Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
45 FPS

1440p (2K / QHD)

Low 1440p Measured
74 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
42 FPS
Ultra 4K Measured
17 FPS
15.2ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 29,123
Graphics Card
Required 28,463
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 17 26 38 42
1440p QHD 31 45 66 74
1080p Full HD 45 66 98 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 66
1920x1080 Low 110
1920x1080 Medium 98
1920x1080 Ultra 45
2560x1440 High 45
2560x1440 Low 74
2560x1440 Medium 66
2560x1440 Ultra 31
3840x2160 High 26
3840x2160 Low 42
3840x2160 Medium 38
3840x2160 Ultra 17

Performance Analysis: Archeage on Your System

The AMD Ryzen 7 5800X paired with the Intel Arc B570 presents a mid-range desktop combination that targets 1080p and 1440p gaming. In Archeage, a 2014 MMORPG, the measured performance data reveals a clear hierarchy across resolutions, with the system delivering playable frame rates at lower settings but struggling to maintain 60 FPS at 4K. The following analysis breaks down the exact benchmark results, contextualizes them against rival hardware, and explains how the CPU and GPU share the workload.

Best Settings per Resolution

The most demanding preset that stays at or above 60 FPS at each resolution is directly determined by the measured FPS data. At 1920x1080, the system achieves 66 FPS on High settings, which is the highest preset that clears the 60 FPS threshold. At 2560x1440, the best playable preset is Medium, delivering exactly 66 FPS on average. For 3840x2160, no settings preset reaches 60 FPS, meaning the system cannot maintain a playable frame rate at 4K with any of the four tested quality levels.

  • 1920x1080: High settings, 66 FPS average
  • 2560x1440: Medium settings, 66 FPS average
  • 3840x2160: No playable settings (highest is Low at 42 FPS average)

The data shows a consistent pattern: each resolution step down from 4K to 1080p roughly doubles the headroom above the 60 FPS threshold. The jump from 1440p Medium to 1080p High represents a significant quality improvement while maintaining the same average frame rate, suggesting the GPU has ample headroom at 1080p to handle additional graphical effects.

FAQ

Q: Can this system run Archeage at 60 FPS on 1080p with Ultra settings?

A: No. The measured average FPS at 1920x1080 Ultra is 45 FPS, which falls below the 60 FPS playable threshold. Only High, Medium, and Low presets achieve playable frame rates at 1080p.

Q: What is the highest resolution where the system maintains a playable frame rate?

A: 2560x1440 is the highest resolution with any playable settings. At this resolution, both Low (74 FPS) and Medium (66 FPS) clear the 60 FPS threshold, but High (45 FPS) and Ultra (31 FPS) do not.

Q: How does the 4K performance compare to 1440p?

A: At 3840x2160, the system's best average FPS is 42 on Low settings, which is 28 FPS below the 60 FPS threshold. At 2560x1440, the best playable preset (Medium) delivers 66 FPS, meaning the resolution drop from 4K to 1440p yields a 57% increase in frame rate at the same quality level.

Q: Which settings preset at 1080p provides the highest frame rate?

A: Low settings at 1920x1080 delivers the highest average FPS at 110 FPS. Medium settings follow at 98 FPS, High at 66 FPS, and Ultra at 45 FPS.

Q: What are the minimum and maximum frame rates recorded at playable settings?

A: At 1440p Medium, the minimum is 56 FPS and the maximum is 76 FPS. At 1080p Medium, the minimum is 83 FPS and the maximum is 112 FPS. No min/max data is available for Low or High settings.

Q: Is the system better suited for 1080p or 1440p gaming in this title?

A: The data indicates 1080p is the stronger choice. At 1080p, the system can run High settings at 66 FPS, while at 1440p it only reaches Medium settings at the same frame rate. The 1080p High preset provides better visual quality with identical average performance.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware would deliver similar results in this combination. The AMD Ryzen 7 5800X has an average benchmark score of 29123, placing it at the 81st percentile among all CPUs. Its closest competitors include the Intel Core Ultra 5 135H (avg score 29093, 0.1% slower), the Intel Xeon Phi 7210 (avg score 29245, 0.4% faster), the Intel Core i5-13500HX (avg score 29270, 0.5% faster), and the AMD Ryzen 5 5600XT (avg score 28940, 0.6% slower). All four rivals are within a 0.6% performance delta, meaning any of these CPUs would produce nearly identical frame rates when paired with the same GPU.

On the GPU side, the Intel Arc B570 has an average benchmark score of 20556, ranking at the 65th percentile among all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (avg score 20534, 0.1% slower), the Intel Arc A750 (avg score 20582, 0.1% faster), the NVIDIA Quadro M4000M (avg score 20480, 0.4% faster), and the AMD Radeon R9 M390X (avg score 20662, 0.5% slower). The delta percentages are again minimal, suggesting that swapping the B570 for any of these alternatives would result in nearly indistinguishable Archeage performance. The Intel Arc A750 is particularly notable as a direct desktop competitor, being a previous-generation Intel discrete GPU.

For a user seeking similar system-level behavior, the data implies that replacing either the CPU or GPU with any of these near-identical rivals would maintain the same playable resolutions and settings presets. The 1080p High and 1440p Medium results would likely remain within 1 FPS of the measured values.

