Archeage

The AMD Ryzen 7 5700 and Intel Arc B570 combination delivers a thoroughly mid-range experience in Archeage, a 2014 MMORPG that still demands respect from modern hardware. The data shows a system that is perfectly capable at 1080p, acceptable at 1440p with settings compromises, and largely out of its depth at 4K. This analysis breaks down exactly where this pairing stands, how the components share the workload, and what frame rates you can actually expect.

Similar Performance Alternatives

The CPU and GPU in this system each sit in a well-populated performance neighborhood, meaning several alternative components would produce nearly identical results. For the processor, the Ryzen 7 5700’s average benchmark score of 25,517 places it within a razor-thin margin of its nearest rivals. The Intel Xeon D-2752TER scores 25,530, a delta of just -0.1%, while the AMD Ryzen 5 7640U scores 25,485, a delta of +0.1%. The AMD Ryzen 5 6600H is also essentially tied at 25,550 (-0.1%), and the AMD Ryzen 7 5825U trails slightly at 25,446 (+0.3%). In practical terms, swapping the Ryzen 7 5700 for any of these four chips would yield imperceptible differences in Archeage performance, as the CPU is rarely the limiting factor in this title.

On the graphics side, the Intel Arc B570’s average benchmark score of 20,556 is similarly clustered. The NVIDIA GeForce RTX 3070 Mobile scores 20,534 (delta +0.1%), the Intel Arc A750 scores 20,582 (delta -0.1%), the NVIDIA Quadro M4000M scores 20,480 (delta +0.4%), and the AMD Radeon R9 M390X scores 20,662 (delta -0.5%). The Arc A750 is a particularly notable comparison, as it represents Intel’s previous generation and shows that the B570 offers essentially identical rasterization performance in this class. Gamers considering a system with any of these GPUs should expect the same frame rates in Archeage, assuming the CPU keeps up.

CPU and GPU Roles

The benchmark data reveals a system where the GPU is overwhelmingly the dominant factor in Archeage, but the CPU’s role becomes more apparent at lower resolutions. At 4K, the workload is entirely graphics-bound. Scaling from Low to Ultra settings at 3840x2160 drops the average frame rate from 42 FPS to 17 FPS, a 25 FPS swing that highlights the GPU’s struggle with the pixel count and shader complexity. The CPU’s 8 cores and 16 threads are more than sufficient to feed the Arc B570 at this resolution, as the frame rate is dictated by the graphics pipeline, not processor throughput.

Moving to 2560x1440, the balance shifts slightly. The average FPS at Low settings jumps to 74, while High settings yield 45 FPS and Medium lands at 66 FPS. The gap between Low and Medium is 8 FPS, while the gap between Medium and High is 21 FPS, indicating that the GPU is still the primary bottleneck but that the CPU has more headroom to work with. At 1920x1080, the CPU’s contribution becomes marginally more relevant. The Low preset hits 110 FPS average, which approaches the point where a weaker processor could start to limit frame pacing. However, the Ryzen 7 5700’s single-thread score of 901 in 3DMark and its 3,296 Passmark single-thread score suggest it has ample strength to avoid becoming a bottleneck even at these higher frame rates. The data indicates the GPU is the component to upgrade first for better Archeage performance, particularly at 4K, while the CPU is a non-issue for the vast majority of playable configurations.

Measured FPS Breakdown

The measured frame rates provide a complete picture of this system’s capabilities across resolutions and presets. At 3840x2160, the results are marginal at best. The Low preset produces an average of 42 FPS, with no min or max data recorded. Medium settings drop the average to 38 FPS, with a minimum of 32 FPS and a maximum of 43 FPS. High settings yield 26 FPS average, and Ultra settings collapse to 17 FPS average. None of these configurations reach the 60 FPS playable threshold, and even the Low preset’s 42 FPS average would feel sluggish in an MMORPG with frequent combat animations and player character movements.

At 2560x1440, the system becomes viable with the right settings. The Low preset delivers a solid 74 FPS average. Medium settings are close behind at 66 FPS average, with a documented range of 56 to 76 FPS, meaning the frame rate can dip below 60 FPS during intense moments. High settings drop to 45 FPS average, and Ultra falls to 31 FPS average. The data shows that Medium is the sweet spot at this resolution, offering a playable average while maintaining visual quality above the lowest preset.

