Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 41 | 58 | 64 |
| 1440p QHD | 44 | 63 | 97 | 109 |
| 1080p Full HD | 64 | 100 | 147 | 165 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5060 delivers a wide range of performance in Archeage, scaling predictably with resolution and graphical presets. The recorded data shows this combination is capable of crossing the 60 FPS threshold at every tested resolution, but the margin of comfort varies significantly depending on the settings selected. At 1080p, the system is overwhelmingly capable, while at 4K, it requires a more conservative approach to settings to maintain smooth gameplay. This analysis breaks down the measured FPS data, compares the hardware to nearby alternatives, and provides clear guidance on the best settings for each resolution.
Measured FPS Breakdown
The benchmark results for this combination reveal a clear pattern where performance drops as resolution increases, and the gap between the Low and Ultra presets widens substantially at higher resolutions.
At 1920x1080, the system shows its strongest performance. With the Low preset, the average FPS reaches 164.7, offering an exceptionally smooth experience. Moving to the Medium preset, the average drops to 146.6 FPS, still far above the 60 FPS threshold. The High preset yields an average of 100 FPS, which remains highly fluid for an MMORPG. The most demanding preset at this resolution, Ultra, still manages an average of 64.4 FPS, which is just above the playable threshold. The data indicates that even at maximum settings, this combo holds its ground at 1080p.
Stepping up to 2560x1440, performance remains strong but starts to show the strain of higher pixel counts. The Low preset delivers an average of 109 FPS, a substantial figure. The Medium preset averages 96.7 FPS, while High settings produce 63.4 FPS, just clearing the 60 FPS line. The Ultra preset, however, falls below the threshold with an average of 44.1 FPS. This suggests that at 1440p, users should stick to High or lower for consistent smoothness, as the jump to Ultra represents a significant performance cost.
At 3840x2160, the system's limits become apparent. The Low preset is the only setting that clears the 60 FPS bar, with an average of 64.3 FPS. The Medium preset drops to 57.8 FPS, which is close but technically below the playable threshold. High settings average 40.8 FPS, and Ultra falls to 23.3 FPS, making those presets impractical for smooth gameplay at 4K. The recorded data shows a steep decline from Low to Ultra at this resolution, with a difference of 41 FPS between the two extremes.
No minimum or maximum FPS values were recorded for any of the tested configurations, so the analysis relies solely on average FPS figures. The pattern across all resolutions is consistent: the step from Medium to High and from High to Ultra incurs notable performance penalties, while the step from Low to Medium is comparatively smaller.
Similar Performance Alternatives
The database provides nearest rival scores for both the CPU and GPU, which helps contextualize where this hardware sits relative to similar components.
For the Intel Core i5-10400F, the average benchmark score is 14185. Its closest rival, the Intel Xeon 6756E, scores 14163, which is 0.2% lower. The Intel Core 7 160UL scores 14232, placing it 0.3% higher than the i5-10400F. The AMD EPYC 7552 scores 14115, a 0.5% difference, and the AMD Ryzen 3 7320C scores 14277, which is 0.6% higher. These deltas are all within a single percentage point, indicating that the i5-10400F performs in a very tight band with these four processors. In real-world terms, swapping to any of these CPUs would likely produce nearly identical frame rates in Archeage, as the differences are negligible.
On the GPU side, the NVIDIA GeForce RTX 5060 has an average benchmark score of 26331, placing it in the 72nd percentile among all tested GPUs. Its nearest rival, the AMD Radeon 860M, scores 26401, which is 0.3% higher. The NVIDIA GeForce MX550 matches closely with a score of 26421, also 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, a 0.8% advantage, while the AMD Radeon RX 6750 XT scores 26011, which is 1.2% lower than the RTX 5060. These small deltas suggest that a user with any of these GPUs would experience very similar performance in Archeage, with the RX 6750 XT being the closest alternative that sits slightly below the RTX 5060.
The percentile rankings place the CPU in the 68th percentile among all CPUs, while the GPU sits in the 72nd percentile among all GPUs. This indicates that both components are above average in their respective categories, with the GPU holding a slightly stronger relative position.
How This Combo Ranks
The database ranks this specific combination against all other tested CPU and GPU pairs for Archeage. The combo ranks 1657 out of 3708 total combinations, placing it in the upper half of all tested systems.
This rank reflects the overall capability of the i5-10400F and RTX 5060 pairing across the full suite of benchmark scenarios. A rank of 1657 out of 3708 means that roughly 44.7% of tested combos perform better, while 55.3% perform worse. Given that this is a mid-range CPU from 2020 paired with a newer GPU, the ranking makes sense: the GPU is strong enough to push high frame rates at lower resolutions, but the CPU's position in the 68th percentile may limit performance in CPU-bound scenarios common in MMOs with many players on screen.
The measured FPS data supports this ranking. The system easily clears 60 FPS at 1080p across all presets, which is more than adequate for the vast majority of players. At 1440p, it remains viable for all but the Ultra preset. At 4K, it is limited to Low settings for a stable experience. This flexibility across resolutions is what keeps the combo in the upper half of the rankings, despite the CPU's age.
The Verdict
The question of whether this PC can run Archeage has a clear answer based on the recorded data: yes, it can, at every resolution tested, provided the right settings are chosen.
