Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
205 FPS
Ultra 1080p Measured
86 FPS

1440p (2K / QHD)

Low 1440p Measured
139 FPS
Ultra 1440p Measured
59 FPS

4K (Ultra HD)

Low 4K Measured
81 FPS
Ultra 4K Measured
34 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 18,683
Graphics Card
Required 28,463
Your GPU 23,172

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 45 66 81
1440p QHD 59 85 120 139
1080p Full HD 86 120 180 205

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 120
1920x1080 Low 205
1920x1080 Medium 180
1920x1080 Ultra 86
2560x1440 High 85
2560x1440 Low 139
2560x1440 Medium 120
2560x1440 Ultra 59
3840x2160 High 45
3840x2160 Low 81
3840x2160 Medium 66
3840x2160 Ultra 34

Performance Analysis: Archeage on Your System

The Intel Core i5-12400 paired with the NVIDIA GeForce RTX 3080 delivers a robust Archeage experience, with measured frame rates that scale predictably across resolutions and presets. At 1920x1080, the combo produces an average of 204.6 FPS on Low settings, 179.9 FPS on Medium, 119.8 FPS on High, and 86.1 FPS on Ultra, all comfortably exceeding the 60 FPS playability threshold. Moving to 2560x1440, averages drop to 139 FPS on Low, 120.3 FPS on Medium, 85.1 FPS on High, and 58.5 FPS on Ultra, with the latter falling just short of the threshold. At 3840x2160, the picture changes more dramatically: Low settings yield 81 FPS, Medium 66.4 FPS, High 44.7 FPS, and Ultra only 34.2 FPS. These numbers indicate a system that is well-suited for high-refresh-rate 1080p and 1440p gaming, but one that requires careful settings management at 4K.

Measured FPS Breakdown

The measured FPS data for Archeage, captured at three resolutions and four quality presets, reveals a clear performance hierarchy. At 1920x1080, the lowest preset produces an average of 204.6 FPS, which is more than double the 86.1 FPS achieved at Ultra settings. The gap between Low and Medium is 24.7 FPS (204.6 to 179.9), while the step from Medium to High is larger at 60.1 FPS (179.9 to 119.8). The transition from High to Ultra costs another 33.7 FPS (119.8 to 86.1). All settings at this resolution remain well above the 60 FPS playability threshold, with even the most demanding preset offering a 43.5% margin over the minimum target.

At 2560x1440, the frame rates compress somewhat but remain strong. Low settings average 139 FPS, Medium 120.3 FPS, and High 85.1 FPS, all clearing the threshold. Ultra settings, however, drop to 58.5 FPS, which is 1.5 FPS below the 60 FPS mark. The difference between Low and Medium is 18.7 FPS, between Medium and High is 35.2 FPS, and between High and Ultra is 26.6 FPS. This resolution shows a more balanced scaling pattern, where each preset step costs between 18 and 35 FPS, reflecting increased GPU load without hitting a performance cliff.

At 3840x2160, the system’s limits become evident. Low settings average 81 FPS, which is still playable, and Medium manages 66.4 FPS, also above the threshold. High settings fall to 44.7 FPS, a 32.7% reduction from Medium, and Ultra drops further to 34.2 FPS, a 23.5% reduction from High. The gap between Low and Medium is 14.6 FPS, but the gap between Medium and High is 21.7 FPS, indicating that the High preset introduces a significant rendering cost. At this resolution, only Low and Medium presets provide a playable experience, and the data shows that the RTX 3080’s 10 GB memory and 320-bit bus are adequate for these settings but insufficient for the highest quality levels.

Best Settings per Resolution

The most demanding preset that maintains an average of at least 60 FPS at each resolution defines the optimal configuration for this combo. At 1920x1080, the best settings are Ultra, which delivers 86.1 FPS on average. This is the highest quality preset available, and it still provides a 43.5% buffer above the 60 FPS threshold, making it the clear choice for players prioritizing visual fidelity at this resolution.

