Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 32 | 47 | 52 |
| 1440p QHD | 38 | 55 | 81 | 91 |
| 1080p Full HD | 56 | 82 | 121 | 136 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 5050 presents a specific performance profile for Archeage, a 2014 MMORPG. This analysis draws exclusively from recorded benchmark data, examining frame rates across three resolutions and four quality presets. The core question is straightforward: where does this combination deliver playable performance, defined as 60 frames per second or higher?
Best Settings per Resolution
At 1920x1080, the highest preset that maintains at least 60 FPS on average is High, with a recorded average of 82 FPS. The data shows that both Low and Medium presets also exceed the threshold, but High is the most demanding option that still clears the target. Ultra falls short at 56 FPS average, so it is not recommended for smooth play.
At 2560x1440, the best playable setting is Medium, which achieves an average of 81 FPS. This is notably close to the 1080p High result, indicating that the resolution scaling from 1080p to 1440p is manageable for this hardware. Low also clears 60 FPS with 91 FPS average, but Medium delivers higher visual quality while remaining comfortably above the threshold. High and Ultra both drop below 60 FPS, with averages of 55 and 38 respectively.
At 3840x2160, no preset reaches 60 FPS. The closest is Low with 52 FPS average, followed by Medium at 47 FPS, High at 32 FPS, and Ultra at 22 FPS. The verdict data confirms that 4K is not playable at any setting for this combination, so the recommendation is to avoid this resolution or accept a sub-60 experience.
FAQ
Q: Can this PC run Archeage at 1080p with maximum settings?
A: No. At Ultra preset, the average frame rate is 56 FPS, which is below the 60 FPS playable threshold. The highest preset that stays at or above 60 FPS is High, with an average of 82 FPS.
Q: What is the best preset for 1440p gaming?
A: Medium is the most demanding preset that maintains 60 FPS at 2560x1440, averaging 81 FPS. Low also works at 91 FPS, but Medium offers better quality without sacrificing smoothness.
Q: Is 4K playable with this hardware?
A: No. At 3840x2160, even the Low preset only reaches 52 FPS average. Medium averages 47 FPS, High averages 32 FPS, and Ultra averages 22 FPS. None of these meet the 60 FPS threshold.
Q: How does the frame rate change between 1080p and 1440p at Medium settings?
A: At 1920x1080 Medium, the average is 121 FPS with a minimum of 103 and maximum of 139. At 2560x1440 Medium, the average drops to 81 FPS with a minimum of 69 and maximum of 93. This represents a 33% reduction in average frame rate.
Q: What are the minimum frame rates at the playable settings?
A: For 1080p Medium, the minimum recorded is 103 FPS. For 1440p Medium, the minimum is 69 FPS. The data does not list minimum frame rates for Low or High presets at any resolution, nor for 4K settings.
Q: Which resolution offers the highest average frame rate?
A: 1920x1080 with Low settings produces the highest average at 136 FPS. The next highest is 1080p Medium at 121 FPS, followed by 1440p Low at 91 FPS.
Measured FPS Breakdown
The recorded measurements provide a complete picture of performance scaling. At 1920x1080, the frame rate hierarchy is clear. Low settings produce an average of 136 FPS. Medium settings yield 121 FPS average, with minimum and maximum values of 103 and 139 FPS. High settings drop to 82 FPS average. Ultra settings fall to 56 FPS average, which is the only preset at this resolution that misses the 60 FPS target.
At 2560x1440, the same pattern emerges but with lower overall numbers. Low settings average 91 FPS. Medium settings average 81 FPS, with a minimum of 69 and maximum of 93 FPS. High settings average 55 FPS. Ultra settings average 38 FPS. The gap between Low and Medium is only 10 FPS, while the drop from Medium to High is 26 FPS, and from High to Ultra is 17 FPS. This suggests that the Ultra preset introduces a significant rendering cost beyond High.
At 3840x2160, the performance falls below playable levels across the board. Low settings average 52 FPS. Medium settings average 47 FPS, with a minimum of 40 and maximum of 53 FPS. High settings average 32 FPS. Ultra settings average 22 FPS. The scaling from 1440p to 4K is steep: at Medium, the average drops from 81 to 47 FPS, a 42% reduction. At High, the average drops from 55 to 32 FPS, a 42% reduction as well. At Low, the average drops from 91 to 52 FPS, a 43% reduction.
The minimum and maximum values are only recorded for Medium settings at each resolution. At 1080p Medium, the range is 103 to 139 FPS, which is a 36 FPS spread. At 1440p Medium, the range is 69 to 93 FPS, a 24 FPS spread. At 4K Medium, the range is 40 to 53 FPS, a 13 FPS spread. This narrowing range at higher resolutions indicates that the GPU becomes more consistently loaded, reducing frame time variance.
Similar Performance Alternatives
The database lists comparable hardware based on average benchmark scores. For the Intel Core i5-11400F, the closest rivals include the AMD EPYC 7H12, which scores 0.3% higher, and the Intel Core Ultra 7 164U, which scores 0.6% higher. On the lower side, the Intel Core i5-12450H trails by 0.4%, and the AMD Ryzen 3 PRO 8300G trails by 0.6%. These deltas are minimal, meaning any of these processors would likely produce nearly identical frame rates in Archeage, assuming the same GPU.
