Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
229 FPS
Ultra 1080p Measured
134 FPS

1440p (2K / QHD)

Low 1440p Measured
200 FPS
Ultra 1440p Measured
90 FPS

4K (Ultra HD)

Low 4K Measured
125 FPS
Ultra 4K Measured
52 FPS
5.3ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 13,494
Graphics Card
Required 28,463
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 52 76 112 125
1440p QHD 90 132 192 200
1080p Full HD 134 190 220 229

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 190
1920x1080 Low 229
1920x1080 Medium 220
1920x1080 Ultra 134
2560x1440 High 132
2560x1440 Low 200
2560x1440 Medium 192
2560x1440 Ultra 90
3840x2160 High 76
3840x2160 Low 125
3840x2160 Medium 112
3840x2160 Ultra 52

Performance Analysis: Archeage on Your System

The Intel Core i3-12100F and NVIDIA GeForce RTX 5090 D combination delivers playable frame rates in Archeage at most settings, but the data shows a clear boundary at 4K Ultra. Measured results show the pair averages 134 FPS at 1080p Ultra, 90 FPS at 1440p Ultra, and 76 FPS at 4K High, while 4K Ultra falls to 52 FPS — below the 60 FPS threshold. The combo ranks 105th out of 3,708 tested configurations for this title. The CPU carries a launch MSRP of $97, and the GPU has a launch MSRP of $2,299.

Best Settings per Resolution

The most demanding preset that remains at or above 60 FPS differs by resolution.

  • 3840×2160 (4K): High is the best setting, averaging 76 FPS. Ultra averages only 52 FPS, so it is not playable. Medium averages 112 FPS and Low 125 FPS, but High offers the highest visual quality that still clears the threshold.
  • 2560×1440: Ultra is the best setting, averaging 90 FPS. All four presets — Low (200 FPS), Medium (192 FPS), High (132 FPS), and Ultra (90 FPS) — stay above 60 FPS, so the most demanding preset is Ultra.
  • 1920×1080: Ultra is also the best setting, averaging 134 FPS. Low reaches 229 FPS, Medium 220 FPS, and High 190 FPS. Every preset at this resolution comfortably exceeds the 60 FPS threshold.

The verdict is clear: for a 60 FPS floor, the system can handle Ultra at 1080p and 1440p, and High at 4K. The 4K Ultra preset is the only setting tested that fails to meet the playable threshold.

Similar Performance Alternatives

The nearest rival hardware for the CPU and GPU provides a useful reference for how other builds might behave in Archeage.

CPU: The Intel Core i3-12100F has an average benchmark score of 13,494. Its closest competitors, based on average scores, are:

  • Intel Core 3 N355 – average score 13,492, delta 0%
  • Intel Core i5-9500 – average score 13,452, delta +0.3%
  • Intel Core 5 120UL – average score 13,594, delta −0.7%
  • Intel Core i7-1250U – average score 13,351, delta +1.1%

All four rivals are within about one percent of the i3-12100F’s aggregate score, meaning frame rates in Archeage would be nearly indistinguishable with any of these processors. The CPU sits in the 68th percentile among all tested CPUs.

GPU: The NVIDIA GeForce RTX 5090 D posts an average benchmark score of 77,712. Its nearest rivals are:

  • AMD Radeon RX 6650M XT – average score 76,904, delta +1.1%
  • AMD Radeon RX 6850M XT – average score 78,940, delta −1.6%
  • NVIDIA Tesla P100 PCIe 12 GB – average score 79,396, delta −2.1%
  • NVIDIA Tesla P100 PCIe 16 GB – average score 79,605, delta −2.4%

The RTX 5090 D sits in the 92nd percentile of all GPUs. The delta values are all within a couple of percentage points, so any of these graphics cards would deliver similar Archeage frame rates at the same settings. The Tesla P100 variants score slightly higher overall, but the difference is under 2.5% — negligible in practice.

Measured FPS Breakdown

The complete measured frame-rate data for the i3-12100F + RTX 5090 D in Archeage is listed below. Average FPS is the headline metric; minimum and maximum values are provided where available.

| Resolution | Settings | Average FPS | Min FPS | Max FPS |

|------------|----------|-------------|---------|---------|

| 3840×2160 | High | 76 | – | – |

| 3840×2160 | Low | 125 | – | – |

| 3840×2160 | Medium | 112 | 95 | 128 |

| 3840×2160 | Ultra | 52 | – | – |

| 2560×1440 | High | 132 | – | – |

| 2560×1440 | Low | 200 | – | – |

| 2560×1440 | Medium | 192 | 164 | 221 |

| 2560×1440 | Ultra | 90 | – | – |

| 1920×1080 | High | 190 | – | – |

| 1920×1080 | Low | 229 | – | – |

| 1920×1080 | Medium | 220 | 187 | 253 |

| 1920×1080 | Ultra | 134 | – | – |

The only row below the 60 FPS threshold is 4K Ultra at 52 FPS. The next lowest is 4K High at 76 FPS, a comfortable margin. At 1440p, even Ultra keeps an average of 90 FPS, and at 1080p all presets exceed 134 FPS. The min/max data for Medium settings shows a spread of about 30–40 FPS, but the averages remain high.