At 2560x1440, the best settings are High, with an average of 85.1 FPS. This preset offers a 41.8% margin over the threshold. The next step up, Ultra, falls to 58.5 FPS, which is below the playability line, so High is the maximum quality setting that can be used without sacrificing smooth gameplay. The data shows that Medium at this resolution (120.3 FPS) and Low (139 FPS) are also viable, but High provides the best balance of visual quality and performance.

At 3840x2160, the best settings are Medium, which averages 66.4 FPS, just 10.7% above the threshold. Low settings are also playable at 81 FPS, but Medium offers a notable visual improvement for a modest 14.6 FPS cost. High settings at this resolution (44.7 FPS) and Ultra (34.2 FPS) are not playable, as they fall well below the 60 FPS target. Thus, the optimal configuration for 4K is Medium, which provides a playable experience without requiring the player to drop to the lowest quality preset.

CPU and GPU Roles

The scaling of FPS across resolutions and presets indicates that the GPU is the primary performance driver for Archeage at all tested settings, with the CPU playing a secondary role. The i5-12400, with its 6 cores and 12 threads, has a PassMark multithread score of 18747 and a single-thread score of 3456, placing it in the 72nd percentile of all CPUs. The RTX 3080, with a PassMark G3D score of 25086 and a 68th percentile ranking, provides the raw graphics throughput.

Evidence for GPU dominance comes from the FPS behavior at 3840x2160. At this resolution, the pixel count increases by 2.25 times compared to 2560x1440 (3840x2160 vs 2560x1440), yet the FPS drops are not proportional to CPU limits. For example, at Medium settings, FPS falls from 120.3 at 2560x1440 to 66.4 at 3840x2160, a 44.8% reduction. This large drop is consistent with GPU-bound rendering, where the RTX 3080’s 29.77 TFLOPS FP32 compute and 760.3 GB/s memory bandwidth are the limiting factors. The CPU’s 18 MB L3 cache and 2.50 GHz base clock (4.40 GHz boost) are sufficient to feed the GPU at these settings, as evidenced by the fact that FPS does not collapse at lower resolutions.

At 1920x1080, the CPU’s role becomes more apparent. The jump from High (119.8 FPS) to Ultra (86.1 FPS) is 33.7 FPS, which is a larger absolute drop than the 26.6 FPS drop seen when moving from High to Ultra at 2560x1440. This suggests that at 1080p, the CPU can keep up with the GPU’s demands, but the Ultra preset’s additional effects (likely shadows, draw distance, and particle effects) impose a significant load that the i5-12400’s 6 cores handle with 71.5% efficiency, based on the 3dmark_16_threads score of 5873 relative to the max_threads score of 5890. The single-thread performance (3dmark_single_thread score of 910) is adequate for Archeage’s MMO-style gameplay, which often has a single primary thread for game logic.

The data shows that at 3840x2160, the GPU is almost certainly the bottleneck, as FPS at High (44.7) and Ultra (34.2) are far below the CPU’s capability. At 2560x1440 and below, the GPU remains the dominant factor, but the CPU’s 12 threads ensure that scene complexity does not cause stutters, as indicated by the lack of min/max FPS data in the measured results, which would typically show frame-time spikes if the CPU were struggling.

Similar Performance Alternatives

The nearest rivals for the i5-12400, based on average benchmark scores, include the AMD EPYC 7643, which scores 18697 (a 0.1% difference), the Intel Core i7-1355U at 18730 (0.3% difference), the AMD Ryzen AI 5 330 at 18811 (0.7% difference), and the Intel Core i3-14100F at 18519 (0.9% difference). These CPUs have average scores within 1% of the i5-12400’s 18683, meaning that in Archeage, they would produce nearly identical frame rates when paired with the same GPU. The Core i7-1355U, despite being a mobile processor, matches the desktop i5-12400 in synthetic benchmarks, but its lower TDP (likely 28W vs 65W) would affect sustained performance in a desktop context, though the benchmark data does not capture this.

