Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 40 | 59 | 67 |
| 1440p QHD | 48 | 70 | 104 | 116 |
| 1080p Full HD | 71 | 105 | 154 | 173 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 3070 is a capable combination for Archeage, a 2014 MMORPG that remains sensitive to both CPU and GPU loads depending on the resolution and quality preset. The recorded data shows that this combo delivers a wide range of frame rates, from a demanding 28 FPS average at 4K Ultra to a fluid 173 FPS average at 1080p Low. The analysis below breaks down how this hardware behaves across resolutions, which settings remain playable, and how the pairing compares to other tested configurations in the database.
Similar Performance Alternatives
The database places the Intel Core i5-11400F in the 71st percentile among all tested CPUs, with an average benchmark score of 17177. The closest rivals in terms of overall CPU performance are the AMD EPYC 7H12, which scores 17120, a 0.3% delta, and the Intel Core i5-12450H, which scores 17239, a negative 0.4% delta. These three processors are effectively within a fraction of a percent of each other in aggregate compute benchmarks. The AMD Ryzen 3 PRO 8300G scores 17278, a negative 0.6% delta, and the Intel Core Ultra 7 164U scores 17074, a positive 0.6% delta. For Archeage, any of these CPUs would deliver nearly identical CPU-bound behavior at lower resolutions where the processor becomes the limiting factor.
For the GPU, the NVIDIA GeForce RTX 3070 sits in the 61st percentile among all tested graphics cards, with an average benchmark score of 17208. Its nearest rival is the AMD Radeon RX 7600 XT, scoring 17083, a 0.7% delta, meaning the RTX 3070 holds a small but measurable lead. The NVIDIA GeForce GTX 690 scores 17037, a 1% delta, and the AMD Radeon HD 7970M scores 17019, a 1.1% delta, both trailing the RTX 3070 by a single percentage point. The NVIDIA Tesla K40c scores 17468, a negative 1.5% delta, which indicates it is slightly faster in raw compute benchmarks. In practice, for Archeage, the RTX 3070 and the RX 7600 XT would produce nearly indistinguishable frame rates at the same settings, while the older GTX 690 and HD 7970M would likely show similar average scores but potentially different frame pacing due to architecture differences.
The data suggests that if a user were to swap the i5-11400F for an i5-12450H or an EPYC 7H12, the change in Archeage performance would be minimal, as the delta is under 1% in aggregate CPU benchmarks. Similarly, replacing the RTX 3070 with an RX 7600 XT would result in a negligible shift, likely within a few frames per second at any given resolution. The combination of these two components forms a balanced mid-range pairing, with neither part dramatically outperforming its direct alternatives.
Best Settings per Resolution
The database records measured frame rates for four settings presets at each of three resolutions. The playable threshold is defined as 60 FPS average. At 3840x2160, the only preset that clears this threshold is Low, which produces an average of 67 FPS. The Medium preset falls just short at 59 FPS, with a minimum of 50 and a maximum of 68, so it is not considered playable by the strict 60 FPS criterion. High averages 40 FPS, and Ultra averages 28 FPS, both well below the threshold. The best settings at 4K are therefore Low, with an average of 67 FPS.
At 2560x1440, three presets pass the 60 FPS mark: Low at 116 FPS, Medium at 104 FPS, and High at 70 FPS. Ultra averages 48 FPS, which fails the threshold. The best settings at 1440p are High, with an average of 70 FPS, as it is the most demanding preset that remains playable. This gives a comfortable margin above 60 FPS, with the average sitting 10 frames higher than the minimum requirement.
At 1920x1080, all four presets clear 60 FPS. Low averages 173 FPS, Medium averages 154 FPS with a minimum of 131 and a maximum of 177, High averages 105 FPS, and Ultra averages 71 FPS. The best settings at 1080p are Ultra, with an average of 71 FPS. This is the only resolution where the Ultra preset is playable, and the margin above 60 FPS is 11 frames, which is acceptable but not massive. The recorded data shows a clear pattern: as resolution drops, the playable preset ceiling rises, from Low at 4K to Ultra at 1080p.
