Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

47%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
153 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
103 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
59 FPS
Ultra 4K Measured
24 FPS
10.9ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 14,185
Graphics Card
Required 28,463
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 36 52 59
1440p QHD 42 62 91 103
1080p Full HD 63 92 136 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 92
1920x1080 Low 153
1920x1080 Medium 136
1920x1080 Ultra 63
2560x1440 High 62
2560x1440 Low 103
2560x1440 Medium 91
2560x1440 Ultra 42
3840x2160 High 36
3840x2160 Low 59
3840x2160 Medium 52
3840x2160 Ultra 24

Performance Analysis: Archeage on Your System

Similar Performance Alternatives

The Intel Core i5-10400F sits in a tight cluster of processors with nearly identical average benchmark scores. The AMD EPYC 7552 is 0.5% ahead, the Intel Xeon 6756E is 0.2% ahead, while the Intel Core 7 160UL trails by 0.3% and the AMD Ryzen 3 7320C by 0.6%. In practical terms, any of these CPUs would deliver indistinguishable frame rates in Archeage, though the Xeon and EPYC parts are server platforms with different platform costs. The i5-10400F's 68th percentile ranking among all CPUs means it sits above most desktop processors, but the closest rivals show that this performance tier is densely populated. For gaming specifically, the Comet Lake architecture's single-thread performance, shown in the 3DMark single-thread score of 688 and Geekbench single-core score of 1420, is what drives MMO performance, and the nearest rivals all land within a fraction of a percent.

On the GPU side, the RTX 4060's nearest rivals are surprising: the AMD Radeon HD 7790 (0.2% lower), AMD Radeon 780M (0.3% higher), AMD Radeon Pro 560 (0.5% higher), and AMD Radeon Pro 460 (0.7% higher). The RTX 4060's 61st percentile among all GPUs places it mid-pack, and the delta percentages indicate that a Radeon 780M integrated solution or an older Radeon Pro workstation card would produce nearly identical frame rates in this title. This is unusual, as the RTX 4060 carries modern Ada Lovelace architecture with hardware ray tracing and DLSS support, but Archeage is an older MMORPG that does not heavily utilize those features. The benchmark data shows that raw rasterization throughput, not feature set, determines performance here.

For a builder considering alternatives, the data suggests that pairing the i5-10400F with any of these rival GPUs would yield within 1% of the same experience. The AMD Radeon 780M is particularly notable because it is an integrated GPU, meaning a system without a discrete graphics card could match the RTX 4060 in this specific game. Conversely, the CPU alternatives are all within 0.6% of the i5-10400F, so users upgrading from any of those platforms would see no measurable difference in Archeage performance.

CPU and GPU Roles

The measured FPS data across resolutions reveals how the CPU and GPU divide responsibility in Archeage. At 1920x1080, the RTX 4060 is not the limiting factor. The Low preset runs at 153 FPS, Medium at 136 FPS, High at 92 FPS, and Ultra at 63 FPS. The drop from Low to Medium is 17 FPS, from Medium to High is 44 FPS, and from High to Ultra is 29 FPS. This scaling pattern shows that graphical settings have a strong impact, but even at Ultra, the system clears 60 FPS. The CPU's multithreaded performance, reflected in the Cinebench R23 multi-core score of 10283 and PassMark multithread score of 12115, is sufficient to feed the GPU at 1080p.

Moving to 2560x1440, the frame rates drop noticeably. Low runs at 103 FPS, Medium at 91 FPS, High at 62 FPS, and Ultra falls to 42 FPS. The High preset barely clears the 60 FPS threshold, and Ultra does not. The scaling from 1080p to 1440p at the same settings shows a 33% drop for Low (153 to 103), 33% for Medium (136 to 91), 33% for High (92 to 62), and 33% for Ultra (63 to 42). This consistent one-third reduction across all presets indicates that the GPU is now the primary constraint. The RTX 4060's 8 GB GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth becomes the bottleneck as pixel count rises.

At 3840x2160, the GPU is clearly the dominant factor. Low preset runs at 59 FPS, just under the playable threshold, Medium at 52 FPS, High at 36 FPS, and Ultra at 24 FPS. The scaling from 1440p to 4K shows further drops: 43% for Low (103 to 59), 43% for Medium (91 to 52), 42% for High (62 to 36), and 43% for Ultra (42 to 24). The consistent percentage drops again point to GPU-bound rendering. The CPU's role diminishes as resolution increases because the frame rate is limited by pixel throughput, not by draw calls or physics calculations. In Archeage, which is an MMORPG with many concurrent players and effects, the CPU matters most at 1080p where the GPU has headroom, but at 4K the RTX 4060's 15.11 TFLOPS FP32 compute and 118.1 GPixel/s pixel rate are the deciding factors.

The Medium preset at 4K shows min FPS of 45 and max of 60, indicating frame time variance even when the average is 52. The 1440p Medium preset shows min 78 and max 105, a 27 FPS spread, while 1080p Medium shows min 115 and max 156, a 41 FPS spread. These ranges suggest that Archeage has moments of heavy load, likely in crowded areas or large-scale battles, where the CPU must process many entities simultaneously. The i5-10400F's 6 cores and 12 threads handle this adequately at lower resolutions, but the GPU cannot compensate at higher resolutions.

FAQ

Q: Can this system run Archeage at 4K?