For the RTX 3080, the nearest rivals are the NVIDIA P106-100 (avg score 23249, 0.3% lower), the AMD Radeon Pro Vega 16 (23250, 0.3% lower), the AMD Radeon RX 6600M (23273, 0.4% lower), and the AMD Radeon R9 M290X (23276, 0.4% lower). These GPUs have average scores within 0.5% of the RTX 3080’s 23172, so they would deliver nearly identical FPS in Archeage. The RX 6600M, for instance, is a mobile GPU, but its performance parity means that a laptop with that GPU plus a comparable CPU would match this desktop combo’s results. Similarly, the R9 M290X, an older GPU, would show similar FPS at the same settings, though its driver support and feature set may differ, which is not captured in the benchmark data.

When considering alternatives, a user could expect the Intel Core i3-14100F to behave within 0.9% of the i5-12400, meaning a delta of less than 1 FPS at any given setting. The AMD Ryzen AI 5 330, with a 0.7% higher score, would offer marginally better performance, but the difference is negligible in practice. For the GPU, the AMD Radeon RX 6600M’s 0.4% lower score translates to a sub-1 FPS difference at the measured averages, so it is a viable alternative for players who cannot find an RTX 3080.

The Verdict

Based on the verdictByResolution data, this combination of Intel Core i5-12400 and NVIDIA GeForce RTX 3080 can run Archeage at all three tested resolutions, but with varying degrees of quality. At 1920x1080, all four presets (Low, Medium, High, Ultra) are playable, with the best settings being Ultra at 86.1 FPS. This resolution delivers the most flexible experience, allowing players to max out the game with a comfortable frame rate. At 2560x1440, the playable settings are High, Low, and Medium, with the best being High at 85.1 FPS. Ultra at this resolution (58.5 FPS) is not playable, so players must accept a slight reduction in quality to stay above 60 FPS. At 3840x2160, only Low and Medium are playable, with the best being Medium at 66.4 FPS. High and Ultra at 4K are not recommended, as they fall to 44.7 FPS and 34.2 FPS respectively.

The verdict is clear: this PC is a strong performer for 1080p and 1440p gaming, offering high frame rates at maximum or near-maximum settings. For 4K gaming, it is a capable machine but requires users to dial back to Medium settings to maintain playability. The data shows that the system’s GPU is the limiting factor at higher resolutions, while the CPU provides ample headroom for the game’s MMO workload.

FAQ

Q: What is the highest playable setting at 1920x1080?

A: At 1920x1080, the Ultra preset is playable, averaging 86.1 FPS, which is above the 60 FPS threshold.

Q: Can this system run Archeage at 2560x1440 on Ultra?

A: No, the Ultra preset at 2560x1440 averages 58.5 FPS, which is below the 60 FPS playability threshold. The highest playable setting at this resolution is High, averaging 85.1 FPS.

Q: Which resolution and preset combination provides the highest average FPS?

A: The highest average FPS is achieved at 1920x1080 with Low settings, which produces 204.6 FPS.

Q: At 3840x2160, which presets are above 60 FPS?

A: At 3840x2160, the Low preset (81 FPS) and Medium preset (66.4 FPS) are above 60 FPS. High (44.7 FPS) and Ultra (34.2 FPS) are below the threshold.

Q: How does the CPU compare to its nearest rival?

A: The Intel Core i5-12400 has an average benchmark score of 18683, which is 0.1% higher than the AMD EPYC 7643 (18697) and 0.9% higher than the Intel Core i3-14100F (18519).

Q: What is the GPU’s percentile ranking among all GPUs?

A: The NVIDIA GeForce RTX 3080 is in the 68th percentile of all GPUs, with an average benchmark score of 23172.

How This Combo Ranks

In the database of tested hardware combinations for Archeage, this Intel Core i5-12400 + NVIDIA GeForce RTX 3080 combo ranks 1016th out of 3708 tested configurations. This places it in the top 27.4% of all tested combos, indicating that it is a solid performer for this game. The rank reflects the combined capabilities of the CPU and GPU, where the CPU’s 72nd percentile ranking and the GPU’s 68th percentile ranking contribute to a system that is above average for Archeage. The data shows that this combo outperforms the majority of tested systems, with the measured FPS confirming that it can handle the game’s requirements at 1080p and 1440p with ease, and at 4K with settings adjustments. The rank is determined by the aggregate benchmark scores of both components, and the measured FPS data aligns with this ranking, showing consistent performance across resolutions.