At 1920x1080, the system shines. The Low preset reaches 110 FPS average, Medium hits 98 FPS with a range of 83 to 112 FPS, and High manages 66 FPS average. Ultra settings drop to 45 FPS average, which is below the playable threshold. The High preset’s 66 FPS average is above 60, but it lacks min/max data, so there is no guarantee it stays there during heavy load. The Medium preset’s documented minimum of 83 FPS provides more certainty for consistent performance.

The Verdict

Can this PC run Archeage? The answer depends entirely on your resolution and settings expectations. The data clearly shows that 1920x1080 is the primary target for this combination. The verdict data lists High, Low, and Medium as playable settings at this resolution, with High being the best playable option at an average of 66 FPS. This clears the 60 FPS threshold, though the lack of min/max data for High means users should expect occasional dips below 60 FPS in crowded areas. For a more stable experience, Medium settings at 98 FPS average with a minimum of 83 FPS are the safer choice.

At 2560x1440, the system is playable only on Low and Medium settings. Medium is the best playable option, delivering 66 FPS average with a minimum of 56 FPS, which means it will occasionally dip below 60 FPS but remains mostly smooth. Low settings at 74 FPS average provide more headroom. High and Ultra are not viable at this resolution.

At 3840x2160, the verdict is unambiguous: no settings are playable. The best result is 42 FPS on Low, which falls well short of the 60 FPS threshold. This system is not designed for 4K gaming in Archeage, and users should avoid that resolution entirely. Overall, the Ryzen 7 5700 and Arc B570 combination is a competent 1080p machine for this game, a passable 1440p machine with compromises, and a non-starter at 4K.

FAQ

Q: Can this system run Archeage at 1920x1080 with High settings?

A: Yes. The measured average FPS at 1080p High is 66 FPS, which clears the 60 FPS playable threshold. The verdict data confirms High is a playable setting at this resolution.

Q: What is the best playable settings preset at 2560x1440?

A: Medium settings is the best playable option at 1440p, with an average of 66 FPS and a minimum of 56 FPS. Low settings also work at 74 FPS average, but Medium offers better visual quality while staying mostly above 60 FPS.

Q: Is 4K gaming possible with this hardware?

A: No. At 3840x2160, even the Low preset only achieves 42 FPS average. The Ultra preset drops to 17 FPS average. The verdict data lists no playable settings at this resolution.

Q: How does the Intel Arc B570 compare to the Intel Arc A750?

A: The Arc B570 has an average benchmark score of 20,556, while the Arc A750 scores 20,582, a delta of -0.1%. They are effectively identical in performance, so Archeage frame rates would be nearly the same with either GPU.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the clear bottleneck, especially at higher resolutions. The CPU’s single-thread and multi-thread scores are strong, and frame rates scale dramatically with graphics settings, indicating the graphics card determines performance.

Q: What average FPS does the system achieve at 1080p Low settings?

A: The measured average FPS at 1920x1080 Low is 110 FPS. This is the highest frame rate recorded for this combination across all tested configurations.

How This Combo Ranks

In the broader context of tested hardware combinations for Archeage, this pairing sits in a modest position. The combo rank is 2,983 out of 3,708 total tested combinations, placing it in the lower third of all systems. This ranking reflects the Arc B570’s position as a mid-range GPU (65th percentile among all GPUs) and the Ryzen 7 5700’s similar standing (78th percentile among all CPUs). The rank suggests that while this system is fully capable of running Archeage at 1080p and playable at 1440p, there are over 700 tested combinations that deliver better performance.

The ranking is primarily dragged down by the GPU’s 4K performance, where the card simply lacks the raw throughput to maintain playable frame rates. The CPU, by contrast, is not a significant liability; its benchmark scores are competitive with rivals like the Ryzen 5 6600H and Ryzen 7 5825U, and its 8-core/16-thread configuration provides ample headroom for MMORPG workloads. The data indicates that upgrading the GPU would dramatically improve the combo’s rank, while a CPU upgrade would yield minimal gains. For users targeting 1080p, this system performs admirably, but for those seeking 1440p High or any 4K capability, higher-ranked combinations would be necessary.