Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

82%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
45 FPS

1440p (2K / QHD)

Low 1440p Measured
74 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
42 FPS
Ultra 4K Measured
17 FPS
15.2ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 58,386
Graphics Card
Required 28,463
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 17 26 38 42
1440p QHD 31 45 66 74
1080p Full HD 45 66 98 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 66
1920x1080 Low 110
1920x1080 Medium 98
1920x1080 Ultra 45
2560x1440 High 45
2560x1440 Low 74
2560x1440 Medium 66
2560x1440 Ultra 31
3840x2160 High 26
3840x2160 Low 42
3840x2160 Medium 38
3840x2160 Ultra 17

Performance Analysis: Archeage on Your System

Can AMD Ryzen 7 9850X3D + Intel Arc B570 run Archeage? The measured data indicates this combination delivers a highly playable experience at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K across all tested settings. The benchmark results reveal a system that scales predictably with resolution, with the Intel Arc B570 GPU becoming the primary bottleneck as pixel count increases.

Measured FPS Breakdown

At 1920x1080, the system performs admirably across most presets. The Low preset delivers an average of 110 FPS, which is the highest frame rate recorded for this configuration. Medium settings produce an average of 98 FPS with a minimum of 83 and maximum of 112, showing tight frame pacing. High settings maintain an average of 66 FPS, which exactly meets the playable threshold. The Ultra preset at 1080p drops to an average of 45 FPS, making it the only non-playable option at this resolution.

Moving to 2560x1440, performance degrades noticeably but remains respectable. Low settings achieve an average of 74 FPS, still comfortably above the 60 FPS threshold. Medium settings produce an average of 66 FPS with a minimum of 56 and maximum of 76, meaning the minimum dips slightly below playable levels even though the average is adequate. High settings at 1440p drop to an average of 45 FPS, while Ultra falls to 31 FPS — both clearly below playable territory.

At 3840x2160, the system struggles across all presets. Low settings yield an average of 42 FPS, Medium drops to 38 FPS with a minimum of 32 and maximum of 43, High falls to 26 FPS, and Ultra bottoms out at 17 FPS. None of these averages come close to the 60 FPS threshold, and even the minimum frame rates reveal significant stuttering potential in demanding scenes.

The frame rate deltas between presets show consistent scaling. At 1080p, the jump from Low to Medium costs 12 FPS, from Medium to High costs 32 FPS, and from High to Ultra costs 21 FPS. At 1440p, the same transitions cost 8, 21, and 14 FPS respectively. At 4K, the differences are smaller in absolute terms: 4, 12, and 9 FPS. This pattern suggests the GPU is increasingly saturated at higher resolutions, reducing the relative impact of graphical preset changes.

FAQ

Q: Does this system achieve 60 FPS at 1080p with High settings?

A: Yes. The measured average FPS at 1920x1080 with High settings is exactly 66 FPS, which clears the 60 FPS playable threshold. However, no minimum FPS data is available for this preset, so frame pacing consistency cannot be fully verified from the dataset.

Q: What is the best playable preset at 1440p?

A: Medium settings at 2560x1440 produce an average of 66 FPS with a minimum of 56 and maximum of 76. This is the most demanding preset that maintains an average above 60 FPS at this resolution, though the minimum dips below the threshold.

Q: Can this system run Archeage at 4K?

A: No. All four tested presets at 3840x2160 fail to reach 60 FPS. The highest average is 42 FPS on Low settings, and the best minimum frame rate recorded is 32 FPS on Medium. The verdict data confirms no playable settings exist at this resolution.

Q: How does the Ultra preset perform at 1080p?

A: The Ultra preset at 1920x1080 yields an average of 45 FPS, which is 15 FPS below the playable threshold. This represents a significant drop from High settings, suggesting Ultra introduces rendering features that heavily tax the Intel Arc B570.

Q: What is the most consistent frame rate data available?

A: The Medium preset at 1920x1080 provides the most complete dataset with an average of 98 FPS, minimum of 83, and maximum of 112. This 29 FPS spread between minimum and maximum indicates reasonable frame pacing for an MMORPG.

Q: Is the 1440p Medium experience smoother than the 1080p High experience?

A: Both produce identical average FPS of 66. However, the 1440p Medium preset records a minimum of 56 FPS, while no minimum data exists for 1080p High. Without that data point, the 1080p High experience cannot be directly compared for consistency.

CPU and GPU Roles

The AMD Ryzen 7 9850X3D, with its 8 cores, 16 threads, and 96 MB of shared L3 cache, provides substantial processing headroom for Archeage's MMORPG workloads. The CPU's benchmark scores — including a Cinebench R23 multi-core score of 22807 and single-core score of 2228 — indicate strong performance for both multi-threaded game logic and single-threaded rendering tasks. The PassMark single-thread score of 4704 and physics score of 4171 further reinforce this capability.

