Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 17 | 25 | 28 |
| 1440p QHD | 20 | 29 | 43 | 48 |
| 1080p Full HD | 29 | 43 | 64 | 71 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Measured FPS Breakdown
The measured performance for Archeage with the AMD Ryzen 9 9950X3D and Intel Arc B390 shows a heavily resolution-bound experience. At 3840x2160, the highest recorded average is 28 FPS on Low settings. High settings drop to 17 FPS, Medium sits at 25 FPS, and Ultra falls to 11 FPS. The only complete frame data at this resolution comes from Medium, where the minimum is 21 FPS and the maximum is 28 FPS. None of these figures approach the 60 FPS playable threshold.
At 2560x1440, results improve but remain below the playable mark across all presets. Low settings produce 48 FPS on average. Medium reaches 43 FPS with a minimum of 36 FPS and a maximum of 49 FPS. High settings yield 29 FPS, while Ultra drops to 20 FPS. The gap between Low and High at this resolution is 19 FPS, showing that preset selection has a substantial impact, yet even the least demanding preset cannot clear 60 FPS.
At 1920x1080, the combo finally crosses the 60 FPS line. Low settings average 71 FPS. Medium averages 64 FPS with a minimum of 54 FPS and a maximum of 73 FPS. High settings fall to 43 FPS, and Ultra drops to 29 FPS. The data indicates that the playable territory at 1080p is limited to Low and Medium, with Medium being the most demanding preset that stays above 60 FPS on average.
FAQ
Q: Can this system run Archeage at 60 FPS on a 4K display?
A: No. The database shows no playable settings at 3840x2160. The best average at that resolution is 28 FPS on Low, which is far below the 60 FPS threshold.
Q: What is the highest playable preset at 1920x1080?
A: Medium is the most demanding preset that stays at or above 60 FPS. It averages 64 FPS, with a recorded minimum of 54 FPS and a maximum of 73 FPS. Low also clears the threshold at 71 FPS.
Q: How does the Ultra preset compare to Medium at 1440p?
A: Ultra averages 20 FPS at 2560x1440, while Medium averages 43 FPS. That is a 23 FPS difference, indicating a severe performance cost for the highest preset at this resolution.
Q: Is there any resolution where the High preset is playable?
A: No. High settings average 17 FPS at 3840x2160, 29 FPS at 2560x1440, and 43 FPS at 1920x1080. None of these reach the 60 FPS playable threshold.
Q: What frame rate range can be expected in busy 1080p Medium gameplay?
A: The recorded data shows a minimum of 54 FPS and a maximum of 73 FPS at 1920x1080 Medium, with an average of 64 FPS. This means frame rates can dip below 60 during demanding moments.
Q: How does the 4K Medium result compare to 1080p Medium?
A: At 3840x2160 Medium, the average is 25 FPS. At 1920x1080 Medium, the average is 64 FPS. That is a 39 FPS improvement when moving down from 4K to 1080p at the same preset.
How This Combo Ranks
The database places this CPU and GPU combination at rank 3297 out of 3708 tested combos for Archeage. That puts this configuration in the bottom percentile of tested systems, roughly in the bottom eleventh of the recorded results. The ranking reflects the fundamental imbalance between the processor and the graphics solution in this pairing.
The AMD Ryzen 9 9950X3D is a top-tier processor. It sits in the 95th percentile against all CPUs in the database. Its average benchmark score of 75779 places it just ahead of the AMD Ryzen 7 PRO 9755, which scores 75738 with a delta of 0.1 percent. The Ryzen 7 PRO 9755X3D scores 75716, also 0.1 percent behind. The AMD EPYC 8224P follows at 75582 with a 0.3 percent delta, and the Intel Core Ultra 9 285 scores 75488 with a 0.4 percent delta. The processor is clearly not the limiting factor in this system.
