Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 32 | 47 | 52 |
| 1440p QHD | 38 | 55 | 81 | 91 |
| 1080p Full HD | 56 | 82 | 121 | 136 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5050 delivers a mixed experience in Archeage, depending heavily on your target resolution. At 1080p, this combo handles the game comfortably with high settings, while 1440p remains playable with medium settings. At 4K, the hardware falls short of a smooth experience at any preset, so you will need to lower expectations or consider a different setup. The following analysis breaks down exactly where this pairing stands, what settings to use, and how it compares to other tested configurations.
How This Combo Ranks
Out of 3,708 tested combinations in the database, this specific CPU and GPU pairing ranks 2,279th for Archeage. That places it in the lower half of all recorded configurations, which reflects its limitations at higher resolutions. The ranking is driven primarily by the GPU’s performance ceiling at 4K, where even the least demanding preset only reaches 52 FPS on average, below the 60 FPS playable threshold. At 1080p and 1440p, the combo performs adequately, but the overall rank is pulled down by the 4K results.
The CPU, an Intel Core i5-10400F with 6 cores and 12 threads, sits at the 68th percentile among all CPUs in the database, indicating it is a solid mid-range processor. Its multi-threaded performance is respectable for a 2020 release, with a Cinebench R23 multi-core score of 10,283 and a Geekbench multi-core score of 6,257. Single-thread performance is also reasonable, with a Cinebench R23 single-core score of 1,451 and a Passmark single-thread score of 2,541. These numbers suggest the CPU is not the primary bottleneck in Archeage, except perhaps in very CPU-heavy MMO scenarios, but the recorded data does not isolate CPU-specific frame rates.
The GPU, an NVIDIA GeForce RTX 5050 with 8 GB of GDDR6 memory, ranks at the 66th percentile among all GPUs. Its Passmark G3D score of 17,326 and 3DMark Steel Nomad score of 2,502 indicate it is a capable entry-level to mid-range card for modern titles. However, its memory bandwidth of 320 GB/s and 128-bit bus limit its performance at higher resolutions. The combination of a mid-range CPU and GPU results in a system that is well-suited for 1080p gaming, adequate for 1440p with adjusted settings, and unsuitable for 4K in Archeage.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average frame rate of 82 FPS. This is the sweet spot for this resolution, offering a good balance between visual quality and smoothness. The Medium preset runs at 121 FPS, and Low hits 136 FPS, but High provides the best visual experience without sacrificing playability. The Ultra preset drops to 56 FPS, just below the 60 FPS threshold, so it is not recommended if you want a consistent frame rate.
At 2560x1440, the best playable setting is Medium, with an average of 81 FPS. This preset delivers smooth gameplay while maintaining decent visual fidelity. The Low preset runs at 91 FPS, which is also playable, but Medium offers improved textures and effects. High drops to 55 FPS, below the threshold, and Ultra falls to 38 FPS, making both unsuitable for a 60 FPS target.
At 3840x2160, no preset achieves the 60 FPS threshold. The Low preset comes closest with 52 FPS, followed by Medium at 47 FPS, High at 32 FPS, and Ultra at 22 FPS. None of these are playable by the database’s standard, so 4K is not a viable option for this combo in Archeage.
CPU and GPU Roles
The data shows that the GPU becomes the primary limiting factor as resolution increases, while the CPU maintains consistent performance across all settings. At 1080p, the frame rate scales significantly with preset quality: Low runs at 136 FPS, Medium at 121 FPS, High at 82 FPS, and Ultra at 56 FPS. This indicates that the GPU is fully utilized at this resolution, and the CPU is capable of feeding it enough data. The jump from High to Ultra is a 26 FPS drop, suggesting that Ultra’s additional effects place a heavy load on the GPU.
At 1440p, the frame rates drop across all presets compared to 1080p: Low goes from 136 to 91 FPS, Medium from 121 to 81 FPS, High from 82 to 55 FPS, and Ultra from 56 to 38 FPS. This roughly 30% reduction in performance at each preset level aligns with the increased pixel count, which the GPU must render. The CPU’s role remains static, as its workload is more tied to game logic and draw calls, which are resolution-independent. The recorded data does not show any CPU-specific bottleneck at any resolution.
At 4K, the GPU is clearly overwhelmed. Low preset drops to 52 FPS, a 43% reduction from 1440p Low, and Medium falls to 47 FPS. The gap between High and Ultra at 4K is only 10 FPS (32 vs 22), which suggests that the GPU is so constrained that additional settings have diminishing returns. The CPU, with its 6 cores and 12 threads, is likely not the limiting factor here, as its benchmark scores are adequate for most games. The RTX 5050’s 8 GB VRAM and 128-bit bus are insufficient for 4K rendering in a demanding MMO like Archeage.
