Archeage

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3070 delivers a clear performance picture in Archeage, with measured FPS data showing a steep drop-off as resolution and settings increase. The combination is firmly capable at 1080p and 1440p, but 4K gaming requires significant compromises on visual quality to stay playable. This analysis breaks down the exact measured frame rates, identifies the optimal settings for each resolution, and contextualizes the results against comparable hardware.

Measured FPS Breakdown

The measured FPS data for Archeage covers three resolutions and four quality presets, with average frame rates recorded for each combination. Minimum and maximum FPS values are not available, so the analysis relies solely on average performance.

At 1920x1080, the Core i3-12100F and RTX 3070 combination performs strongly across all presets. Low settings produce an average of 176.6 FPS, Medium delivers 157.1 FPS, and High reaches 107.6 FPS. Even the most demanding Ultra preset maintains an average of 71.3 FPS, which is comfortably above the 60 FPS playability threshold. The scaling between presets is consistent: dropping from Low to Medium reduces performance by approximately 11%, while moving from Medium to High results in a 31.5% decrease. The jump from High to Ultra is the most severe, with a 33.7% reduction in average frame rate.

At 2560x1440, performance remains solid but the gap between presets widens. Low settings deliver an average of 119.6 FPS, Medium achieves 105.5 FPS, and High holds at 69 FPS. Ultra drops to 45.9 FPS, falling below the playable threshold. The difference between Low and Medium is modest at 11.8%, but the Medium-to-High transition costs 34.6% of performance. The High-to-Ultra step is even more punishing, with a 33.5% reduction, pushing the average below 60 FPS.

At 3840x2160, the RTX 3070 begins to struggle with the higher resolution demands. Low settings yield an average of 68.5 FPS, which just clears the playable threshold. Medium drops to 56.7 FPS, High falls to 42.2 FPS, and Ultra plummets to 25.3 FPS. The scaling at 4K is nonlinear: Low to Medium costs 17.2%, Medium to High costs 25.6%, and High to Ultra costs 40%. This indicates that the GPU is becoming the primary bottleneck at this resolution, particularly at higher quality settings.

Best Settings per Resolution

The playability threshold for Archeage is 60 FPS, and the measured data identifies the most demanding preset that maintains this level at each resolution.

At 1920x1080, all four presets clear 60 FPS, so the best settings are Ultra with an average of 71.3 FPS. This provides the highest visual quality while still maintaining a 18.8% margin above the playability threshold.

At 2560x1440, the High preset is the most demanding option that remains playable, delivering an average of 69 FPS. Ultra falls to 45.9 FPS, which is 23.5% below the threshold. Medium and Low also clear 60 FPS, but High offers the best visual quality without sacrificing playability.

At 3840x2160, only the Low preset is playable, with an average of 68.5 FPS. Medium falls to 56.7 FPS, which is 5.5% below the threshold. High and Ultra are significantly below 60 FPS, making them unsuitable for smooth gameplay. The data indicates that 4K gaming on this combination requires accepting minimal graphical settings.

Similar Performance Alternatives

The nearest rivals for the Intel Core i3-12100F, based on average benchmark scores, provide context for its performance in Archeage. The Intel Core 3 N355 has an average score of 13492, which is 0% different from the i3-12100F’s 13494 average. The Intel Core i5-9500 scores 13452, a 0.3% difference. The Intel Core 5 120UL scores 13594, which is 0.7% higher. The Intel Core i7-1250U scores 13351, 1.1% lower. These differences are negligible, meaning any of these CPUs would produce nearly identical frame rates in Archeage when paired with the same GPU.

For the NVIDIA GeForce RTX 3070, the nearest rivals show similar performance parity. The AMD Radeon RX 7600 XT has an average score of 17083, which is 0.7% lower than the RTX 3070’s 17208. The NVIDIA GeForce GTX 690 scores 17037, a 1% difference. The AMD Radeon HD 7970M scores 17019, 1.1% lower. The NVIDIA Tesla K40c scores 17468, 1.5% higher. These close scores suggest that swapping the RTX 3070 for any of these rivals would result in nearly identical FPS in Archeage, with differences well under 2%.

The combination of the i3-12100F with any of its nearest CPU rivals and the RTX 3070 with any of its nearest GPU rivals would produce essentially the same gameplay experience. The percentile rankings reinforce this: the CPU sits at the 68th percentile of all CPUs, while the GPU is at the 61st percentile of all GPUs. Neither component is an outlier in its performance class.

The Verdict

This PC can run Archeage at 1080p and 1440p, but 4K performance is limited to the lowest settings. At 1920x1080, the data shows all presets clear 60 FPS, with Ultra averaging 71.3 FPS. This makes the system fully capable of high-quality 1080p gaming with headroom above the playability threshold.

At 2560x1440, the High preset averages 69 FPS, which is playable, but Ultra drops to 45.9 FPS and is not recommended. The system handles 1440p well as long as settings stay at High or below. The 17.4% gap between High at 1440p and Ultra at 1080p illustrates the performance cost of higher resolution.