The Intel Arc B570 GPU, with its 10 GB of GDDR6 memory on a 160-bit bus delivering 380.0 GB/s bandwidth, becomes the limiting factor at higher resolutions. The GPU's PassMark G3D score of 14195 and 3DMark Steel Nomad DX12 score of 2649 place it in the 65th percentile among all GPUs. The data shows that as resolution increases from 1080p to 1440p, average FPS across all presets drops by roughly 30-40%, and from 1440p to 4K, it drops by another 40-50%.

The scaling pattern between resolutions reveals the GPU's dominance in determining performance. At 1080p Low, the system achieves 110 FPS, but at 4K Low, it drops to 42 FPS — a 62% reduction. This dramatic scaling indicates that the Arc B570's raw pixel throughput, rated at 200.0 GPixel/s, is insufficient for high-resolution rendering. The CPU's role becomes more apparent at lower resolutions where frame rates are higher; the Ryzen 7 9850X3D's strong single-thread performance helps maintain playable frame rates at 1080p even on High settings.

The preset scaling data also highlights the GPU's limitations. At 1080p, the difference between Low and Ultra is 65 FPS, while at 4K, the same preset range only produces a 25 FPS difference. This compression of frame rates at higher resolutions suggests the GPU is already saturated and cannot fully utilize the CPU's capabilities, making the system GPU-bound in all 4K scenarios.

The Verdict

This system can run Archeage at playable frame rates across most tested configurations, but with clear limitations. At 1920x1080, the data shows playable settings include High, Low, and Medium presets, with High being the best at 66 FPS average. The Ultra preset at 1080p is not playable, averaging 45 FPS. At 2560x1440, Low and Medium are playable, with Medium being the best at 66 FPS average, though its minimum of 56 FPS dips below the threshold.

At 3840x2160, the verdict is unambiguous: no playable settings exist. The best average FPS is 42 on Low settings, and even the most optimistic minimum frame rate recorded is 32 FPS on Medium. For 4K gaming, this combination of the AMD Ryzen 7 9850X3D and Intel Arc B570 falls significantly short of the 60 FPS playable threshold.

The overall combo rank of 2983 out of 3708 tested combinations places this system in the lower 20% of configurations tested for Archeage. This ranking, combined with the measured FPS data, suggests that while the system is adequate for 1080p and 1440p gaming, it is not a high-performance solution for this MMORPG at higher resolutions.

Similar Performance Alternatives

The AMD Ryzen 7 9850X3D's nearest rivals in CPU benchmark performance include the Intel Xeon Platinum 8260M with an average score of 58323 (0.1% higher), the Intel Xeon w5-2545 with 58504 (-0.2% difference), the Intel Core i9-14900 with 58115 (0.5% higher), and the AMD Ryzen AI 9 HX 470 with 58826 (-0.7% difference). These processors would behave nearly identically in Archeage, though the Xeon parts are server-class chips not typically used in gaming systems.

For the GPU, the Intel Arc B570's nearest rivals are the NVIDIA GeForce RTX 3070 Mobile with an average score of 20534 (0.1% higher), the Intel Arc A750 with 20582 (-0.1% difference), the NVIDIA Quadro M4000M with 20480 (0.4% higher), and the AMD Radeon R9 M390X with 20662 (-0.5% difference). The Intel Arc A750 is particularly notable as it is a desktop GPU like the B570, suggesting similar real-world gaming performance. The RTX 3070 Mobile and Quadro M4000M are laptop or workstation parts that would show comparable frame rates in this game.

How This Combo Ranks

This specific CPU-GPU combination ranks 2983 out of 3708 tested configurations for Archeage, placing it in the 19.5th percentile of all combinations tested. This relatively low ranking reflects the GPU's limitations at higher resolutions, despite the CPU's strong benchmark performance. The Ryzen 7 9850X3D alone ranks in the 92nd percentile among all CPUs, while the Arc B570 sits in the 65th percentile among GPUs — a significant mismatch that explains the system's GPU-bound behavior.

The combo's ranking suggests that pairing this high-end CPU with this mid-range GPU creates an imbalanced system for Archeage. The CPU's capabilities are underutilized at 4K, where the GPU limits frame rates to below 50 FPS even on low settings. At 1080p, the system performs better, but the ranking indicates that many other combinations deliver superior frame rates in this game.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains an average of at least 60 FPS is High settings, which achieves exactly 66 FPS. This is the recommended configuration for 1080p gaming. Medium settings also work well at 98 FPS, and Low provides the highest frame rate at 110 FPS.

At 2560x1440, the best playable preset is Medium settings, delivering an average of 66 FPS with a minimum of 56 and maximum of 76. Low settings provide a higher average of 74 FPS but with less visual fidelity. High and Ultra settings are not playable at this resolution, averaging 45 and 31 FPS respectively.

At 3840x2160, no preset achieves the 60 FPS threshold. The best average FPS is 42 on Low settings, followed by 38 on Medium, 26 on High, and 17 on Ultra. The verdict data confirms there are no playable settings at this resolution, making 4K gaming impossible with this configuration.