CPU and GPU Roles
The scaling between resolutions and presets reveals how the workload shifts between the CPU and GPU for Archeage. At 1920x1080, the frame rates are very high across all presets, suggesting that the GPU is not the primary constraint at lower resolutions. The jump from Low to Ultra at 1080p is 173 FPS down to 71 FPS, a reduction of 102 FPS, which indicates that the GPU is still doing significant work as quality increases, but the CPU is capable of feeding it enough frames to stay well above 60 FPS even at Ultra.
At 2560x1440, the pattern shifts. Low runs at 116 FPS, Medium at 104 FPS, and High at 70 FPS, but Ultra drops to 48 FPS. The gap between Medium and High is 34 FPS, while the gap between High and Ultra is 22 FPS. This suggests that the GPU becomes more stressed as pixel count and quality settings rise, with Ultra pushing the GPU past its comfortable limit. The CPU still has headroom, as even at 1440p High the average is 70 FPS, which is above the threshold.
At 3840x2160, the GPU dominates the equation. Low averages 67 FPS, Medium drops to 59 FPS, and High falls to 40 FPS, with Ultra at 28 FPS. The difference between Low and Medium at 4K is only 8 FPS, while the difference between Medium and High is 19 FPS, and between High and Ultra is 12 FPS. The GPU is clearly the limiting factor at this resolution, as the CPU cannot compensate for the massive pixel load. The i5-11400F has 6 cores and 12 threads, with a boost clock of 4.40 GHz, which provides enough single-thread performance for Archeage, but at 4K the GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are stretched thin.
The data indicates that across all resolutions, the CPU is sufficient for the game, as even at 1080p Ultra the combo maintains 71 FPS. The GPU becomes the bottleneck starting at 1440p Ultra and becomes the dominant constraint at 4K. For users aiming for 60 FPS, the CPU is never the issue; the GPU determines which preset is viable at each resolution.
FAQ
Q: Can this combination run Archeage at 4K with Medium settings?
A: No. The recorded average FPS at 3840x2160 with Medium settings is 59, which is 1 frame below the 60 FPS playable threshold. The minimum FPS is 50, so there are dips below the target. Low settings are the only playable option at 4K, averaging 67 FPS.
Q: What is the highest quality preset that stays at or above 60 FPS at 2560x1440?
A: High settings, with an average of 70 FPS. Low and Medium also pass the threshold, at 116 and 104 FPS respectively, but High is the most demanding preset that remains playable. Ultra fails at 48 FPS.
Q: How does the RTX 3070 compare to its nearest GPU rival in the database?
A: The RTX 3070 has an average benchmark score of 17208, while the AMD Radeon RX 7600 XT scores 17083, a 0.7% delta in favor of the RTX 3070. This means the two cards perform nearly identically in synthetic benchmarks, and in Archeage the frame rate difference would be negligible.
Q: Is the Intel Core i5-11400F a bottleneck at 1080p Ultra?
A: No. At 1920x1080 with Ultra settings, the combo averages 71 FPS, which is above the 60 FPS threshold. The CPU's aggregate benchmark score places it in the 71st percentile, and its nearest rivals are within 0.6% in performance, so it does not hold back the GPU at this resolution.
Q: What is the minimum FPS recorded for the Medium preset at 1920x1080?
A: The minimum FPS is 131, with an average of 154 and a maximum of 177. This shows a stable frame delivery with no dips below the playable threshold.
Q: How many tested combinations does this CPU and GPU pairing rank above in Archeage?
A: The combo ranks 1589 out of 3708 tested combinations in the database for this game. This places it in the upper portion of the rankings, but not in the top tier, reflecting the fact that the GPU is only in the 61st percentile.
Measured FPS Breakdown
The following table details the exact recorded frame rates for every resolution and settings combination.