A: No resolution at 4K clears the 60 FPS playable threshold. The best result is the Low preset at 59 FPS average, which is 1 FPS below playable. Medium runs at 52 FPS, High at 36 FPS, and Ultra at 24 FPS.

Q: What is the best preset at 1440p for this combination?

A: The High preset at 2560x1440 delivers 62 FPS average, which is the highest quality setting that stays above 60 FPS. Low runs at 103 FPS and Medium at 91 FPS, but High is the most demanding playable option.

Q: Is the CPU or GPU more important for Archeage at 1080p?

A: At 1920x1080, the GPU still has significant headroom, with Ultra running at 63 FPS. The CPU matters more here because the frame rates are high enough (153 FPS on Low) that the processor's single-thread performance, as shown by the 3DMark single-thread score of 688, becomes relevant for maintaining consistent frame times.

Q: How does the RTX 4060 compare to its nearest rival GPUs in this game?

A: The AMD Radeon HD 7790 scores 0.2% lower, the AMD Radeon 780M scores 0.3% higher, the AMD Radeon Pro 560 scores 0.5% higher, and the AMD Radeon Pro 460 scores 0.7% higher. All four would perform within 1% of the RTX 4060 in Archeage.

Q: What frame rates can I expect at 1080p with Medium settings?

A: The Medium preset at 1920x1080 averages 136 FPS, with minimum observed at 115 FPS and maximum at 156 FPS. This is well above the 60 FPS playable threshold and provides a smooth experience.

Q: Is the i5-10400F a bottleneck at any resolution?

A: The recorded data shows the system scales consistently by about 33% between resolutions, indicating GPU limitation at 1440p and 4K. At 1080p, the CPU has enough multithreaded capability, evidenced by the Cinebench R23 multi-core score of 10283, to avoid bottlenecking the GPU.

The Verdict

This combination can run Archeage at 1080p and 1440p, but not at 4K. At 1920x1080, all four presets clear the 60 FPS playable threshold: Low at 153 FPS, Medium at 136 FPS, High at 92 FPS, and Ultra at 63 FPS. The Ultra preset is playable but leaves only 3 FPS of headroom, so frame drops in busy areas could push it below 60. At 2560x1440, the High, Medium, and Low presets are playable, with High averaging 62 FPS, Medium at 91 FPS, and Low at 103 FPS. The Ultra preset at 42 FPS is not playable. At 3840x2160, no preset reaches the threshold. The Low preset at 59 FPS just misses, Medium at 52 FPS, High at 36 FPS, and Ultra at 24 FPS.

The verdict data records no playable settings at 4K, lists High, Low, and Medium as playable at 1440p with High as the best option at 62 FPS, and lists all four presets as playable at 1080p with Ultra as the best at 63 FPS. For a smooth experience, 1080p Ultra is technically viable, but 1440p High offers a better balance of image quality and frame rate stability. The 62 FPS at 1440p High leaves minimal room for the frame time spikes seen in the Medium preset's min/max range, so users sensitive to stutter may prefer 1080p Ultra or 1080p High.

Best Settings per Resolution

At 3840x2160, the data records no playable settings because even the Low preset at 59 FPS falls short of the 60 FPS threshold. The best setting is null, with no average FPS recorded at a playable level. Users attempting 4K must accept sub-60 performance or reduce resolution.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is High, with an average of 62 FPS. Low runs at 103 FPS and Medium at 91 FPS, but High delivers the best visual quality while keeping the average above the playable line. The 62 FPS average is close to the threshold, so monitoring during heavy combat is advisable. Medium at 91 FPS provides a safer margin with a 78 FPS minimum, while High has no recorded minimum, meaning frame drops are unquantified but could dip below 60.

At 1920x1080, the most demanding preset that maintains 60 FPS is Ultra, averaging 63 FPS. This is the highest quality option and it just clears the threshold. For users who prioritize stability over maximum quality, High at 92 FPS or Medium at 136 FPS offer substantial headroom. The Medium preset's minimum of 115 FPS shows that even in demanding scenes, this combination holds well above playable levels. Ultra has no recorded minimum, but the 63 FPS average is within 5% of the threshold, so frame time spikes could occasionally cause dips below 60 in densely populated areas.

How This Combo Ranks

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 4060 ranks 2001st out of 3708 tested combinations in Archeage. This places the combo in the 46th percentile of all tested systems, meaning roughly 54% of tested hardware combinations perform better in this game. The rank reflects the RTX 4060's mid-pack GPU standing (61st percentile among all GPUs) and the i5-10400F's 68th percentile CPU score. The combination is not a top-tier performer, but it is far from the bottom of the field.

The position suggests that while this is a mainstream setup, Archeage's performance demands favor higher-end GPUs at 4K. The 1080p results are strong, with Ultra at 63 FPS, but the 4K results drag the overall ranking down because no playable settings exist at that resolution. The 3708 total combos include many systems with more powerful GPUs that can handle 4K, and the RTX 4060's 61st percentile ranking among GPUs indicates it is below the median in the broader GPU landscape. The CPU's relatively strong 68th percentile does not compensate for the GPU's limitations at high resolutions.

For a builder, this rank means the system is suitable for 1080p gaming at maximum settings and 1440p at high settings, but it is not a high-resolution powerhouse. The 2001st rank out of 3708 is a realistic indicator: this is a competent mid-range gaming rig, not a top-tier one. Users who primarily play at 1080p will find the performance satisfying, while those targeting 4K should look at higher-ranked combinations in the database.