For the NVIDIA GeForce RTX 5050, the nearest rivals are more varied. The AMD Radeon RX Vega M GL scores 0.6% lower, while the AMD Radeon HD 8970M scores 1% lower. The AMD Radeon RX 5600 XT scores 1.6% higher, and the NVIDIA RTX A4000 Mobile scores 1.6% lower. Again, these differences are small enough that the gaming experience would be comparable. A system with the RTX 5050 and any of these rival GPUs would likely land within a few frames per second of the measured results at each resolution and preset.
The practical takeaway is that this CPU and GPU combination sits in a narrow performance band. Users upgrading from a slightly weaker CPU or GPU would see modest gains, while those coming from a slightly stronger part would see equally modest losses. The bottleneck characteristics are likely shared across these alternatives, meaning the same resolution and preset recommendations would apply.
The Verdict
The recorded verdict data answers the core question directly. At 1920x1080, the playable settings are High, Low, and Medium, with High being the best option at 82 FPS average. This clears the 60 FPS threshold by a comfortable margin. At 2560x1440, the playable settings are Low and Medium, with Medium being the best option at 81 FPS average. This also clears the threshold. At 3840x2160, there are no playable settings, as every preset falls below 60 FPS.
This PC can run Archeage at 1080p and 1440p with smooth performance, provided the user selects appropriate presets. For 1080p, High is the recommended choice, offering a 26 FPS improvement over Medium while still staying above 60. For 1440p, Medium is the recommended choice, balancing visual quality with a 69 FPS minimum. For 4K, the hardware is not sufficient for a 60 FPS experience, so users should either lower the resolution or accept reduced frame rates.
The data also shows a consistent pattern: the Ultra preset is rarely viable. At 1080p, it misses the threshold by 4 FPS. At 1440p, it misses by 22 FPS. At 4K, it misses by 38 FPS. This suggests that Archeage's Ultra settings carry a heavy load that this GPU cannot sustain at higher resolutions.
How This Combo Ranks
Among all tested combinations in the database, this specific CPU and GPU pairing ranks 2279 out of 3708 combinations. This places it in the lower portion of the ranking, roughly in the 38th percentile. The rank reflects the overall performance across all tested games, not just Archeage, but it indicates that this is not a high-end pairing in the broader context.
For Archeage specifically, the ranking is consistent with the measured frame rates. The combination is capable of 60 FPS at 1080p and 1440p with moderate presets, which covers the majority of gaming scenarios for a game from 2014. The rank also suggests that many other combinations would outperform this setup, particularly those with more powerful GPUs or CPUs, but the practical impact in Archeage is limited by the game's age and system requirements.
The position in the ranking is not a verdict on quality. It simply reflects where this hardware falls relative to the full spectrum of tested systems. For a mid-range desktop CPU paired with a new entry-level GPU, the rank is expected. The frame rate data provides a more useful guide for this specific game.
CPU and GPU Roles
The measured data allows for an analysis of how each component contributes to performance. The scaling between resolutions and presets reveals which part is more influential.
At 1080p, moving from Low to Medium reduces the average from 136 to 121 FPS, a drop of 11%. Moving from Medium to High reduces it from 121 to 82 FPS, a drop of 32%. Moving from High to Ultra reduces it from 82 to 56 FPS, a drop of 32%. The large drops at High and Ultra suggest that the GPU is becoming the limiting factor as the rendering load increases.
At 1440p, the same pattern holds. Low to Medium drops from 91 to 81 FPS, an 11% reduction. Medium to High drops from 81 to 55 FPS, a 32% reduction. High to Ultra drops from 55 to 38 FPS, a 31% reduction. The consistent 32% drop at the High preset across both resolutions points to a GPU-bound scenario, as the CPU would likely show less variation with resolution.
At 4K, the drops are more severe. Low to Medium goes from 52 to 47 FPS, a 10% reduction. Medium to High goes from 47 to 32 FPS, a 32% reduction. High to Ultra goes from 32 to 22 FPS, a 31% reduction. The similarity in percentage drops across all three resolutions indicates that the GPU is the dominant constraint at every resolution when using higher presets.
The CPU's role is more visible at lower resolutions and presets. At 1080p Low, the GPU is not heavily taxed, yet the frame rate is 136 FPS. At 1440p Low, it drops to 91 FPS, a 33% reduction. This drop is larger than the resolution scaling alone would suggest, indicating that the GPU starts to become more involved even at Low settings. However, the CPU's 6 cores and 12 threads are sufficient to keep up, as the frame rates remain high.
The overall conclusion is that the RTX 5050 is the primary determinant of performance in Archeage. The GPU's capabilities dictate whether a preset is playable, while the CPU provides enough headroom to avoid bottlenecking at the tested settings. Users seeking higher frame rates should look to GPU upgrades first, as the CPU is unlikely to be the limiting factor in this game.