Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 68 | 101 | 117 |
| 1440p QHD | 81 | 121 | 142 | 149 |
| 1080p Full HD | 119 | 138 | 162 | 169 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Measured FPS Breakdown
The recorded data for Archeage with the Intel Core i5-10400F and NVIDIA GeForce RTX 4090 combination shows a wide spread of performance across resolutions and presets. At 1920x1080, the lowest preset delivers an average of 169.4 FPS, while the Medium preset reaches 162.4 FPS, High lands at 137.9 FPS, and Ultra remains comfortably high at 119.2 FPS. The gap between Low and Ultra at this resolution is substantial, roughly 50 FPS, indicating that the Ultra preset imposes a meaningful load even at the smallest tested resolution.
Moving to 2560x1440, the pattern shifts. Low produces 149.1 FPS, Medium comes in at 141.6 FPS, High drops to 120.7 FPS, and Ultra settles at 81.4 FPS. The drop from High to Ultra is particularly steep, a decline of nearly 40 FPS, which suggests that the Ultra preset at this resolution is where the system begins to feel noticeable pressure. Still, every setting at 1440p clears the 60 FPS threshold by a wide margin.
At 3840x2160, the situation changes more dramatically. Low runs at 117.1 FPS, Medium at 101.3 FPS, and High at 68.4 FPS. Ultra, however, falls to 48.3 FPS, which is below the playable threshold of 60 FPS. This is the only resolution and preset combination in the measured data that fails to maintain smooth gameplay. The scaling from Medium to High at 4K costs roughly 33 FPS, and the jump from High to Ultra costs another 20 FPS, showing that the Ultra preset at 4K is simply too demanding for this pairing. No minimum or maximum FPS values were recorded for any configuration, so the analysis relies entirely on average FPS figures.
CPU and GPU Roles
The benchmark results indicate that the RTX 4090 is the dominant component in most scenarios, but the i5-10400F still exerts a measurable influence, particularly at lower resolutions. At 1920x1080, the difference between Low and Ultra is about 50 FPS, which demonstrates that the GPU is being pushed harder as settings increase, but the CPU remains capable enough to feed the card at all presets. The fact that Ultra at 1080p still achieves 119.2 FPS suggests that the CPU does not become a bottleneck until very high frame rates, and even then it does not drag performance below playable levels.
At 2560x1440, the scaling between presets widens. Low to Ultra spans roughly 68 FPS, with the largest single drop occurring between High and Ultra. This indicates that the GPU is taking on more work as resolution increases, while the CPU's role becomes relatively smaller. The i5-10400F, with its 6 cores and 12 threads, appears sufficient to keep the RTX 4090 fed at this resolution, as even the most demanding preset stays at 81.4 FPS.
At 3840x2160, the GPU role becomes even more pronounced. The gap between Low and Ultra is nearly 69 FPS, and the Ultra preset falls below 60 FPS. This is a clear sign that the RTX 4090 is the limiting factor at 4K Ultra, not the CPU. The i5-10400F has enough headroom to push the GPU to its limits at this resolution, but the GPU itself cannot handle the combined load of 4K resolution and Ultra settings in this game. The data suggests that for players targeting 4K, the CPU is not the constraint; rather, the GPU's raw throughput is what determines whether a given preset is playable.
Similar Performance Alternatives
Looking at the nearest rivals in the database, the Intel Core i5-10400F sits very close to several other processors in average benchmark score. The Intel Xeon 6756E scores 14163, which is 0.2% higher than the i5-10400F's 14185 average. The Intel Core 7 160UL is 0.3% lower at 14232, meaning it would perform nearly identically in this game. The AMD EPYC 7552 trails by 0.5% with a score of 14115, and the AMD Ryzen 3 7320C is 0.6% behind at 14277. These deltas are all within a single percentage point, so any of these CPUs would deliver essentially the same frame rates in Archeage when paired with the RTX 4090. The practical takeaway is that the i5-10400F is not uniquely positioned; many server and mobile-class processors from both Intel and AMD fall into the same performance band.
