these CPUs would produce nearly identical performance in Archeage, as the game's frame rates are unlikely to shift by more than a few percent.
For the GPU, the NVIDIA GeForce RTX 5060's nearest rivals include the AMD Radeon 860M with a score of 26401 (0.3% higher), the NVIDIA GeForce MX550 with a score of 26421 (0.3% higher), and the AMD Radeon RX 5700 XT 50th Anniversary with a score of 26553 (0.8% higher). The AMD Radeon RX 6750 XT scores 26011, which is 1.2% lower. These deltaPct values are all within a narrow band, meaning any of these graphics cards would deliver nearly identical frame rates in Archeage. A user considering this system could expect similar performance from any of these alternatives without significant changes to the gaming experience.
CPU and GPU Roles
The benchmark data reveals how the CPU and GPU divide responsibilities across resolutions in Archeage. At 1920x1080, the system achieves 161.8 FPS on Low settings and 143.1 FPS on Medium, suggesting that the CPU is capable of feeding the GPU with enough data to maintain high frame rates. The drop from Low to Medium is 18.7 FPS, while moving from Medium to High reduces performance by 43.0 FPS to 100.1 FPS. This large drop indicates that the GPU becomes the bottleneck as settings increase, since the CPU's performance remains constant while the GPU must render more complex scenes.
At 2560x1440, the scaling shows a similar pattern but with lower absolute values. Low settings produce 109.7 FPS, Medium delivers 98.8 FPS, and High drops to 66.1 FPS. The difference between Low and Medium is only 10.9 FPS, while the jump from Medium to High costs 32.7 FPS. This pattern suggests the GPU is increasingly responsible for performance at higher resolutions, as the additional pixel count demands more from the graphics card while the CPU workload remains relatively unchanged.
At 3840x2160, the roles shift dramatically. Low settings yield 60.2 FPS, Medium drops to 54.9 FPS, and High falls to 36.6 FPS. The Ultra preset manages only 24.4 FPS. The relatively small gap between Low and Medium (5.3 FPS) compared to the larger gap between Medium and High (18.3 FPS) indicates that the GPU is now the dominant factor. The CPU's single-thread performance, which scores 2257 in Cinebench R23 single-core, is sufficient to drive frame rates at lower resolutions, but the GPU's 8 GB memory capacity and 128-bit bus width limit its ability to handle the massive pixel throughput required at 4K.
The Verdict
This system can run Archeage, but the playable resolutions depend heavily on the selected settings. At 1920x1080, all four presets clear the 60 FPS threshold, with Ultra achieving 63.8 FPS, High reaching 100.1 FPS, Medium hitting 143.1 FPS, and Low reaching 161.8 FPS. This makes 1080p the fully playable resolution for this combo, with even the most demanding preset maintaining acceptable frame rates.
At 2560x1440, the system remains playable on High, Medium, and Low settings. High delivers 66.1 FPS, Medium produces 98.8 FPS, and Low reaches 109.7 FPS. However, the Ultra preset falls below the threshold at 46.9 FPS, making it unsuitable for smooth gameplay at this resolution. At 3840x2160, only the Low preset clears 60 FPS with 60.2 FPS, while Medium (54.9 FPS), High (36.6 FPS), and Ultra (24.4 FPS) all fall short. The verdict is clear: this system is best used at 1080p, acceptable at 1440p with settings compromises, and only marginally playable at 4K on the lowest settings.
Measured FPS Breakdown
The measured frame rates provide a detailed picture of performance across all resolution and settings combinations. At 3840x2160, the Low preset delivers an average of 60.2 FPS, which barely clears the 60 FPS playability threshold. The Medium preset drops to 54.9 FPS, followed by High at 36.6 FPS and Ultra at 24.4 FPS. This represents a steep decline from Low to Ultra, with the Ultra preset running at less than half the frame rate of Low.
At 2560x1440, the results show a wider range of playable options. Low settings achieve 109.7 FPS, providing substantial headroom above the threshold. Medium settings produce 98.8 FPS, still well above 60 FPS. High settings deliver 66.1 FPS, which clears the threshold by a comfortable margin. Ultra settings fall to 46.9 FPS, making this the only unplayable preset at this resolution.
At 1920x1080, the system demonstrates strong performance across all settings. Low settings reach 161.8 FPS, Medium achieves 143.1 FPS, High delivers 100.1 FPS, and Ultra maintains 63.8 FPS. The progression from Low to Ultra shows a consistent decline, but every preset remains above the 60 FPS threshold. The difference between Low and Ultra is 98.0 FPS, indicating that users can choose between maximum visual quality and maximum frame rates depending on their priorities.
Best Settings per Resolution
For each resolution, the most demanding preset that stays at or above 60 FPS represents the optimal balance between visual quality and performance. At 3840x2160, the Low preset is the only option that meets this criterion, achieving an average of 60.2 FPS. This is a marginal pass, with only 0.2 FPS of headroom above the threshold, so users should expect occasional dips below 60 FPS during intense scenes.
At 2560x1440, the High preset delivers 66.1 FPS, making it the best playable option. This provides 6.1 FPS of headroom above the threshold, offering a reasonable safety margin. Users who prefer higher visual fidelity would need to accept the 46.9 FPS of the Ultra preset, which falls short of smooth gameplay. At 1920x1080, the Ultra preset achieves 63.8 FPS, making it the best playable option. This provides 3.8 FPS of headroom, which is workable but not generous. Users seeking more stability could drop to High at 100.1 FPS, which offers significantly more margin.
FAQ
Q: Can this system run Archeage at 4K resolution?
A: Yes, but only on Low settings, which achieve 60.2 FPS. Medium settings drop to 54.9 FPS, High falls to 36.6 FPS, and Ultra manages only 24.4 FPS, all below the 60 FPS playability threshold.
Q: What is the highest playable setting at 1440p?
A: The High preset achieves 66.1 FPS, which is the most demanding setting that clears the 60 FPS threshold. The Ultra preset falls short at 46.9 FPS.
Q: Does the system support 1080p gaming at all quality levels?
A: Yes, all four presets at 1920x1080 exceed 60 FPS. Low reaches 161.8 FPS, Medium achieves 143.1 FPS, High delivers 100.1 FPS, and Ultra maintains 63.8 FPS.
Q: How does the CPU compare to its nearest rivals?
A: The Intel Core i5-12400 scores 18683 on average, which is within 1% of the AMD EPYC 7643 (18697), Intel Core i7-1355U (18730), AMD Ryzen AI 5 330 (18811), and Intel Core i3-14100F (18519).
Q: What GPU alternatives offer similar performance?
A: The AMD Radeon 860M scores 26401, the NVIDIA GeForce MX550 scores 26421, the AMD Radeon RX 5700 XT 50th Anniversary scores 26553, and the AMD Radeon RX 6750 XT scores 26011. All are within 1.2% of the RTX 5060's 26331 average score.
Q: Is the system better suited for high frame rates or high visual quality?
A: At 1080p, it can do both, with Low hitting 161.8 FPS and Ultra maintaining 63.8 FPS. At 1440p, users must choose between High at 66.1 FPS or Ultra at 46.9 FPS, favoring frame rate over quality. At 4K, only Low is playable at 60.2 FPS.