Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 19 | 27 | 40 | 45 |
| 1440p QHD | 33 | 48 | 70 | 79 |
| 1080p Full HD | 48 | 71 | 104 | 117 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Intel Core i5-10400F paired with NVIDIA GeForce RTX 2060 delivers a playable Archeage experience at 1080p and 1440p, but 4K Ultra remains out of reach. The recorded data shows this combination sits at rank 2928 out of 3708 tested combos for this game, placing it in the lower-middle tier for MMORPG performance. With a playable threshold of 60 FPS, the system clears that bar at 1920x1080 on High settings and 2560x1440 on Medium settings, while 3840x2160 has no playable configuration.
Measured FPS Breakdown
At 1920x1080, the system performs best on Low settings with an average of 117 FPS. Medium settings drop the average to 104 FPS, with recorded minimums of 89 FPS and maximums of 120 FPS. High settings still clear the 60 FPS threshold at 71 FPS average, but Ultra settings fall to 48 FPS average, which is below the playable mark. The gap between Low and Ultra is substantial, a 69 FPS difference, indicating that the GPU is heavily taxed by the highest preset even at the most common resolution.
Moving to 2560x1440, the same pattern holds but with lower headroom. Low settings average 79 FPS, which is comfortably above 60 FPS. Medium settings average 70 FPS, with a minimum of 60 FPS and a maximum of 81 FPS, meaning the frame rate never dips below the playable threshold. High settings fall to 48 FPS average, and Ultra drops to 33 FPS average. The drop from Low to High at 1440p is 31 FPS, while the drop from Medium to Ultra is 37 FPS, showing that the highest presets impose a severe penalty.
At 3840x2160, no settings achieve 60 FPS. Low settings average 45 FPS, Medium averages 40 FPS with a minimum of 34 FPS and a maximum of 46 FPS, High averages 27 FPS, and Ultra averages 19 FPS. The progression is consistent: each preset step up costs roughly 5 to 8 FPS at 4K, but even the most forgiving Low preset cannot reach playable levels. The minimum at Medium, 34 FPS, would be noticeable in crowded MMORPG scenes, and the maximum of 46 FPS still falls short of the target.
Resolution scaling from 1080p to 1440p at Medium settings results in a drop from 104 FPS to 70 FPS, a 34 FPS reduction. From 1440p to 2160p at Medium, the drop is from 70 FPS to 40 FPS, another 30 FPS reduction. This consistent penalty suggests the RTX 2060 is the primary limiter at higher resolutions, as the pixel count increase directly impacts the GPU workload.
Similar Performance Alternatives
The CPU benchmarks place the Intel Core i5-10400F with an average score of 14185, which is nearly identical to nearby rivals. The Intel Xeon 6756E scores 14163, a 0.2 percent difference, while the Intel Core 7 160UL scores 14232, a 0.3 percent difference in the opposite direction. The AMD EPYC 7552 scores 14115, 0.5 percent lower, and the AMD Ryzen 3 7320C scores 14277, 0.6 percent higher. For Archeage, any of these processors would deliver similar CPU-bound performance, meaning the game's frame rates would be nearly indistinguishable when paired with the same GPU.
The GPU side shows a tighter cluster. The NVIDIA GeForce RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 matches with 15283, a 0 percent delta. The AMD Radeon 680M scores 15270, 0.1 percent lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6 percent lower, and the AMD Radeon RX 7600 scores 15171, 0.8 percent lower. In practical terms, swapping the RTX 2060 for any of these cards would yield Archeage performance within a fraction of a percent, so the measured FPS numbers would remain effectively unchanged.
The CPU percentile of 68 means the i5-10400F outperforms 68 percent of all CPUs in the database, while the GPU percentile of 58 means the RTX 2060 outperforms 58 percent of all GPUs. For Archeage, the CPU is comparatively stronger, but the game's reliance on GPU rendering at high settings means the GPU becomes the bottleneck as resolution increases. Players with a GTX 580 or RX 7600, despite their older or newer architectures respectively, would see nearly identical frame rates in this title.
CPU and GPU Roles
At 1920x1080 Low settings, the CPU has the most influence because the GPU has less work per frame. The 117 FPS average suggests the i5-10400F can feed frames quickly, but the RTX 2060 still handles the rendering load. At the same resolution on Ultra, the average drops to 48 FPS, a 59 percent reduction from Low, which points to the GPU being overwhelmed by the increased shading and texture work. The CPU's 6 cores and 12 threads are sufficient for Archeage's MMORPG workloads, as the game does not show extreme multi-thread scaling in the recorded data.