At 3840x2160, only Low settings maintain 60 FPS, averaging 68.5 FPS. Medium falls just short at 56.7 FPS, which is 5.5% below the threshold. High and Ultra are far too demanding, with averages of 42.2 FPS and 25.3 FPS respectively. The system is technically capable of 4K gaming, but only at minimal settings, which may not provide a satisfactory visual experience for most users.

The combination ranks 1559th out of 3708 tested combos for Archeage, placing it in the 42nd percentile of all combinations. This suggests that while the system is not top-tier for this game, it outperforms a majority of tested hardware configurations.

FAQ

Q: Can this PC run Archeage at Ultra settings?

A: Yes, but only at 1920x1080. Ultra settings average 71.3 FPS at 1080p, which clears the 60 FPS threshold. At 2560x1440, Ultra averages 45.9 FPS and is not playable, while at 3840x2160, Ultra averages 25.3 FPS.

Q: What is the best resolution for this system?

A: The data indicates 2560x1440 with High settings is the sweet spot, averaging 69 FPS. This offers a balance between visual quality and performance, with a 15% margin above the playability threshold. 1080p allows Ultra settings, but 1440p High provides a better overall experience.

Q: How much performance is lost when moving from 1080p to 1440p?

A: At High settings, the average FPS drops from 107.6 at 1080p to 69 at 1440p, a 35.9% reduction. At Low settings, the drop is from 176.6 to 119.6, a 32.3% reduction. The GPU becomes more stressed as resolution increases.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data suggests the GPU is the primary bottleneck at higher resolutions. At 4K, the difference between Low and Ultra is 63%, indicating heavy GPU load. At 1080p, the difference between Low and Ultra is 59.6%, showing that even at lower resolutions, GPU scaling dominates.

Q: What settings should be used for 4K gaming?

A: Only Low settings clear 60 FPS at 3840x2160, averaging 68.5 FPS. Medium falls to 56.7 FPS, which is below the playable threshold. Users wanting 4K must accept minimum visual quality.

Q: How does this system compare to other tested combinations?

A: The combo ranks 1559th out of 3708 tested combinations for Archeage. This places it in the upper half of tested systems, though it is not among the top performers. The CPU is at the 68th percentile of all CPUs, while the GPU is at the 61st percentile of all GPUs.

How This Combo Ranks

The Core i3-12100F and RTX 3070 combination ranks 1559th out of 3708 tested combos for Archeage. This places the system in the 42nd percentile of all tested combinations, meaning it outperforms roughly 58% of configurations tested for this game. The ranking indicates a mid-tier performance level, not exceptional but far from inadequate.

The rank reflects the balance between the CPU and GPU. The i3-12100F sits at the 68th percentile of all CPUs, while the RTX 3070 is at the 61st percentile of all GPUs. The combination performs slightly below what the individual component percentiles might suggest, indicating that Archeage is somewhat sensitive to the CPU’s 4-core/8-thread configuration at lower resolutions. The measured FPS data shows that at 1080p, the system achieves high frame rates, but the CPU’s limitations become more apparent at higher resolutions where GPU load increases.

The rank of 1559 out of 3708 is a useful reference point for users comparing this system to others. It suggests that while this combo is playable across most settings, there are 1558 tested combinations that perform better in Archeage. For users considering upgrades, the data indicates that improving either component would likely move the combination up the rankings.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU each contribute to performance in Archeage at different resolutions. At 1920x1080, the system achieves high frame rates across all settings, with Low averaging 176.6 FPS and Ultra averaging 71.3 FPS. The wide range suggests that the GPU is the primary driver of performance, as reducing settings significantly increases FPS. The CPU’s 4 cores and 8 threads are sufficient to feed the GPU at this resolution.

At 2560x1440, the scaling pattern shifts. Low settings average 119.6 FPS, while High drops to 69 FPS and Ultra falls to 45.9 FPS. The performance drop from Low to High is 42.3%, which is more severe than the 39.1% drop seen at 1080p. This indicates that the GPU is becoming more stressed at 1440p, but the CPU is still keeping up with the demand. The fact that Low settings still deliver 119.6 FPS at 1440p suggests the CPU is not the limiting factor here.

At 3840x2160, the GPU clearly dominates the performance profile. Low settings average 68.5 FPS, while Ultra drops to 25.3 FPS, a 63% reduction. The CPU’s role diminishes as resolution increases because the GPU must render more pixels per frame. The measured data shows that at 4K, the system is almost entirely GPU-bound, with the CPU having minimal impact on the final frame rate.

The resolution scaling also reveals that the CPU becomes less important at higher resolutions. At 1080p, the difference between Low and Ultra is 105.3 FPS, driven by GPU load. At 1440p, the difference is 73.7 FPS. At 4K, the difference is 43.2 FPS. This narrowing range indicates that the GPU’s workload increases with resolution, while the CPU’s contribution remains relatively constant. For Archeage, users with this combination should prioritize GPU settings when gaming at 1080p or 1440p, but at 4K, the GPU is the sole bottleneck and settings must be reduced accordingly.