At 3840x2160, the Low preset averages 67 FPS with no minimum or maximum recorded. Medium averages 59 FPS, with a minimum of 50 and a maximum of 68. High averages 40 FPS, and Ultra averages 28 FPS. For Medium, the minimum of 50 FPS is notable, as it falls 10 frames below the playable threshold, indicating occasional stutter even though the average is close to 60.
At 2560x1440, Low averages 116 FPS, Medium averages 104 FPS with a minimum of 88 and a maximum of 119, High averages 70 FPS, and Ultra averages 48 FPS. The Medium preset shows a wider spread, with a 31 FPS gap between minimum and maximum, but the minimum of 88 FPS remains comfortably above 60. High has no recorded minimum or maximum, but the average of 70 FPS suggests a consistent experience.
At 1920x1080, Low averages 173 FPS, Medium averages 154 FPS with a minimum of 131 and a maximum of 177, High averages 105 FPS, and Ultra averages 71 FPS. The Medium preset at 1080p has the tightest relative spread, with the minimum 23 frames below the average and the maximum 23 frames above, indicating a stable frame delivery. Ultra at 1080p averages 71 FPS, which is the lowest of all playable presets at this resolution, but still above the threshold.
The data shows a clear trend: the average FPS decreases as resolution and settings quality increase, and the gap between presets widens at higher resolutions. For example, the difference between Low and Ultra at 1080p is 102 FPS, while at 4K it is 39 FPS, because the GPU is already saturated at 4K Low.
How This Combo Ranks
In the database for Archeage, this specific CPU and GPU combination holds rank 1589 out of 3708 tested combinations. This puts it in the 43rd percentile of all tested setups, meaning roughly 57% of other combinations outperform it in this game. The ranking reflects a mid-field position, which aligns with the component-level percentiles: the CPU is in the 71st percentile and the GPU is in the 61st percentile, but the game's actual performance is constrained by the GPU at higher resolutions and by the CPU at lower resolutions.
The rank of 1589 suggests that while this combo is far from the weakest, it is also not among the top performers. Many combinations with higher-end GPUs or newer CPUs will achieve higher frame rates, especially at 4K where the RTX 3070's 8 GB memory and 20.31 TFLOPS of FP32 compute are sufficient for Low settings but not for higher presets. Conversely, combinations with weaker CPUs but similar GPUs might rank slightly lower, as the i5-11400F provides solid single-thread performance with a boost clock of 4.40 GHz, which helps in an MMORPG like Archeage that relies on CPU logic for game systems.
The rank also indicates that the combo is playable in a majority of scenarios, as the recorded data shows 60 FPS or above at 1080p for all presets, at 1440p for three presets, and at 4K for one preset. For a game released in 2014, this hardware is more than sufficient for mainstream gaming, but it does not dominate the rankings due to the GPU's mid-tier position.
The Verdict
The Intel Core i5-11400F and NVIDIA GeForce RTX 3070 can run Archeage, but the playable settings depend heavily on the resolution. At 1920x1080, the combo clears the 60 FPS threshold at every preset, with Ultra averaging 71 FPS, High at 105 FPS, Medium at 154 FPS, and Low at 173 FPS. This is the resolution where the hardware is fully capable of delivering a smooth experience at maximum quality.
At 2560x1440, the playable presets are High, Medium, and Low, with High averaging 70 FPS, Medium at 104 FPS, and Low at 116 FPS. Ultra drops to 48 FPS, which is not playable. For users with a 1440p monitor, High settings provide a solid 70 FPS average, which is 10 frames above the threshold.
At 3840x2160, the only playable preset is Low, with an average of 67 FPS. Medium falls to 59 FPS, which misses the 60 FPS threshold by 1 frame, and High and Ultra are far below at 40 and 28 FPS respectively. For 4K gaming, the user must accept Low settings to maintain playability, or drop to a lower resolution for higher quality.
Overall, this combo is a strong 1080p and 1440p performer, with 1080p Ultra being the clear sweet spot. At 4K, it is limited to Low settings, which may be acceptable for a game from 2014 but is not ideal for users seeking high visual fidelity. The data supports a verdict of playable at all resolutions, but with significant quality concessions required at 4K.