Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 17 | 25 | 28 |
| 1440p QHD | 20 | 29 | 43 | 48 |
| 1080p Full HD | 29 | 43 | 64 | 71 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
How This Combo Ranks
The AMD Ryzen 7 5800X paired with the Intel Arc B390 places at rank 3297 out of 3708 tested combos in Archeage. That is a bottom-tier position, sitting in the 11th percentile of all tested configurations for this specific MMORPG. The database shows this combo lands in the lower end of the field, with only roughly 400 combinations below it.
The ranking indicates a severe mismatch. The CPU is a strong desktop processor, but the GPU is an integrated-class part that drags the overall gaming performance down. The Arc B390's average benchmark score of 1482 places it at the 9th percentile among all GPUs, meaning roughly 91% of graphics cards tested score higher. The Ryzen 7 5800X, by contrast, sits at the 81st percentile among all CPUs. This pairing creates a situation where the processor has far more capability than the graphics solution can utilize.
Looking at the nearest rivals for the GPU clarifies the situation. The Arc B390's closest competitors include the NVIDIA GeForce GT 520MX (1.3% faster), the NVIDIA GeForce 800M (1.5% faster), the NVIDIA GeForce GT 625 OEM (2.5% faster), and the NVIDIA GeForce GT 710 (2.7% faster). These are all entry-level or legacy parts. The data suggests the Arc B390 performs in a similar class to these older, low-end graphics solutions, which aligns with its integrated nature and shared system memory configuration.
The CPU's nearest rivals in average benchmark score are the Intel Core Ultra 5 135H (0.1% faster), the Intel Xeon Phi 7210 (0.4% slower), the Intel Core i5-13500HX (0.5% slower), and the AMD Ryzen 5 5600XT (0.6% faster). These deltas are all within a single percentage point, indicating the Ryzen 7 5800X delivers compute performance consistent with these mid-range and high-end mobile and desktop parts. The processor is not the bottleneck in this configuration; the data clearly points to the graphics side.
FAQ
Q: Can this PC run Archeage at 1920x1080 with playable performance?
A: Yes, at 1080p. The database shows playable settings at Low (71 average FPS) and Medium (64 average FPS), both clearing the 60 FPS threshold.
Q: What is the best settings preset at 2560x1440?
A: None of the presets at 1440p reach 60 FPS. The highest average is 48 FPS at Low settings, followed by 43 FPS at Medium, 29 FPS at High, and 20 FPS at Ultra.
Q: How does the Arc B390 compare to its closest GPU rivals?
A: The Arc B390 scores 1482 in 3DMark Steel Nomad DX12. Its nearest rivals are the GeForce GT 520MX (1463, 1.3% faster), GeForce 800M (1460, 1.5% faster), GeForce GT 625 OEM (1446, 2.5% faster), and GeForce GT 710 (1443, 2.7% faster).
Q: Is the CPU or GPU more responsible for the low frame rates?
A: The GPU is the limiting factor. The Ryzen 7 5800X ranks at the 81st percentile among CPUs, while the Arc B390 ranks at the 9th percentile among GPUs. The processor has ample headroom, but the graphics part cannot deliver sufficient throughput.
Q: What is the best achievable average FPS at 3840x2160?
A: The highest average at 4K is 28 FPS at Low settings. Medium reaches 25 FPS, High drops to 17 FPS, and Ultra falls to 11 FPS. No setting at this resolution reaches playable levels.
Q: How many total combos were tested for this game?
A: The database records 3708 tested combinations for Archeage. This specific CPU-GPU pairing ranks 3297th among them.
CPU and GPU Roles
The benchmark data reveals a clear pattern in how this combo scales across resolutions. At 1920x1080, the Arc B390 manages 71 FPS at Low settings, but that drops to 43 FPS at High, a 39% reduction. At 2560x1440, Low produces 48 FPS and High produces 29 FPS, a 40% reduction. At 3840x2160, Low yields 28 FPS and High yields 17 FPS, a 39% reduction. The consistency of this scaling across resolutions indicates the GPU is saturated at every setting level.
The CPU's role becomes secondary when examining the frame rate patterns. The Ryzen 7 5800X with its 8 cores and 16 threads provides strong single-thread performance, scoring 943 in the 3DMark single-thread test and 3445 in PassMark single-thread. Archeage, being a 2014 MMORPG, relies heavily on single-core performance for game logic and network handling. The processor should handle these tasks without issue. The fact that frame rates drop so sharply when moving from Low to High settings, regardless of resolution, points to the GPU being the constraining element.
The resolution scaling further confirms this. Moving from 1080p to 1440p at Medium settings drops average FPS from 64 to 43, a 33% reduction. Moving from 1440p to 4K at Medium drops from 43 to 25 FPS, a 42% reduction. The Arc B390's shared system memory and 7.680 TFLOPS of FP32 compute simply cannot keep up with the pixel throughput demands of higher resolutions. The CPU has the bandwidth to feed the GPU, but the graphics pipeline becomes the bottleneck.