The Verdict

Can this PC run Archeage? Yes, with a few caveats.

  • 3840×2160: The system is playable at High, Medium, and Low settings, with average FPS of 76, 112, and 125 respectively. Ultra is not playable at 52 FPS.
  • 2560×1440: Every preset is playable. The best setting is Ultra at 90 FPS, with High at 132, Medium at 192, and Low at 200.
  • 1920×1080: All four presets are playable, with Ultra delivering 134 FPS and the other presets ranging from 190 to 229 FPS.

The data shows that the 4K Ultra preset is the only configuration that fails the 60 FPS threshold. For 4K gaming, players should select High to stay above the playable line. At 1440p and below, the system has enough headroom to run the most demanding preset without issue.

CPU and GPU Roles

Understanding which component limits performance in Archeage requires looking at the scaling between resolutions and presets.

The FPS drops consistently as resolution increases at every preset. For example, at High settings, the average goes from 190 FPS at 1080p to 132 FPS at 1440p and 76 FPS at 4K. At Ultra, it goes from 134 FPS to 90 FPS to 52 FPS. This pattern — a near-halving of frame rate when moving from 1080p to 4K — is typical of a GPU‑bound workload. The CPU does not see a corresponding increase in load when resolution rises, so the GPU is the primary factor in the frame rate differences.

The GPU’s percentile ranking is significantly higher than the CPU’s: the RTX 5090 D sits at the 92nd percentile of all GPUs, while the i3-12100F is at the 68th percentile of all CPUs. This suggests that the CPU is the weaker relative component in the pairing, but the measured frame rates remain high because Archeage is not an exceptionally demanding title. At lower resolutions like 1080p, the CPU is more likely to become a limiting factor, but even then the system produces over 229 FPS on Low and 134 FPS on Ultra, so the CPU does not drag performance below the playable threshold.

The fact that the gap between Low and Ultra settings shrinks as resolution increases is also instructive. At 1080p, the spread is 229 − 134 = 95 FPS; at 4K, it is 125 − 52 = 73 FPS. This narrowing indicates that at 4K the GPU is so heavily loaded that even lowering the preset does not recover the same frame-rate headroom as it does at 1080p. In other words, the GPU becomes the dominant constraint at higher resolutions, while the CPU’s influence is more visible at lower resolutions.

The CPU’s single‑thread performance — a PassMark single‑thread score of 3,444 — is sufficient for the game’s logic, and the 4‑core/8‑thread configuration handles the multi‑threaded workload without issue. The GPU’s massive compute capability ( 104.8 TFLOPS FP32) and 32 GB GDDR7 memory ensure that the card is never short of memory bandwidth, even at 4K. Overall, the data indicates that the GPU is the more important component for achieving high frame rates in this game, particularly at 1440p and 4K, while the CPU provides a solid foundation for lower resolutions.

FAQ

Q: What is the best preset for 4K that stays above 60 FPS?

A: High settings, which average 76 FPS. Ultra drops to 52 FPS, which is below the 60 FPS threshold.

*Q: Can this system run Archeage at 1080p Ultra?*

A: Yes, it averages 134 FPS at 1080p Ultra, and all other 1080p presets exceed 190 FPS.

Q: How does the RTX 5090 D compare to its nearest rival, the RX 6650M XT?

A: The RTX 5090 D has an average benchmark score of 77,712, while the RX 6650M XT scores 76,904, a delta of +1.1% in favor of the NVIDIA card.

Q: What is the playable threshold used in this analysis?

A: The threshold is 60 FPS. The system clears this at every preset except 4K Ultra, which averages 52 FPS.

Q: What is the rank of this CPU/GPU combination among all tested combos in the game?

A: It ranks 105th out of 3,708 combinations.

Q: Does the CPU or GPU have a higher performance percentile?

A: The GPU is at the 92nd percentile of all GPUs, while the CPU is at the 68th percentile of all CPUs. The GPU is the stronger relative component.