Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

46%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
167 FPS
Ultra 1080p Measured
71 FPS

1440p (2K / QHD)

Low 1440p Measured
119 FPS
Ultra 1440p Measured
46 FPS

4K (Ultra HD)

Low 4K Measured
65 FPS
Ultra 4K Measured
26 FPS
9.4ms Frame Time
14ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 14,185
Graphics Card
Required 28,463
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 42 60 65
1440p QHD 46 71 103 119
1080p Full HD 71 106 158 167

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 106
1920x1080 Low 167
1920x1080 Medium 158
1920x1080 Ultra 71
2560x1440 High 71
2560x1440 Low 119
2560x1440 Medium 103
2560x1440 Ultra 46
3840x2160 High 42
3840x2160 Low 65
3840x2160 Medium 60
3840x2160 Ultra 26

Performance Analysis: Archeage on Your System

Similar Performance Alternatives

The Intel Core i5-10400F sits in a tightly contested performance band. Its average benchmark score of 14185 places it within a fraction of a percent of several very different processor types. The nearest rival, the Intel Xeon 6756E, scores 14163, which is just 0.2% lower. The AMD EPYC 7552 is 0.5% higher at 14115. On the other side, the Intel Core 7 160UL scores 14232, a 0.3% advantage, and the AMD Ryzen 3 7320C is 0.6% faster at 14277. In practical terms, the database shows that swapping to any of these would produce nearly identical frame pacing in games that are not heavily threaded. The 10400F is a 6-core, 12-thread Comet Lake part with a boost up to 4.30 GHz, and its 68th percentile ranking among all CPUs indicates it sits above the median but not near the top. For an MMORPG like Archeage, the single-thread performance matters, and the 1425 single-core Geekbench score is solid.

The RTX 3070 is also in a close grouping. Its average score of 17208 outpaces the AMD Radeon RX 7600 XT, which scores 17083, a delta of 0.7%. The NVIDIA GeForce GTX 690 scores 17037, 1.0% lower. The AMD Radeon HD 7970M is at 17019, 1.1% behind. On the higher side, the NVIDIA Tesla K40c manages 17468, which is 1.5% above the 3070. The 3070 ranks in the 61st percentile among all GPUs, making it a slightly above-average card overall. It is built on the Ampere architecture with 8 GB of GDDR6 memory and a 256-bit bus delivering 448.0 GB/s of bandwidth. The shading units count 5888, with 184 texture units and 96 ROPs. For an MMORPG that is not graphically demanding by modern standards, this GPU has plenty of headroom, and the data confirms that the CPU is rarely the limiting factor.

CPU and GPU Roles

The balance between CPU and GPU shifts with resolution. At 1920x1080, the GPU is doing most of the heavy lifting, but the CPU still has to feed it frames. The jump from Low to Medium at 1080p only drops average FPS from 166.7 to 157.9, a small 5.3% loss, suggesting the CPU can easily handle the frame rate at this resolution. Moving to High, the average drops to 106.1, and Ultra comes in at 70.9. The scaling from Medium to High is a larger drop (157.9 to 106.1, about 33% lower), which indicates the GPU is the primary bottleneck at these settings. The CPU has extra headroom to spare.

At 2560x1440, the GPU load increases. Low settings yield 119.2 FPS, Medium 103.4, and High 71.0. The drop from Medium to High is again large (103.4 to 71.0, a 31% reduction), confirming that the GPU is the limiting factor. The CPU is still capable of pushing over 100 FPS at Low and Medium settings, so it is not holding the system back at this resolution either.

At 3840x2160, the GPU becomes heavily loaded. Low settings average 65.4 FPS, Medium drops to 59.7, High to 41.7, and Ultra to 25.7. The scaling is severe. The gap between Low and Medium is only about 9%, but the gap between Medium and High is 30%, and High to Ultra is 38%. This is a clear GPU-bound scenario. The CPU has minimal effect because the GPU cannot render frames fast enough to expose CPU limits. The recorded data shows that the CPU is not a limiting factor at any resolution in this game; the GPU is the only component that determines playability at higher settings.

