Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

47%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
118 FPS
Ultra 1080p Measured
48 FPS

1440p (2K / QHD)

Low 1440p Measured
79 FPS
Ultra 1440p Measured
34 FPS

4K (Ultra HD)

Low 4K Measured
43 FPS
Ultra 4K Measured
21 FPS
14.3ms Frame Time
21ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 17,177
Graphics Card
Required 28,463
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 21 27 42 43
1440p QHD 34 48 71 79
1080p Full HD 48 70 103 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 118
1920x1080 Medium 103
1920x1080 Ultra 48
2560x1440 High 48
2560x1440 Low 79
2560x1440 Medium 71
2560x1440 Ultra 34
3840x2160 High 27
3840x2160 Low 43
3840x2160 Medium 42
3840x2160 Ultra 21

Performance Analysis: Archeage on Your System

The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 2060 is a mid-range combination that was common in gaming builds around the early 2020s. For a game like Archeage, an MMORPG from 2014, the performance profile is heavily dependent on resolution and graphics presets. The recorded data shows a clear pattern: this combo delivers smooth 60 FPS gameplay at 1080p and 1440p with specific settings, but it cannot handle 4K at playable frame rates. The following analysis breaks down the measured FPS results, identifies the best settings for each resolution, and contextualizes the hardware's performance against its nearest rivals.

Measured FPS Breakdown

The measured FPS data for Archeage covers three resolutions and four quality presets. All values are average frame rates, as the database recorded no minimum or maximum FPS figures for this title.

At 1920x1080, the combo delivers its strongest results. The Low preset produces an average of 117.8 FPS, which is the highest recorded figure across all tests. The Medium preset follows with 102.7 FPS, and the High preset drops to 70.2 FPS. The Ultra preset, however, falls well below the playable threshold at 47.5 FPS. The gap between Low and Medium is 15.1 FPS, while the drop from Medium to High is a more significant 32.5 FPS. The transition from High to Ultra represents another sharp decline of 22.7 FPS.

At 2560x1440, the overall performance scales down noticeably. The Low preset averages 78.7 FPS, which is still comfortably above 60 FPS. The Medium preset averages 71 FPS, also above the threshold. The High preset drops to 47.7 FPS, and the Ultra preset falls to 33.6 FPS. The pattern here mirrors 1080p: the Low to Medium step costs only 7.7 FPS, but the Medium to High step costs 23.3 FPS, and the High to Ultra step costs another 14.1 FPS.

At 3840x2160, the combo struggles across the board. The Low preset averages 43 FPS, the Medium preset averages 41.9 FPS, and the High preset averages 27.3 FPS. The Ultra preset is the weakest result in the entire dataset at 20.7 FPS. Interestingly, the Low and Medium presets at 4K produce nearly identical frame rates, with a difference of only 1.1 FPS. The drop from Medium to High is substantial at 14.6 FPS, and the High to Ultra step costs another 6.6 FPS.

The data indicates that Archeage is sensitive to the transition from Medium to High settings at every resolution. This suggests a significant increase in rendering workload at the High preset, likely related to shadows, draw distance, or post-processing effects that are not reflected in the simpler preset names.

Best Settings per Resolution

The database defines playable performance as an average of at least 60 FPS. Using this threshold, the best settings for each resolution are determined by the most demanding preset that still maintains 60 FPS or higher.

At 1920x1080, the High preset is the best playable option, averaging 70.2 FPS. This is the highest quality setting that clears the threshold. The Ultra preset at this resolution averages 47.5 FPS, which is not playable. The margin between High and the threshold is 10.2 FPS, providing a small buffer for demanding scenes common in MMORPGs, such as large player gatherings or complex raid encounters.

At 2560x1440, the Medium preset is the best playable option, averaging 71 FPS. The Low preset also clears the threshold at 78.7 FPS, but Medium offers higher visual quality while still maintaining a comfortable margin above 60 FPS. The High preset at 1440p averages 47.7 FPS, which is 12.3 FPS below the threshold and therefore not recommended for smooth gameplay.

At 3840x2160, no preset achieves 60 FPS. The best result is the Low preset at 43 FPS, which is 17 FPS below the playable threshold. The Medium preset is nearly identical at 41.9 FPS, and both High and Ultra are well below any reasonable playability standard. The verdict data confirms that 4K is not viable for this combination in Archeage.

CPU and GPU Roles

The measured data allows for an analysis of which component plays a larger role in Archeage performance at each resolution.

At 1920x1080, the GPU appears to be the primary bottleneck, but the CPU still matters. The scaling from Low to Ultra shows a wide spread of 70.3 FPS, from 117.8 FPS down to 47.5 FPS. This indicates that the GPU workload scales heavily with preset quality. However, the fact that the combo can exceed 117 FPS at Low settings suggests that the Intel Core i5-11400F is capable of feeding the GPU efficiently at this resolution. The CPU has 6 cores and 12 threads, with a boost clock of 4.40 GHz, and its benchmark scores place it in the 71st percentile of all CPUs. This is sufficient to avoid bottlenecking the RTX 2060 at 1080p.

At 2560x1440, the GPU becomes more clearly the limiting factor. The spread from Low to Ultra is 45.1 FPS, from 78.7 FPS down to 33.6 FPS. The lower average frame rates at every preset compared to 1080p indicate that the increased pixel count is stressing the GPU more than the CPU. The RTX 2060 has 6 GB of GDDR6 memory on a 192-bit bus, with a memory bandwidth of 336.0 GB/s. At 1440p, the higher memory pressure and pixel fill rate requirements shift the balance toward the GPU.