The Intel Arc B390 tells a different story. Its average benchmark score is 1482, placing it in the 9th percentile against all GPUs. Its nearest rivals are the NVIDIA GeForce GT 520MX at 1463 with a 1.3 percent delta, the NVIDIA GeForce 800M at 1460 with a 1.5 percent delta, the NVIDIA GeForce GT 625 OEM at 1446 with a 2.5 percent delta, and the NVIDIA GeForce GT 710 at 1443 with a 2.7 percent delta. The GPU is the dominant constraint in this pairing, and the combo rank reflects that.
The rank of 3297 out of 3708 means that roughly 411 tested configurations perform worse in Archeage. That places this combo in the lower performance tier for this specific title, despite the processor's strength. The recorded data suggests that the GPU's limited throughput holds back the entire system, making the CPU's high scores largely irrelevant for this game's frame rates.
The Verdict
This PC cannot run Archeage at 60 FPS at 3840x2160 or 2560x1440 under any preset. The verdict data lists no playable settings for either resolution. At 4K, the best case is 28 FPS on Low, and at 1440p, the best case is 48 FPS on Low. Both fall short of the 60 FPS threshold by a wide margin.
At 1920x1080, the system clears the playable threshold with two presets. Low averages 71 FPS, and Medium averages 64 FPS. The database marks both Low and Medium as playable at this resolution. Medium is the best playable preset, with an average of 64 FPS.
For users targeting a smooth experience, 1080p is the only viable resolution, and even then, preset choice is restricted to Low or Medium. High and Ultra at 1080p produce 43 FPS and 29 FPS respectively, which are below the playable mark. The verdict is clear: this is a 1080p system for Archeage, and only at reduced settings.
CPU and GPU Roles
The scaling data between resolutions and presets reveals which component dominates Archeage performance for this combo. Moving from 3840x2160 to 2560x1440 at Medium settings improves the average from 25 FPS to 43 FPS, a gain of 18 FPS. Moving from 2560x1440 to 1920x1080 at Medium improves the average from 43 FPS to 64 FPS, a gain of 21 FPS. The consistent improvement as resolution drops indicates that the GPU is the primary bottleneck across all tested settings.
The preset scaling further confirms this. At 1920x1080, the difference between Low and Ultra is 42 FPS (71 FPS down to 29 FPS). At 2560x1440, the difference between Low and Ultra is 28 FPS (48 FPS down to 20 FPS). At 3840x2160, the difference between Low and Ultra is 17 FPS (28 FPS down to 11 FPS). The fact that preset changes have a larger absolute impact at lower resolutions suggests the GPU has more headroom at 1080p, but even at that resolution it is still the limiting factor.
The CPU's role is secondary here. The Ryzen 9 9950X3D has 16 cores, 32 threads, and a 128 MB L3 cache. Its benchmark results are exceptional, with a Cinebench R23 multi-core score of 42018 and a single-core score of 2259. This processor has far more compute capacity than Archeage requires. The recorded frame rates, however, are capped by the GPU's capabilities, not the CPU. The Intel Arc B390 has 1536 shading units, 48 texture mapping units, and 24 ROPs, with a boost clock of 2500 MHz and a pixel rate of 60.00 GPixel/s. Its 3DMark Steel Nomad DX12 score of 1482 places it in the 9th percentile, which is the decisive factor.
The data shows that the GPU becomes more dominant at higher resolutions, as expected, but it is also the limiting factor even at 1080p. The CPU is never the constraint in this configuration. Users upgrading this system would see the largest gains from replacing the graphics solution, not the processor.
Best Settings per Resolution
At 3840x2160, no preset reaches the 60 FPS playable threshold. The database records no playable settings and no best preset for this resolution. The closest option is Low at 28 FPS, which remains far below the target.
At 2560x1440, the same situation applies. No preset reaches 60 FPS, and the database lists no playable settings. Low at 48 FPS is the highest average recorded, but it is still 12 FPS short of the threshold.
At 1920x1080, the best playable preset is Medium. The recorded average is 64 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. This is the most demanding preset that stays at or above 60 FPS on average. Low also qualifies at 71 FPS, but Medium delivers higher visual quality while still clearing the average threshold. Users should note that the minimum of 54 FPS means some scenes will drop below 60 FPS, even though the average remains playable.