Preset scaling tells the same story. At 1080p, the jump from Medium (64 FPS) to High (43 FPS) costs 33% performance, while High to Ultra (29 FPS) costs another 33%. The GPU's texture rate of 120.0 GTexel/s and pixel rate of 60.00 GPixel/s are modest figures, and the 24 ROPs limit fill-rate heavy effects. The CPU would not show such dramatic preset scaling if it were the limiting factor.
Similar Performance Alternatives
For the CPU, the nearest rivals in average benchmark score provide a reference frame. The Intel Core Ultra 5 135H scores 29093, just 0.1% behind the Ryzen 7 5800X's 29123. The Intel Core i5-13500HX scores 29270, 0.5% ahead. The AMD Ryzen 5 5600XT scores 28940, 0.6% behind. The Intel Xeon Phi 7210 scores 29245, 0.4% ahead. Any of these processors would deliver essentially identical compute performance in this game, assuming the same GPU is used.
For the GPU, the alternatives are all older or lower-end NVIDIA parts. The GeForce GT 520MX is 1.3% faster than the Arc B390 based on average scores. The GeForce 800M is 1.5% faster. The GeForce GT 625 OEM is 2.5% faster. The GeForce GT 710 is 2.7% faster. These deltas are minimal, meaning any of these GPUs would produce nearly identical frame rates in Archeage. If a user were to swap the Arc B390 for any of these alternatives, the measured FPS would remain within a few frames of the current results.
The database does not include rival CPU-GPU combo scores for this game, so direct comparison of full system alternatives is not available. However, the individual component data suggests that pairing the Ryzen 7 5800X with any of the listed GPU rivals would yield similar results. The bottleneck remains the graphics solution, not the processor.
Measured FPS Breakdown
At 3840x2160, the recorded data shows 17 average FPS at High settings, 28 average FPS at Low settings, 25 average FPS at Medium settings with a minimum of 21 and maximum of 28, and 11 average FPS at Ultra settings. The Medium preset provides the only min/max data at this resolution, indicating some frame variance, while other presets report only averages.
At 2560x1440, High settings produce 29 average FPS. Low settings produce 48 average FPS. Medium settings produce 43 average FPS with a minimum of 36 and maximum of 49. Ultra settings produce 20 average FPS. The Medium preset again shows the widest recorded range, with a 13 FPS spread between minimum and maximum.
At 1920x1080, High settings produce 43 average FPS. Low settings produce 71 average FPS, the highest recorded value across all resolutions and presets. Medium settings produce 64 average FPS with a minimum of 54 and maximum of 73. Ultra settings produce 29 average FPS. The 1080p Medium preset shows a 19 FPS spread between minimum and maximum, the largest variance in the entire dataset.
The progression across resolutions is consistent. Each step up in resolution reduces average FPS by roughly 30-40% at the same preset. The Low preset at 1080p is the only configuration that approaches 60 FPS with significant headroom, while Medium at 1080p barely clears the threshold with 64 average FPS.
The Verdict
The verdict by resolution from the database is clear. At 3840x2160, no settings preset is playable. The playable settings list is empty, and there is no best settings recommendation. At 2560x1440, the same result applies: no playable settings, no best settings, no average FPS at best.
At 1920x1080, the situation changes. The playable settings list includes Low and Medium. The best settings preset is Medium, with an average FPS of 64 at that setting. This clears the 60 FPS threshold with a small margin. Low settings at 1080p deliver 71 average FPS, providing more headroom but with reduced visual quality.
The answer to whether this PC can run Archeage is conditional. It can run the game at 1080p with Low or Medium settings, maintaining average frame rates above the 60 FPS playable threshold. It cannot run the game at 1440p or 4K with any preset reaching 60 FPS. The highest average at 1440p is 48 FPS at Low, and at 4K it is 28 FPS at Low. For users targeting higher resolutions, this combo is not sufficient. For 1080p gaming with moderate settings, it meets the minimum playable standard.
Best Settings per Resolution
At 3840x2160, there is no preset that achieves 60 FPS or higher. The database records no playable settings for this resolution, meaning even Low settings at 28 average FPS fall far short of the threshold.
At 2560x1440, the same applies. No preset reaches 60 FPS. The closest is Low at 48 average FPS, but this is still 12 FPS below the playable threshold. Medium produces 43 average FPS, and both High and Ultra fall below 30 FPS.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 64 FPS. This is the recommended maximum visual quality setting for this resolution. Low settings at 71 average FPS provide better performance but with lower visual fidelity. High settings drop to 43 average FPS, and Ultra falls to 29 average FPS, neither of which clears the playable threshold.
The data suggests a narrow window of usability. Users who prioritize frame rate stability should select Medium at 1080p, accepting the 54 FPS minimum recorded in the data. Users who prefer smoother frame pacing might opt for Low at 1080p, which has no recorded minimum below 60 FPS in the dataset. The choice depends on whether visual quality or frame rate consistency matters more for the individual player.