Archeage

The AMD Ryzen 9 5950X paired with the Intel Arc B580 delivers a solid 1080p and 1440p experience in Archeage, but it falls short of the 60 FPS threshold at 4K across all tested settings. At 1080p, the combo achieves playable frame rates on High, Medium, and Low presets, with the Ultra preset landing just below the line. At 1440p, Low and Medium settings remain playable, while at 4K, no preset reaches the 60 FPS target. Benchmark data confirms this system is best suited for high-refresh 1080p gaming or medium-settings 1440p.

Measured FPS Breakdown

The measured frame rates in Archeage show a clear scaling pattern across resolutions and settings. At 1920x1080, the system delivers its strongest performance. On Low settings, the average FPS is 122.2, which is more than double the playability threshold. Medium settings reduce this to 108.3 FPS, still a comfortable margin. High settings yield 73.1 FPS, which remains above the 60 FPS target. The Ultra preset drops to 50.4 FPS, which is 9.6 FPS shy of the playable threshold. This resolution offers the widest range of playable options.

Moving to 2560x1440, the performance curve shifts downward. Low settings produce an average of 83.6 FPS, which is well above the threshold. Medium settings maintain 72.7 FPS, still comfortably playable. High settings fall to 50.7 FPS, missing the 60 FPS mark by 9.3 FPS. The Ultra preset dips further to 31.5 FPS, which is roughly half the target frame rate. The gap between Low and Ultra at this resolution is substantial, highlighting the demands of the higher preset.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings average 45.9 FPS, which is 14.1 FPS below the threshold. Medium settings are nearly identical at 45 FPS. High settings drop to 29.5 FPS, and Ultra falls to 22.2 FPS. None of these presets reach the 60 FPS target, and even the best-case scenario at Low settings operates at roughly 76% of the needed performance. The data indicates that 4K gaming is not viable with this combination in Archeage.

The min and max FPS values are not provided in the benchmark data, so the analysis relies solely on average frame rates. This limits the ability to assess frame time consistency, but the averages alone establish clear playability boundaries. Across all resolutions, the trend is consistent: lower presets yield higher frame rates, with the most dramatic improvements seen when dropping from Ultra to Medium or Low.

Similar Performance Alternatives

The AMD Ryzen 9 5950X sits within a tight performance cluster based on its average benchmark score of 51947. Its closest rival is the Intel Core Ultra 5 235HX, which scores 52073, representing a delta of -0.2% relative to the 5950X. The AMD EPYC 8124P scores 52121, a -0.3% difference. The Intel Core i9-13900F scores 51730, which is 0.4% higher than the 5950X. The Intel Core i7-14700 leads the group with 52301, showing a -0.7% delta. These differences are negligible, meaning any of these CPUs would deliver essentially identical frame rates in Archeage when paired with the same GPU.

For the Intel Arc B580, the average benchmark score is 23021. Its nearest rival is the AMD Radeon RX 580 2048SP with a score of 23061, a -0.2% delta. The NVIDIA GeForce RTX 2080 scores 22895, showing a 0.6% difference. The NVIDIA GeForce RTX 3080 scores 23172, a -0.7% delta. The NVIDIA P106-100 scores 23249, which is -1% relative to the B580. All four rivals fall within a narrow band, suggesting that swapping the B580 for any of these GPUs would produce similar performance in Archeage. The RTX 3080 being in this group is notable, as it indicates the B580's performance level aligns with that higher-tier card in this benchmark context.

When considering the full combo, the CPU and GPU each have alternatives that would behave nearly identically. A user with an Intel Core i7-14700 or Core Ultra 5 235HX would see the same FPS numbers. Similarly, a system with an RTX 2080 or RX 580 2048SP would track closely with the B580. The practical takeaway is that this performance tier is well-populated, and small hardware swaps within these rival groups would not meaningfully change the Archeage experience.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, which averages 73.1 FPS. This provides a 13.1 FPS margin above the threshold, indicating headroom for demanding scenes. Ultra is not viable here, as it averages 50.4 FPS. Medium and Low also clear the threshold, but High is the best visual quality option that maintains playability.