The Verdict

This PC can run Archeage, but only at specific resolution and settings combinations. According to the verdictByResolution data, the system achieves playable frame rates at 1920x1080 and 2560x1440, but not at 3840x2160.

At 1920x1080, the playable settings are High (66 FPS), Low (110 FPS), and Medium (98 FPS), with High being the best visual quality that stays above 60 FPS. At 2560x1440, the playable settings are Low (74 FPS) and Medium (66 FPS), with Medium being the best option. At 3840x2160, no settings achieve 60 FPS, with Low delivering the highest average at 42 FPS — well below the playable threshold.

The verdict is clear: this combination is a capable 1080p gaming system for Archeage, and it can handle 1440p if the user is willing to sacrifice some graphical fidelity. For 4K, the system is not viable for this game. The 1080p High setting at 66 FPS represents the best balance of visual quality and performance, while 1440p Medium offers a higher resolution at the cost of reduced detail. The data suggests a 1080p monitor is the optimal pairing for this hardware.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across all four settings at each resolution. At 3840x2160, the average frame rates are 26 FPS on High, 42 FPS on Low, 38 FPS on Medium, and 17 FPS on Ultra. The only preset with min/max data is Medium, showing a range of 32 to 43 FPS. The gap between Low and High at 4K is 16 FPS, while Ultra drops to less than half of Low's performance.

At 2560x1440, the averages are 45 FPS on High, 74 FPS on Low, 66 FPS on Medium, and 31 FPS on Ultra. Medium has recorded min/max values of 56 to 76 FPS. The difference between Medium and High is 21 FPS, while Low outperforms Medium by 8 FPS. Ultra at 1440p is slightly better relative to 4K Ultra, but still far from playable.

At 1920x1080, the averages are 66 FPS on High, 110 FPS on Low, 98 FPS on Medium, and 45 FPS on Ultra. Medium shows min/max of 83 to 112 FPS. The scaling from 1440p to 1080p is substantial: High improves by 21 FPS, Low by 36 FPS, Medium by 32 FPS, and Ultra by 14 FPS. The 1080p Medium preset has a minimum of 83 FPS, meaning even the worst-case frame time stays well above the 60 FPS threshold.

How This Combo Ranks

The combination of the AMD Ryzen 7 5800X and Intel Arc B570 ranks 2983 out of 3708 tested combos for Archeage. This places the system in the bottom 20% of all possible pairings in the database, which is surprising given that both components have near-average or above-average standalone benchmark scores. The CPU ranks at the 81st percentile among all CPUs, while the GPU ranks at the 65th percentile among all GPUs, yet their combined performance in this specific game lands in the lower quintile.

This ranking suggests that Archeage may be particularly demanding on one component, or that the game's engine does not scale well with the capabilities of this hardware. The rank of 2983 out of 3708 means that roughly 72% of tested combos achieve better frame rates in this game. For context, the CPU and GPU individually outperform most alternatives, but the game's optimization or specific workload characteristics may limit the system's overall standing.

The percentile rankings of the individual components (81st for CPU, 65th for GPU) do not translate to a similarly high combo rank, indicating a bottleneck or inefficiency in how these two components interact during Archeage gameplay. The data implies that other combinations, even with slightly weaker components, may deliver better results in this specific title.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU contribute to performance differently across resolutions. At 3840x2160, the system is heavily GPU-bound, as the pixel count demands significant graphics processing power. The difference between Low (42 FPS) and Ultra (17 FPS) is 25 FPS, showing that GPU load scales dramatically with quality settings. The CPU, with its 8 cores and 16 threads, likely has plenty of headroom at 4K since the GPU is the limiting factor.

At 2560x1440, the balance shifts slightly. The gap between Low (74 FPS) and Medium (66 FPS) is only 8 FPS, while High (45 FPS) and Ultra (31 FPS) drop significantly. This non-linear scaling suggests that the GPU begins to struggle with higher presets, but the CPU is still not the primary bottleneck. The 1440p Medium result of 66 FPS matches the 1080p High result of 66 FPS exactly, indicating that the GPU is the consistent limiting factor at these settings.

At 1920x1080, the CPU's role becomes more apparent. The jump from 1440p Low (74 FPS) to 1080p Low (110 FPS) is 36 FPS, which is larger than the resolution scaling would suggest if the GPU were the only constraint. This indicates that at 1080p, the CPU's single-thread and multi-thread performance (as shown by its 3dmark scores of 943 single-thread and 7586 max-threads) becomes more relevant. The 1080p Ultra result of 45 FPS, which is lower than 1440p High's 45 FPS, further confirms that the CPU is not the limiting factor at Ultra settings — the GPU's 11.52 TFLOPS of FP32 performance is insufficient for the combined load of high resolution and maximum quality.

The scaling analysis shows that the GPU dominates performance at 4K, while the CPU has more influence at 1080p. The 5800X's strong multi-threaded scores (15476 in Cinebench R23 multicore) and the B570's 380 GB/s memory bandwidth suggest the system is well-balanced for 1080p gaming, but the GPU's 10 GB of GDDR6 memory and 160-bit bus become limiting at higher resolutions. For Archeage, the data indicates that users should prioritize GPU quality settings at 1080p, but at 1440p, they will need to lower presets to Medium to maintain 60 FPS, with the CPU providing sufficient performance for the game's MMORPG workload.