At 1920x1080, the system clears the 60 FPS threshold on all four tested presets. The Ultra preset averages 64.4 FPS, which means even maximum settings are playable. This is the resolution where the combo is most comfortable, with no compromises needed.
At 2560x1440, the playable settings are High, Low, and Medium. The High preset averages 63.4 FPS, just above the threshold, while Medium averages 96.7 FPS and Low averages 109 FPS. The Ultra preset falls to 44.1 FPS, so it is not recommended for smooth play. Users at 1440p should stick to High or lower.
At 3840x2160, only the Low preset is playable, averaging 64.3 FPS. The Medium preset comes close at 57.8 FPS but does not quite reach the 60 FPS bar. High and Ultra are well below the threshold. For 4K play, Low settings are the only option that guarantees smooth performance.
In summary, the system runs Archeage at 60 FPS or higher at 1080p on all presets, at 1440p on High and below, and at 4K on Low settings. The verdict by resolution is clear: 1080p offers full freedom, 1440p requires moderate settings, and 4K demands significant compromises.
CPU and GPU Roles
The benchmark data shows how the balance between CPU and GPU workload shifts across resolutions and presets in Archeage.
At 1920x1080, the system delivers very high frame rates, with the Low preset reaching 164.7 FPS and Ultra at 64.4 FPS. The large gap between presets, roughly 100 FPS from Low to Ultra, indicates that the GPU is the primary bottleneck at this resolution. The CPU, with a passmark multithread score of 12115 and a single-thread score of 2541, has enough headroom to feed the GPU at these frame rates, but the GPU's workload increases substantially with each step up in preset.
At 2560x1440, the pattern shifts slightly. The Low preset averages 109 FPS, while Ultra drops to 44.1 FPS. The scaling from Low to Ultra is still steep, but the overall lower frame rates suggest the GPU is taking on more of the load. The CPU's performance becomes less of a limiting factor as the GPU struggles more with the higher pixel count.
At 3840x2160, the GPU is clearly the dominant factor. The Low preset averages 64.3 FPS, but High drops to 40.8 FPS and Ultra to 23.3 FPS. These figures indicate that the RTX 5060's compute resources are saturated by the 4K resolution, and the CPU's role diminishes further. The 33% reduction in frame rate from Low to Ultra at 4K, compared to the 61% reduction at 1080p, shows how the GPU's limitations become more pronounced at higher resolutions.
The CPU's benchmark scores provide context for its role. Its 3dmark single-thread score of 688 and passmark single-thread score of 2541 suggest it handles typical game logic and MMO player interactions adequately. However, in crowded areas with many characters, the CPU could become a limiting factor, though the recorded FPS data does not isolate this scenario. The data available shows that for this game, the GPU is the primary determinant of performance at higher resolutions, while the CPU is sufficient to support high frame rates at 1080p.
Best Settings per Resolution
The database identifies the most demanding preset that stays at or above 60 FPS for each resolution, providing a clear recommendation for users.
At 1920x1080, the best setting is Ultra, with an average FPS of 64.4. This is the highest quality preset available, and it still clears the 60 FPS threshold. Users at 1080p can enable maximum settings without concern.
At 2560x1440, the best setting is High, averaging 63.4 FPS. This provides a solid balance of visual quality and performance. The Medium preset averages 96.7 FPS and Low averages 109 FPS, both also playable, but High offers the best visual fidelity while staying above 60 FPS. The Ultra preset at 44.1 FPS is not recommended.
At 3840x2160, the best setting is Low, with an average of 64.3 FPS. This is the only preset at 4K that clears the threshold. The Medium preset at 57.8 FPS is close, but falls short. Users who prioritize 4K resolution will need to accept Low settings for smooth gameplay.
These recommendations are based strictly on the 60 FPS playable threshold. Users with higher refresh rate monitors may prefer to lower settings further to increase frame rates, while those with 60 Hz displays can follow these guidelines directly.
FAQ
Q: Can this PC run Archeage at 1080p with Ultra settings?
A: Yes. At 1920x1080 with the Ultra preset, the system averages 64.4 FPS, which is above the 60 FPS playable threshold.
Q: What is the highest preset that stays above 60 FPS at 1440p?
A: The High preset averages 63.4 FPS at 2560x1440, making it the most demanding playable option. The Ultra preset drops to 44.1 FPS, which is below the threshold.
Q: Is 4K gameplay possible with this hardware?
A: Yes, but only with the Low preset, which averages 64.3 FPS at 3840x2160. The Medium preset at 57.8 FPS is below the 60 FPS threshold.
Q: How does the RTX 5060 compare to its nearest rival, the AMD Radeon RX 6750 XT?
A: The RTX 5060 has an average benchmark score of 26331, which is 1.2% higher than the RX 6750 XT's score of 26011. The performance difference is minor.
Q: Where does this CPU and GPU combination rank among all tested combos for Archeage?
A: The combo ranks 1657 out of 3708 total combinations, placing it in the upper half of all tested systems.
Q: What is the average FPS difference between Low and Ultra settings at 4K?
A: At 3840x2160, the Low preset averages 64.3 FPS while the Ultra preset averages 23.3 FPS, a difference of 41 FPS.