Resolution scaling clarifies the GPU's role. From 1080p to 1440p at Medium, the FPS drops from 104 to 70, a 34 FPS loss. From 1440p to 2160p at Medium, the FPS drops from 70 to 40, a 30 FPS loss. If the CPU were the bottleneck, these losses would be smaller because the GPU would be waiting on the processor. The consistent 30 to 34 FPS penalty across resolution steps indicates the RTX 2060's 6 GB of GDDR6 memory and 192-bit bus are the limiting factors, not the CPU.
At 1080p, the CPU can keep up with the GPU's output, as evidenced by the 117 FPS Low result. At 4K, the GPU cannot maintain even 45 FPS on Low, while the CPU has headroom to spare. The difference between Low and Ultra at 1080p is 69 FPS, while at 4K the difference is 26 FPS. This narrowing gap at 4K shows that the GPU is already saturated even on Low settings, so preset changes have less relative impact. The i5-10400F's 3dmark single-thread score of 688 and cinebench r23 single-core score of 1451 indicate adequate per-core performance for MMO logic, but the game's visual effects scale primarily with GPU capability.
FAQ
Q: Can this PC run Archeage at 60 FPS on a 1080p monitor?
A: Yes, the recorded data shows 1920x1080 High settings average 71 FPS, Medium averages 104 FPS, and Low averages 117 FPS. All three presets clear the 60 FPS threshold, though Ultra falls short at 48 FPS.
Q: What is the highest setting that maintains 60 FPS at 1440p?
A: Medium settings at 2560x1440 average 70 FPS with a minimum of 60 FPS and a maximum of 81 FPS. Low settings average 79 FPS, but High drops to 48 FPS, so Medium is the most demanding playable preset.
Q: Is 4K gaming possible with this hardware?
A: No, the data shows no playable settings at 3840x2160. Low averages 45 FPS, Medium averages 40 FPS, High averages 27 FPS, and Ultra averages 19 FPS, all below the 60 FPS threshold.
Q: How does the RTX 2060 compare to similar GPUs for Archeage?
A: The RTX 2060 scores 15290 on average benchmarks. The GTX 580 scores 15283, the Radeon 680M scores 15270, the RTX 3050 OEM scores 15199, and the RX 7600 scores 15171. All are within 0.8 percent, so frame rates would be nearly identical.
Q: Does the CPU bottleneck the GPU in this game?
A: At 1080p Low, the 117 FPS average suggests the CPU is not limiting. At higher resolutions, the GPU becomes the bottleneck, as shown by the 30 FPS loss from 1440p to 2160p at Medium settings, which aligns with GPU workload rather than CPU performance.
Q: What is the best resolution and settings combo for this system?
A: The verdict data indicates 1920x1080 High at 71 FPS is the best playable option, followed by 2560x1440 Medium at 70 FPS. For the smoothest experience, 1080p Medium at 104 FPS offers a large margin above the threshold.
The Verdict
This PC can run Archeage at 1920x1080 and 2560x1440, but not at 3840x2160. At 1080p, the playable settings are High, Low, and Medium, with High being the most demanding preset that clears 60 FPS at 71 FPS average. At 1440p, only Low and Medium are playable, with Medium averaging 70 FPS and a minimum of 60 FPS, which is right at the threshold. At 4K, the verdict is clear: no settings are playable, as even Low averages only 45 FPS.
The system's rank of 2928 out of 3708 combos for Archeage reflects that it is not a high-end setup for this title, but it is sufficient for mainstream resolutions. The 68th percentile CPU and 58th percentile GPU place this combination in the middle of the pack. Players should target 1080p High for the best balance of visual quality and frame rate, or 1440p Medium if they prefer higher resolution with slightly reduced settings. Avoid 4K entirely, as the GPU lacks the bandwidth and memory capacity to push the required pixel count.
Best Settings per Resolution
At 1920x1080, the best settings are High, which averages 71 FPS. This preset provides the most visual detail while staying above the 60 FPS threshold. Medium is faster at 104 FPS, but High offers better textures and effects without sacrificing playability. Ultra is not recommended because it drops to 48 FPS, which is below the playable mark.
At 2560x1440, the best settings are Medium, averaging 70 FPS with a minimum of 60 FPS. This is the only resolution where Medium remains playable, and it delivers a 70 FPS average that is just above the threshold. Low averages 79 FPS and is smoother, but Medium provides a noticeable visual upgrade for a modest FPS cost. High and Ultra are not viable at this resolution.
At 3840x2160, there are no recommended settings because no preset reaches 60 FPS. The closest is Low at 45 FPS, which would feel sluggish in combat. Players with a 4K monitor should either lower the display resolution to 1440p or accept sub-60 FPS performance with reduced settings. The data does not support any playable configuration at 4K for this hardware combination.