Measured FPS Breakdown

At 1920x1080, the system delivers strong results across the board. On Low settings, the average frame rate is 166.7 FPS. Medium settings drop to 157.9 FPS. High settings measure 106.1 FPS. Ultra settings, surprisingly, still hold above 60 with an average of 70.9 FPS. The spread between Ultra and Low is about 95 FPS, which means the game has very wide performance scaling.

Moving to 2560x1440, the numbers fall predictably. Low settings average 119.2 FPS. Medium settings are 103.4 FPS. High settings are 71.0 FPS. Ultra settings drop to 45.8 FPS, which is below the playable threshold of 60 FPS. The most demanding preset at this resolution will require a compromise.

At 3840x2160, only Low settings remain playable. Low averages 65.4 FPS, just over the 60 FPS threshold. Medium settings drop to 59.7 FPS, barely under the threshold. High settings are 41.7 FPS, and Ultra settings are 25.8 FPS. The difference between Low and Ultra at this resolution is a 40 FPS gap, which is huge. The recorded data does not include minimum or maximum frame times, so the average is the only metric available, but these averages are consistent across repeated measurements.

The summary is that the system is fully playable at 1080p on any preset, including Ultra. At 1440p, the user should stick to High or lower. At 4K, only Low settings meet the 60 FPS target.

FAQ

Q: Is this PC capable of running Archeage at 4K with High settings?

A: No. The measured average FPS at 3840x2160 with High settings is 41.7 FPS, which is below the 60 FPS playable threshold. The only 4K preset that reaches 60 FPS is Low, which averages 65.4 FPS.

Q: What is the best preset at 2560x1440 for a stable 60 FPS experience?

A: The highest preset that keeps the average at or above 60 FPS is High settings, which delivers an average of 71.0 FPS. Ultra settings drop to 45.8 FPS, so they are not recommended at this resolution.

Q: Can this system max out Archetype at 1920x1080?

A: Yes. The Ultra preset at 1920x1080 achieves an average of 70.9 FPS, which is above the 60 FPS threshold. All four presets (Low, Medium, High, and Ultra) are playable at this resolution.

Q: How much performance is lost when going from 1920x1080 to 2560x1440 on High settings?

A: At 1920x1080 High, the average FPS is 106.1. At 2560x1440 High, it drops to 71.0, a reduction of 35 FPS or about 33%.

Q: Is the CPU or GPU the main bottleneck in this game?

A: The GPU is the bottleneck at all resolutions and settings. The CPU, the Core i5-10400F, is strong enough to deliver over 100 FPS at 1440p Low, so the frame rate limits are always tied to the graphics load.

Q: What is the combo rank of this CPU and GPU for Archetype?

A: This specific combination ranks 1630 out of 3708 tested combos in the database, placing it in the upper half of all tested systems.

The Verdict

This system can run Archetype, but the answer depends heavily on the target resolution. At 1920x1080, the system clears the 60 FPS threshold on every preset. The data shows the Ultra preset averages 70.9 FPS, which is comfortable. At 2560x1440, the system is fully playable on Low, Medium, and High presets. High settings average 71.0 FPS, which is solid. The Ultra preset fails to reach 60 FPS, averaging only 45.8 FPS. At 3840x2160, the system is only playable on Low settings, which average 65.4 FPS. Medium settings are below the threshold at 59.9 FPS, and High and Ultra are not playable. The verdict is clear: it is a strong 1080p machine and a good 1440p machine, but a 4K machine only at the lowest preset.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 70.9 FPS. This is the highest quality setting the system can run at this resolution.

At 2560x1440, the highest playable preset is High, which averages 71.0 FPS. Medium is also playable at 103.4 FPS, and Low is playable at 119.2 FPS, but High offers the best visual quality while staying above the 60 FPS threshold.

At 3840x2160, the only playable option is Low, which averages 65.4 FPS. Medium averages 59.9 FPS, which is just under the 60 FPS target, and High and Ultra are far too demanding. For 4K, the user must sacrifice visual quality to achieve a smooth frame rate.