At 2560x1440, the best playable setting is Medium with an average of 72.7 FPS. This is 12.7 FPS above the 60 FPS target. Low also qualifies at 83.6 FPS, but Medium offers better visual fidelity while still maintaining a comfortable margin. High and Ultra both fall below the threshold, at 50.7 and 31.5 FPS respectively, so they should be avoided for consistent 60 FPS gameplay.

At 3840x2160, no preset achieves the 60 FPS target. The best available average is Low at 45.9 FPS, which is significantly below the playable threshold. Since none of the settings qualify, there is no "best setting" that meets the criteria. Users at this resolution would need to accept sub-60 FPS performance or lower the resolution to achieve playability. The data shows a clear ceiling at 4K for this hardware combination.

The Verdict

The benchmark results indicate that this PC can run Archeage at 1080p and 1440p, but not at 4K. The verdict by resolution is clear: at 1920x1080, the playable settings are High, Low, and Medium, with High being the best option at 73.1 FPS. This clears the 60 FPS threshold by a healthy margin. At 2560x1440, Low and Medium are playable, with Medium achieving 72.7 FPS as the best preset. At 3840x2160, there are no playable settings, as even Low averages only 45.9 FPS.

For gamers targeting 1080p, the system is well-equipped. The High preset at 73.1 FPS provides a good balance of visual quality and smoothness. The Ultra preset's 50.4 FPS may be acceptable for some, but it falls short of the defined playability standard. At 1440p, Medium is the sweet spot, offering 72.7 FPS with better detail than Low. The jump from Medium to High costs 22 FPS on average, which is a steep penalty for the visual upgrade. At 4K, the system is not viable for 60 FPS play, and users should consider lowering resolution to 1440p for a playable experience.

The CPU's strong multi-threaded performance, evidenced by a Cinebench R23 multicore score of 26017, helps maintain consistent frame rates in MMO environments with many players. However, the GPU becomes the limiting factor at higher resolutions. The Arc B580's 12 GB of VRAM is sufficient for the tested settings, but the raw compute throughput at 4K is insufficient for Archeage's demands.

FAQ

Q: What is the highest resolution at which this combo can maintain 60 FPS?

A: The highest resolution with playable settings is 2560x1440, where Medium settings average 72.7 FPS and Low settings average 83.6 FPS.

Q: Can this system run Archeage at 4K?

A: No. At 3840x2160, the best average FPS is 45.9 on Low settings, which is below the 60 FPS playable threshold. Ultra averages only 22.2 FPS.

Q: What is the best preset at 1080p?

A: High settings provide the best visual quality while staying above 60 FPS, averaging 73.1 FPS. Medium and Low are also playable at 108.3 and 122.2 FPS respectively.

Q: How does the Arc B580 compare to its nearest rivals?

A: The Arc B580's average benchmark score of 23021 is within 1% of the AMD Radeon RX 580 2048SP, NVIDIA GeForce RTX 2080, NVIDIA GeForce RTX 3080, and NVIDIA P106-100, meaning performance in Archeage would be comparable.

Q: Is the Ryzen 9 5950X a bottleneck for the Arc B580 in this game?

A: Benchmark data shows the CPU scores 51947 on average, with rivals like the Intel Core i7-14700 scoring 52301. The performance delta is less than 1%, so the CPU is unlikely to be a limiting factor at playable settings.

Q: What is the lowest playable setting at 1440p?

A: Low settings are playable at 1440p with an average of 83.6 FPS. Medium is also playable at 72.7 FPS, but High drops below the threshold at 50.7 FPS.

How This Combo Ranks

In the database of tested combos for Archeage, this system ranks 2845 out of 3708 total combinations. This places it in the lower-middle portion of the ranking, indicating that while it handles 1080p and 1440p well, many other hardware combinations achieve higher average frame rates. The rank reflects the combined performance of the Ryzen 9 5950X and Arc B580 relative to all other tested CPU-GPU pairings.

The ranking position is influenced by the GPU's performance ceiling, which limits 4K capability. The CPU's percentile rank of 91 among all CPUs shows it is a high-performing processor, but the GPU's percentile rank of 68 among all GPUs brings the overall combo down. In Archeage specifically, the game's optimization and the demands of higher resolutions mean this combo sits below the 50th percentile of tested systems. Users seeking top-tier performance would need a more powerful GPU to climb the rankings, while those satisfied with 1080p or medium-settings 1440p gameplay will find this combination adequate.