Similar Performance Alternatives
Looking at the nearest rivals for the Intel Core i5-10400F, the closest match is the Intel Xeon 6756E, with an average benchmark score of 14,163, which is 0.2% higher than the i5-10400F’s 14,185. The Intel Core 7 160UL scores 14,232, which is 0.3% lower, and the AMD EPYC 7552 scores 14,115, which is 0.5% higher. The AMD Ryzen 3 7320C scores 14,277, which is 0.6% lower. These deltas are all within 1% of the i5-10400F, meaning any of these CPUs would deliver nearly identical frame rates in Archeage, assuming the same GPU. For practical purposes, you would not notice a difference between these processors in this game.
For the NVIDIA GeForce RTX 5050, the nearest rival is the AMD Radeon RX Vega M GL, with an average score of 21,153, which is 0.6% higher than the RTX 5050’s 21,035. The AMD Radeon HD 8970M scores 21,237, which is 1% higher, and the AMD Radeon RX 5600 XT scores 20,713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21,379, which is 1.6% higher. These GPUs are all within 2% of the RTX 5050’s performance, so swapping to any of them would yield nearly the same frame rates at each resolution and preset. For example, if you had an RX 5600 XT instead, you would see roughly 1.6% lower FPS, which is negligible in practice.
It is importantly the RTX 5050’s rivals include both desktop and mobile parts, but the database treats them as equivalent based on their average benchmark scores. In Archeage, the differences among these GPUs are small enough that the playable settings at each resolution would remain the same: 1080p High, 1440p Medium, and no playable 4K preset.
FAQ
Q: Can this PC run Archeage at 1080p with high settings?
A: Yes. The measured average frame rate at 1920x1080 with High settings is 82 FPS, which is well above the 60 FPS playable threshold. The Ultra preset drops to 56 FPS, so High is the best choice for a smooth experience.
Q: What is the best resolution for this combo in Archeage?
A: The best resolution is 1920x1080, where the High preset delivers 82 FPS. At 2560x1440, the Medium preset runs at 81 FPS, which is also playable, but 4K is not viable since no preset reaches 60 FPS.
Q: Is the CPU or GPU more important for this game?
A: The GPU is the limiting factor at higher resolutions. At 1080p, frame rates scale with GPU load across presets, while at 4K, the GPU cannot keep up even on Low settings. The CPU’s performance is sufficient, as indicated by its mid-range benchmark scores, but the data does not show CPU-specific bottlenecks.
Q: How does the RTX 5050 compare to the RX 5600 XT in this game?
A: The RX 5600 XT has an average benchmark score that is 1.6% lower than the RTX 5050. This translates to nearly identical frame rates in Archeage, so you would expect the same playable settings at each resolution.
Q: What frame rate can I expect at 1440p with Medium settings?
A: The measured average frame rate at 2560x1440 with Medium settings is 81 FPS, with a minimum of 69 FPS and a maximum of 93 FPS. This is comfortably above the 60 FPS threshold.
Q: Is 4K playable with any settings?
A: No. The highest average frame rate at 3840x2160 is 52 FPS on Low settings, which is below the 60 FPS playable threshold. Medium runs at 47 FPS, High at 32 FPS, and Ultra at 22 FPS, so none are playable.
The Verdict
This PC can run Archeage, but only at specific resolutions and settings. At 1920x1080, the system clears the 60 FPS threshold with High settings, achieving 82 FPS on average. This is the recommended configuration for a smooth and visually pleasing experience. The Ultra preset at 1080p falls short at 56 FPS, so it is best avoided unless you prioritize visuals over frame rate.
At 2560x1440, the combo remains playable with Medium settings, delivering 81 FPS on average. Low settings also work at 91 FPS, but Medium offers a better balance of quality and performance. High and Ultra presets at 1440p drop to 55 FPS and 38 FPS, respectively, so they are not recommended for a 60 FPS target.
At 3840x2160, the system cannot achieve playable frame rates at any preset. The best result is 52 FPS on Low, which is below the threshold, and all other presets are significantly worse. If you plan to play at 4K, this hardware is insufficient for Archeage.
In summary, the Intel Core i5-10400F and RTX 5050 combo is a solid 1080p gaming setup for Archeage, with acceptable 1440p performance if you stick to Medium settings. For 4K, you would need a more powerful GPU. The data indicates that this pairing ranks in the lower half of all tested combos, primarily due to its 4K limitations, but for the vast majority of players using 1080p or 1440p monitors, it delivers a playable experience.