Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 10 | 15 | 22 | 25 |
| 1440p QHD | 18 | 26 | 39 | 43 |
| 1080p Full HD | 27 | 39 | 57 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
How This Combo Ranks
The combination of the AMD Ryzen 7 7700X and Intel Arc B370 ranks 3423rd out of 3708 tested combos in Archeage. This places the system in the bottom 8% of tested configurations, a position that reflects the severe bottleneck created by the graphics solution. The Intel Arc B370 is an integrated graphics processor, and its benchmark percentile of 5 means it outperforms only 5% of all GPUs in the database. The CPU, by contrast, sits at the 85th percentile among all processors, making the pairing a stark mismatch: a high-end processor constrained by an entry-level graphics engine.
The recorded data shows that this combo cannot sustain the 60 FPS playable threshold at 1440p or 4K under any tested preset. At 1080p, the system clears the threshold only on Low settings. The ranking reflects this limited playability, as the overwhelming majority of tested combos deliver higher frame rates in this MMORPG. The gap between the CPU's capability and the GPU's output is the defining characteristic of this configuration.
CPU and GPU Roles
Benchmark results indicate that the Intel Arc B370 is the limiting factor across nearly all tested conditions. The CPU, with 8 cores and 16 threads based on Zen 4 architecture, provides ample processing headroom. Its Cinebench R23 multicore score of 19088 and PassMark multithread score of 35686 demonstrate strong compute performance. However, the GPU's 3DMark Steel Nomad DX12 score of 1184 places it near the bottom of the database, and it is this graphics limitation that governs frame rates in Archeage.
The scaling between resolutions confirms the GPU bottleneck. At 1080p Low, the system averages 65 FPS. Moving to 1440p Low drops the average to 43 FPS, a reduction of 22 FPS. At 4K Low, the average falls further to 25 FPS. This steep decline with increasing resolution is characteristic of a graphics-bound scenario, where the integrated GPU's fill rate and shading capacity are overwhelmed by pixel count. The CPU's role remains secondary throughout, as even at 1080p the system cannot reach high frame rates on Medium or higher presets.
The preset scaling reinforces this conclusion. At 1080p, raising settings from Low to Medium reduces the average from 65 FPS to 57 FPS, a modest 8 FPS penalty. Going from Medium to High drops the average to 39 FPS, an 18 FPS penalty. The jump to Ultra cuts the average to 27 FPS. At 1440p, the same progression yields 43, 39, 26, and 18 FPS respectively. The disproportionate penalty at higher presets points to the GPU struggling with increased shading complexity, particularly at Ultra settings where the average at 4K falls to just 10 FPS.
Measured FPS Breakdown
The measured FPS data reveals a system that is playable only in a narrow window of settings at 1080p. At 3840x2160, the best result comes from Low settings with an average of 25 FPS. Medium settings produce 22 FPS on average, with a minimum of 19 FPS and a maximum of 25 FPS. High settings average 15 FPS, while Ultra averages 10 FPS. None of these results approach the 60 FPS threshold, and even the minimum FPS values at this resolution remain far below playable levels.
At 2560x1440, the results improve but remain inadequate. Low settings average 43 FPS, Medium averages 39 FPS with a range of 33 to 44 FPS, High averages 26 FPS, and Ultra averages 18 FPS. The minimum FPS at Medium, 33 FPS, is the only recorded minimum above 30 FPS at this resolution, yet it still falls short of the 60 FPS target.
At 1920x1080, the system finally reaches playable territory on the lowest preset. Low settings average 65 FPS, clearing the 60 FPS threshold with a small margin. Medium settings average 57 FPS, with a minimum of 49 FPS and a maximum of 66 FPS, just below the playable line. High settings average 39 FPS, and Ultra averages 27 FPS. The data shows a clear ceiling: this combo can deliver smooth gameplay only at 1080p with reduced graphical fidelity.
FAQ
Q: Can this PC run Archeage at 4K resolution?
A: No. The recorded data shows no playable settings at 3840x2160. The best average FPS at this resolution is 25 FPS on Low settings, which is far below the 60 FPS playable threshold. Ultra settings average only 10 FPS.
Q: What is the best settings preset at 1440p?
A: There is no playable preset at 2560x1440. The highest average FPS is 43 FPS on Low settings, which does not reach the 60 FPS threshold. Medium settings average 39 FPS, High averages 26 FPS, and Ultra averages 18 FPS.
Q: Is 1080p playable with this combination?
A: Only on Low settings. The average FPS at 1920x1080 Low is 65 FPS, above the 60 FPS threshold. Medium settings average 57 FPS, which is below the threshold. High and Ultra settings average 39 FPS and 27 FPS respectively.
Q: How does the Intel Arc B370 compare to its nearest rivals?
A: The Intel Arc B370 scores 1184 in 3DMark Steel Nomad DX12. The ATI Mobility Radeon HD 5570 scores 1186, a 0.2% difference. The ATI Radeon HD 5770 scores 1190, a 0.5% difference. The AMD Radeon HD 7650M scores 1192, a 0.7% difference. The AMD FirePro M2000 scores 1168, a 1.4% difference in favor of the Arc B370.
Q: Does the CPU performance affect the gaming results?
A: The CPU provides strong compute performance, with a Cinebench R23 multicore score of 19088 and a single-core score of 1987. However, the frame rates in Archeage are consistently limited by the GPU, as shown by the sharp FPS drops when increasing resolution or settings. The CPU is not the bottleneck in this configuration.
Q: What are the minimum and maximum FPS values recorded?
A: The only recorded minimum and maximum values are at Medium settings. At 1080p Medium, the range is 49 to 66 FPS. At 1440p Medium, the range is 33 to 44 FPS. At 4K Medium, the range is 19 to 25 FPS. Other settings have no recorded min or max values in the database.
Best Settings per Resolution
At 3840x2160, no preset reaches 60 FPS. The highest average is 25 FPS on Low settings, but this does not meet the playable threshold. The verdict for 4K is clear: this combo cannot run Archeage at playable frame rates.
At 2560x1440, the same conclusion applies. There are no playable settings. Low settings produce 43 FPS, which is the best result, but it remains 17 FPS short of the 60 FPS target. Medium settings average 39 FPS, High averages 26 FPS, and Ultra averages 18 FPS.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Low settings, with an average of 65 FPS. Medium settings fall just short at 57 FPS, with a minimum of 49 FPS. The data indicates that players seeking smooth performance at 1080p must accept Low settings, as the next step up in fidelity drops the average below the threshold.
The Verdict
The AMD Ryzen 7 7700X and Intel Arc B370 can run Archeage, but only under strict conditions. The verdict by resolution states that 1920x1080 is playable on Low settings, with an average FPS of 65. This is the sole configuration that clears the 60 FPS threshold. At 2560x1440, no playable settings exist, and the best average is 43 FPS on Low. At 3840x2160, no playable settings exist, and the best average is 25 FPS on Low.
The data shows a system whose potential is capped by its graphics component. The Ryzen 7 7700X is a capable processor, ranking in the 85th percentile of all CPUs, but the Arc B370 ranks in the 5th percentile of all GPUs. This imbalance makes high-resolution or high-fidelity gaming impractical. For players targeting 1080p with modest graphical demands, the combo delivers acceptable performance. For anyone expecting 1440p or 4K gameplay, the benchmark results do not support that expectation.
The verdict is straightforward: this PC can run Archeage at 1080p on Low settings with an average of 65 FPS. It cannot run the game at 60 FPS or above at any other resolution or preset combination. The recorded measurements provide no path to playable frame rates beyond that narrow configuration.