At 3840x2160, the GPU is overwhelmingly the dominant constraint. The best result at this resolution is 43 FPS on Low settings, which is less than half the 117.8 FPS achieved at 1080p Low. The RTX 2060 has a pixel rate of 80.64 GPixel/s and a texture rate of 201.6 GTexel/s, and the data shows that these resources are insufficient for 4K rendering in Archeage at any preset. The Intel Core i5-11400F, with its 12 MB of shared L3 cache and dual-channel DDR4 memory support, is not the limiting factor here; even the weakest GPU result of 20.7 FPS at Ultra is far below what the CPU is capable of feeding.

The scaling between presets also reveals the CPU's role. At 1080p, the difference between Low and Medium is 15.1 FPS, while at 1440p the same step costs only 7.7 FPS. This narrowing gap at higher resolutions is a classic sign of GPU-bound behavior. The CPU is doing its job at all resolutions, but the GPU workload dominates as resolution increases.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-11400F provide context for its CPU-level performance. The AMD EPYC 7H12 scores 17120 on average, which is 0.3 percent lower than the i5-11400F's average benchmark score of 17177. The Intel Core i5-12450H scores 17239, which is 0.4 percent higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6 percent higher. The Intel Core Ultra 7 164U scores 17074, 0.6 percent lower. These deltas are all within one percent, meaning any of these CPUs would deliver nearly identical frame rates in Archeage when paired with the same GPU.

For the NVIDIA GeForce RTX 2060, the nearest rivals are similarly close. The NVIDIA GeForce GTX 580 scores 15283, which is 0 percent different from the RTX 2060's average score of 15290. The AMD Radeon 680M scores 15270, 0.1 percent lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6 percent lower. The AMD Radeon RX 7600 scores 15171, 0.8 percent lower. All four GPUs are within one percent of the RTX 2060's average benchmark score, so they would all produce comparable FPS results in Archeage.

A system with any of these CPU alternatives and the RTX 2060 would behave nearly identically to the i5-11400F combo. Likewise, a system with the i5-11400F and any of the GPU alternatives would land in the same performance band. The practical takeaway is that this combo sits in a crowded performance tier, and users with any of these nearby parts should expect similar playability outcomes in Archeage.

How This Combo Ranks

The database ranks this specific CPU and GPU combination against all other tested combos for Archeage. The combo ranks 2921 out of 3708 total combinations. This places it in the lower half of all tested systems, which makes sense given that Archeage is an older title and many newer, higher-end combinations would outperform it.

The rank reflects the fact that this combo can handle 1080p and 1440p at playable frame rates with the right presets, but it cannot reach 60 FPS at 4K or at Ultra settings at any resolution. Out of 3708 tested combos, 787 rank below this one. The percentile position indicates that while this is not a top-tier system, it still outperforms a substantial portion of the database.

FAQ

Q: Can this PC run Archeage at 1920x1080?

A: Yes. The High preset averages 70.2 FPS, which is above the 60 FPS playable threshold. The Low and Medium presets also clear the threshold at 117.8 FPS and 102.7 FPS respectively. The Ultra preset averages 47.5 FPS and is not playable.

Q: What is the best setting for 2560x1440?

A: The Medium preset is the best playable option, averaging 71 FPS. The Low preset also works at 78.7 FPS, but Medium offers higher quality while remaining above the 60 FPS threshold. High and Ultra presets at this resolution average 47.7 FPS and 33.6 FPS, which are below playable levels.

Q: Is 4K playable with this hardware?

A: No. The best result at 3840x2160 is the Low preset at 43 FPS, which is 17 FPS below the 60 FPS threshold. Medium averages 41.9 FPS, High averages 27.3 FPS, and Ultra averages 20.7 FPS. No 4K preset reaches playable performance.

Q: How does the Intel Core i5-11400F compare to its nearest rivals?

A: The i5-11400F has an average benchmark score of 17177. The AMD EPYC 7H12 is 0.3 percent lower, the Intel Core i5-12450H is 0.4 percent higher, the AMD Ryzen 3 PRO 8300G is 0.6 percent higher, and the Intel Core Ultra 7 164U is 0.6 percent lower. All are within one percent of each other.

Q: How does the NVIDIA GeForce RTX 2060 compare to its nearest rivals?

A: The RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 is 0 percent different, the AMD Radeon 680M is 0.1 percent lower, the NVIDIA GeForce RTX 3050 OEM is 0.6 percent lower, and the AMD Radeon RX 7600 is 0.8 percent lower. All are within one percent of the RTX 2060.

Q: What is the combo's rank in the database?

A: This combo ranks 2921 out of 3708 tested combinations for Archeage. It sits in the lower half of all tested systems, reflecting its mid-range status in the current database.

The Verdict

The Intel Core i5-11400F and NVIDIA GeForce RTX 2060 can run Archeage, but the playable experience depends heavily on resolution and settings. At 1920x1080, the combo clears the 60 FPS threshold at High, Medium, and Low presets, with the best playable setting being High at 70.2 FPS. At 2560x1440, the Medium preset is the best playable option at 71 FPS, with Low also viable at 78.7 FPS. At 3840x2160, no preset reaches 60 FPS; the best result is Low at 43 FPS.

The data shows a clear verdict: this system is suitable for 1080p gaming with high visual quality and 1440p gaming with medium visual quality. It is not suitable for 4K gaming or for Ultra settings at any resolution. Players who prioritize frame rate over visual fidelity can push to 117.8 FPS at 1080p Low, but those who want a balanced experience should target 1080p High or 1440p Medium. The combo's rank of 2921 out of 3708 confirms that it is a functional mid-range system, capable of delivering smooth gameplay in Archeage at mainstream resolutions, but not at the extreme end of the resolution spectrum.