For the GPU side, the NVIDIA GeForce RTX 4090 has an average benchmark score of 60347. The Intel Arc Pro A60 matches it almost exactly with a score of 60326 and a delta of 0%. The AMD Radeon Pro Vega 48 is 0.3% higher at 60140, while the AMD Radeon Pro W6600M is 2.5% lower at 61896, and the AMD Radeon PRO V710 trails by 2.9% at 58657. These are professional-grade cards, but the data shows that they would produce very similar frame rates in this game. A player with an Arc Pro A60 or a Radeon Pro Vega 48 would likely see nearly identical performance to the RTX 4090 in Archeage, based on the recorded averages. The RTX 4090 does hold a slight edge in raw benchmark scores, but the margins are small enough that real-world gameplay differences would be minimal.
The Verdict
The verdict by resolution is clear from the measured data. At 1920x1080, every preset is playable, with Ultra achieving 119.2 FPS, which is nearly double the 60 FPS threshold. At 2560x1440, all four presets also clear the bar, with Ultra at 81.4 FPS and High at 120.7 FPS. At 3840x2160, the system can run Low, Medium, and High at playable frame rates, with High delivering 68.4 FPS. However, Ultra at 4K fails to reach 60 FPS, averaging only 48.3 FPS.
In practical terms, this PC can run Archeage at 1080p and 1440p with maximum settings without issue. At 4K, players should stick to High or lower to maintain smooth performance. The best playable setting at 4K is High, which still provides 68.4 FPS, leaving some headroom above the threshold. The data does not support 4K Ultra as a viable option for this combination, as it falls roughly 12 FPS short of the playable mark.
How This Combo Ranks
The combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 4090 ranks 568 out of 3708 tested combos in the database for Archeage. This places it in the top 15% of all tested systems, which is a strong showing. The high rank is driven primarily by the RTX 4090's exceptional performance, as the GPU alone sits in the 88th percentile among all GPUs. The CPU is less impressive, ranking in the 68th percentile among all CPUs, but it does not drag the overall combo down significantly. The rank of 568 indicates that while many systems outperform this pairing, the vast majority of tested combinations fall below it. For a game like Archeage, which is an MMORPG with potentially large player counts and complex scenes, this rank suggests the system will handle most content with ease, though it may not be the absolute top performer in the database.
FAQ
Q: Can this PC run Archeage at 1080p with Ultra settings?
A: Yes, the recorded average FPS at 1920x1080 with Ultra settings is 119.2 FPS, well above the 60 FPS playable threshold.
Q: Is 4K Ultra playable with this combination?
A: No, the average FPS at 3840x2160 with Ultra settings is 48.3 FPS, which falls below the 60 FPS threshold. Players should use High settings at 4K instead, which delivers 68.4 FPS.
Q: What is the best preset at 2560x1440?
A: Ultra is the best playable preset at 2560x1440, with an average FPS of 81.4. All other presets also clear 60 FPS, but Ultra offers the highest visual quality.
Q: How does the RTX 4090 compare to its nearest rivals in this game?
A: The RTX 4090 has an average benchmark score of 60347. The Intel Arc Pro A60 scores 60326 (0% delta), the AMD Radeon Pro Vega 48 scores 60140 (0.3% delta), and the AMD Radeon Pro W6600M scores 61896 (2.5% delta). Performance differences are minimal.
Q: Does the i5-10400F bottleneck the RTX 4090 in Archeage?
A: The data suggests the CPU does not bottleneck at 1080p or 1440p, as even Ultra settings at these resolutions exceed 80 FPS. At 4K, the GPU becomes the limiting factor, especially at Ultra settings where FPS drops below 60.
Q: How many tested combos does this system rank above?
A: This combo ranks 568 out of 3708 tested combinations, meaning it outperforms roughly 3140 other systems in the database for Archeage.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 119.2 FPS. This is the highest visual quality available, and it still leaves substantial headroom above the playable threshold.
At 2560x1440, Ultra is again the best choice, delivering 81.4 FPS. This is comfortably above 60 FPS, though the margin is smaller than at 1080p. Players who prefer higher frame rates could drop to High for 120.7 FPS, but Ultra remains playable.
At 3840x2160, the best playable preset is High, which averages 68.4 FPS. Ultra is not playable at this resolution, with 48.3 FPS, so High represents the optimal balance of visual quality and performance. Low and Medium also work, at 117.1 FPS and 101.3 FPS respectively, but High offers the best visual experience while still clearing the 60 FPS bar.