Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 44 | 65 | 96 | 108 |
| 1440p QHD | 78 | 114 | 142 | 148 |
| 1080p Full HD | 115 | 140 | 162 | 169 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Measured FPS Breakdown
The recorded data for Archeage with the Intel Core i5-10400F and NVIDIA GeForce RTX 5080 spans three resolutions and four quality presets. The measurements show a clear pattern: the combo scales predictably as resolution drops, with frame rates rising sharply at lower pixel counts.
At 3840x2160, the highest resolution measured, the Low preset delivers an average of 108 FPS. The Medium preset averages 96 FPS, with a recorded minimum of 81 FPS and a maximum of 110 FPS. High settings average 65 FPS. The Ultra preset falls to an average of 44 FPS, which is below the 60 FPS playability threshold used by the database.
At 2560x1440, the frame rate picture improves substantially. Low settings average 148 FPS. Medium settings average 142 FPS, with a minimum of 121 FPS and a maximum of 164 FPS. High settings average 114 FPS. Ultra settings average 78 FPS, clearing the 60 FPS threshold with room to spare.
At 1920x1080, the combo reaches its highest measured performance. Low settings average 169 FPS. Medium settings average 162 FPS, with a minimum of 138 FPS and a maximum of 187 FPS. High settings average 140 FPS. Ultra settings average 115 FPS, still comfortably above the 60 FPS threshold.
The data shows that the gap between Low and Ultra narrows as resolution decreases. At 4K, the delta between Low and Ultra is 64 FPS (108 versus 44). At 1440p, the delta is 70 FPS (148 versus 78). At 1080p, the delta is 54 FPS (169 versus 115). The Medium preset consistently sits between Low and High, with the minimum and maximum values only recorded for Medium across all resolutions.
How This Combo Ranks
The database places this combination at rank 637 out of 3,708 tested combos for Archeage. That puts it in the upper tier of tested systems, roughly in the 82nd percentile of all recorded combinations. The rank reflects the pairing of a mid-range 10th-generation Intel processor with a high-end GeForce 50-series GPU.
The CPU itself, the Intel Core i5-10400F, holds a percentile rank of 68 against all CPUs in the database. Its average benchmark score is 14,185. The GPU, the NVIDIA GeForce RTX 5080, holds a percentile rank of 87 against all GPUs, with an average benchmark score of 56,083. The combination of a 68th-percentile CPU and an 87th-percentile GPU produces a system that ranks well within the top quartile of Archeage test results.
What this means in practice is that the combo outperforms the majority of recorded systems, but it is not at the very top of the leaderboard. The 637th rank out of 3,708 combos suggests there are 636 configurations that deliver higher measured frame rates in this specific game. Given that the RTX 5080 is a high-end GPU, the limiting factor is likely the older Comet Lake CPU, which cannot feed the GPU fast enough in certain scenarios.
Best Settings per Resolution
The database identifies the most demanding preset that maintains an average of at least 60 FPS at each resolution.
At 3840x2160, the best playable setting is High, with an average of 65 FPS. The Ultra preset drops to 44 FPS, which fails the 60 FPS threshold. Low and Medium also clear the threshold, but High is the highest quality preset that remains playable.
At 2560x1440, the best playable setting is Ultra, with an average of 78 FPS. All four presets clear the 60 FPS threshold at this resolution, so the most demanding option remains viable.
At 1920x1080, the best playable setting is also Ultra, with an average of 115 FPS. Every preset at this resolution clears 60 FPS, and the Ultra preset still has significant headroom above the threshold.
The verdict data confirms these findings: 4K resolution is limited to High as the best playable setting, while 1440p and 1080p both allow Ultra settings with averages of 78 FPS and 115 FPS respectively.
Similar Performance Alternatives
Looking at the nearest rivals in the database, the CPU and GPU each have close neighbors that would produce broadly similar frame rates in this game.
For the Intel Core i5-10400F, the nearest comparable CPUs are the Intel Xeon 6756E with an average score of 14,163, which is 0.2% higher than the i5-10400F. The Intel Core 7 160UL scores 14,232, which is 0.3% lower. The AMD EPYC 7552 scores 14,115, which is 0.5% higher. The AMD Ryzen 3 7320C scores 14,277, which is 0.6% lower. These deltas are all within one percent, meaning any of these processors would deliver nearly identical CPU-bound performance in Archeage.
For the NVIDIA GeForce RTX 5080, the nearest comparable GPUs are the AMD Radeon 8060S with an average score of 55,757, which is 0.6% lower. The AMD Radeon RX 6750 GRE 12 GB scores 55,698, which is 0.7% lower. The AMD Radeon Pro W5700X scores 54,828, which is 2.3% lower. The AMD Radeon RX 9070 GRE scores 57,367, which is 2.2% higher. The closest match is the Radeon 8060S, while the RX 9070 GRE is the only rival that outperforms the RTX 5080 by a meaningful margin.
A system pairing any of the four rival CPUs with the RTX 5080 would produce frame rates nearly identical to the measured results, since the CPU deltas are negligible. Similarly, swapping the RTX 5080 for a Radeon 8060S or RX 6750 GRE would shift FPS by less than one percent, while the RX 9070 GRE would push frame rates slightly higher.
CPU and GPU Roles
The measured data shows how the balance of CPU and GPU influence shifts across resolutions and presets in Archeage.
At 3840x2160, the GPU is the dominant factor. The difference between Low and Ultra settings is 64 FPS, and the Ultra preset drops below the 60 FPS threshold. This indicates the GPU is being pushed to its limits at 4K, especially with the highest quality settings. The CPU has enough headroom to keep up with the GPU's rendering demands at this resolution.
At 2560x1440, the balance shifts somewhat. The spread between Low and Ultra is 70 FPS, and even the Ultra preset clears the threshold comfortably. The GPU still carries most of the load, but the CPU is no longer a bottleneck at any preset. The 148 FPS Low result suggests the system can push well beyond typical display refresh rates at this resolution.
At 1920x1080, the CPU begins to matter more. The spread between Low and Ultra narrows to 54 FPS, and the Low preset reaches 169 FPS. At such high frame rates, the CPU's ability to process game logic and draw calls becomes more relevant. The i5-10400F, with its 6 cores and 12 threads, is sufficient to keep the RTX 5080 fed at 1080p, but the diminishing returns between Low and Medium (169 versus 162 FPS) hint at CPU limitations starting to appear near the top of the range.
The scaling between resolutions reinforces this interpretation. At High settings, moving from 1080p to 1440p reduces the average from 140 to 114 FPS, a drop of 26 FPS. Moving from 1440p to 4K reduces the average from 114 to 65 FPS, a drop of 49 FPS. The larger drop at higher resolutions confirms that the GPU becomes progressively more stressed as pixel count increases. At Low settings, the drops are smaller: 169 to 148 to 108 FPS, showing that the CPU can hold a higher floor when the GPU has less work to do.
FAQ
Q: Can this system run Archeage at 4K resolution?
A: Yes, but only up to High settings. The High preset averages 65 FPS at 3840x2160. The Ultra preset drops to 44 FPS, which fails the 60 FPS playability threshold.
Q: What is the best settings preset at 1440p?
A: The Ultra preset is the best playable option at 2560x1440, averaging 78 FPS. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold at this resolution.
Q: How does the Medium preset perform at 1080p?
A: The Medium preset at 1920x1080 averages 162 FPS, with a minimum of 138 FPS and a maximum of 187 FPS. This is the only preset in the database that includes recorded minimum and maximum values.
Q: What is the combo's overall rank in the database?
A: This combination ranks 637th out of 3,708 tested combos for Archeage. The CPU sits in the 68th percentile of all CPUs, and the GPU sits in the 87th percentile of all GPUs.
Q: Which GPU rivals are closest in performance to the RTX 5080?
A: The AMD Radeon 8060S is 0.6% slower, the AMD Radeon RX 6750 GRE 12 GB is 0.7% slower, and the AMD Radeon Pro W5700X is 2.3% slower. The AMD Radeon RX 9070 GRE is 2.2% faster.
Q: Is the Ultra preset playable at any resolution?
A: Yes. The Ultra preset clears 60 FPS at both 2560x1440 (78 FPS average) and 1920x1080 (115 FPS average). At 3840x2160, the Ultra preset averages 44 FPS and is not playable.
The Verdict
This PC can run Archeage, and it can do so with high quality settings at most resolutions. The verdict data is clear: at 3840x2160, the playable settings are High, Low, and Medium, with High being the best option at 65 FPS. At 2560x1440, all four presets are playable, with Ultra as the best option at 78 FPS. At 1920x1080, all four presets are playable, with Ultra as the best option at 115 FPS.
The only scenario where this system fails to meet the 60 FPS threshold is 4K with Ultra settings, where the average drops to 44 FPS. For players who want the highest visual fidelity at 4K, the RTX 5080 is not sufficient for this game. Backing off to High settings restores playability with a 65 FPS average.
For 1440p and 1080p displays, this combination delivers a fully playable experience at maximum settings, with enough headroom to handle demanding scenes. The i5-10400F does not appear to bottleneck the RTX 5080 in Archeage at these resolutions, and the system ranks in the top 18% of all tested combos for this game.
The practical takeaway is straightforward: this system is well suited for Archeage at 1440p and 1080p with everything maxed out. At 4K, it requires a moderate settings reduction to maintain smooth frame rates. The recorded data shows no configuration where the game becomes unplayable below 60 FPS except for the single Ultra 4K case.