Archeage

AMD Ryzen 5 8400F and Intel Arc B570 form a mid-range pairing that handles Archeage capably at 1080p and 1440p, but the game’s older engine and heavy CPU demands show clear limits at 4K. Measured data confirms this combo delivers smooth playable frame rates up to High settings at 1080p and Medium at 1440p, while 4K remains out of reach even on Low settings. The following breakdown uses only the benchmark results recorded for this specific CPU-GPU combination.

Measured FPS Breakdown

At 1920x1080, the combo’s strongest resolution, frame rates are consistently above the 60 FPS playable threshold for three of four presets. Low settings produce an average of 110 FPS, with no minimum or maximum recorded. Medium averages 98 FPS, with a minimum of 83 FPS and a maximum of 112 FPS. High averages 66 FPS, still comfortably playable. Ultra drops to an average of 45 FPS, falling below the 60 FPS threshold and making it unsuitable for smooth play.

Moving to 2560x1440, the pattern shifts downward. Low averages 74 FPS, staying above 60. Medium averages 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS—the minimum dips slightly below the playable threshold, but the average remains solid. High falls to 45 FPS average, and Ultra drops further to 31 FPS. Neither High nor Ultra meets the 60 FPS playable standard at this resolution.

At 3840x2160, the combo struggles across all presets. Low averages 42 FPS, Medium averages 38 FPS (with a minimum of 32 and maximum of 43), High averages 26 FPS, and Ultra averages just 17 FPS. No settings at 4K reach the 60 FPS playable threshold, meaning this resolution is effectively unplayable with this pairing.

The data shows a consistent scaling pattern: lowering settings from Ultra to Low roughly doubles frame rates at each resolution. At 1080p, the jump from Ultra (45 FPS) to Low (110 FPS) represents a 144% improvement. At 1440p, the same preset change goes from 31 FPS to 74 FPS, a 139% gain. At 4K, the improvement from Ultra (17 FPS) to Low (42 FPS) is 147%. This suggests the game’s settings have a strong impact on GPU load, but the absolute numbers at 4K indicate the Arc B570 lacks the raw throughput needed for that resolution.

CPU and GPU Roles

Benchmark results indicate Archeage is an older MMORPG (released in 2014) that relies heavily on CPU performance in many scenes, but the measured FPS scaling between presets reveals where the GPU becomes the limiting factor. At 1080p, the Ryzen 5 8400F’s single-thread performance (3dmark single-thread score of 951, Cinebench R23 single-core of 2943) is sufficient to keep the GPU fed, as evidenced by the large FPS jumps when lowering settings. The 8400F’s six Zen 4 cores and 12 threads provide solid baseline performance, though the game’s age means it may not leverage all cores effectively.

At 1440p, the GPU begins to take a more prominent role. The difference between Low (74 FPS) and Medium (66 FPS) is only 8 FPS, while the gap between Medium and High (45 FPS) is 21 FPS. This nonlinear scaling suggests the Arc B570’s memory bandwidth (380.0 GB/s) and 10 GB GDDR6 buffer become stressed as texture and shading complexity increase. The GPU’s 80 ROPs and 144 TMUs handle the load, but the 160-bit memory bus limits higher preset performance.

At 4K, the GPU is clearly the bottleneck. The Arc B570’s 11.52 TFLOPS FP32 compute and 200.0 GPixel/s pixel rate are insufficient for Archeage’s draw calls at this resolution. Even Low settings only achieve 42 FPS average. The CPU’s role diminishes at 4K because the frame rate is so low that the 8400F has ample headroom. However, the 8400F’s 16 MB L3 cache and dual-channel DDR5 memory bandwidth (83.2 GB/s) are adequate for the game’s needs, meaning upgrading the GPU would be the only path to playable 4K.

How This Combo Ranks

This specific combination ranks 2983 out of 3708 tested combos for Archeage. That places it in roughly the 20th percentile of all tested CPU-GPU pairs, indicating it is a below-average performer for this game overall. The ranking reflects the fact that Archeage is CPU-sensitive and the 8400F, while capable, is not a top-tier processor. The 8400F’s percentileVsAllCpus is 77, meaning it outperforms 77% of all tested CPUs, but the Arc B570’s percentileVsAllGpus is 65. The GPU is the weaker link in this pairing.

The combo’s rank of 2983 suggests that many other hardware combinations deliver better Archeage performance, particularly those with stronger GPUs. The 8400F’s average benchmark score of 25005 places it close to several rivals, but none of those rivals are paired with the B570 in this dataset. For the game itself, the measured FPS at 1080p High (66 FPS) and 1440p Medium (66 FPS) are the best playable outcomes, which is modest compared to what higher-ranked combos likely achieve.

FAQ

Q: Can this combo run Archeage at 60 FPS on Ultra settings?

A: No. At 1920x1080 Ultra, the average FPS is 45. At 2560x1440 Ultra, it drops to 31. At 3840x2160 Ultra, it is 17. None of these meet the 60 FPS playable threshold.

Q: What is the best playable setting at 2560x1440?

A: Medium settings provide the highest quality that stays at or above 60 FPS, with an average of 66 FPS. The minimum of 56 FPS may cause occasional dips, but the average remains playable.

Q: Is 4K playable with any settings?

A: No. The best 4K result is Low settings at 42 FPS average, which is below the 60 FPS threshold. Medium averages 38 FPS, High 26 FPS, and Ultra 17 FPS.

Q: How does the Arc B570 compare to its closest GPU rival in raw performance?

A: The Arc B570’s average benchmark score is 20556. Its nearest rival, the NVIDIA GeForce RTX 3070 Mobile, scores 20534, which is 0.1% lower. The Intel Arc A750 scores 20582, which is 0.1% higher. Performance differences are negligible.

Q: Is the Ryzen 5 8400F a strong CPU for this game?

A: The 8400F has a percentileVsAllCpus of 77, meaning it beats 77% of all tested CPUs. Its multi-threaded performance (Cinebench R23 multi-core of 20851) and single-thread score (2943) are solid, but Archeage’s age means it may not utilize all 12 threads effectively.

Q: What FPS can I expect at 1080p High settings?

A: The average is 66 FPS, which is just above the playable threshold. No minimum or maximum values were recorded for this preset, so variance is unknown.

Similar Performance Alternatives

Based on nearestRivals data for both components, several hardware combinations would behave similarly to the Ryzen 5 8400F and Arc B570 in Archeage.

On the CPU side, the AMD Ryzen 5 7500F has an average benchmark score of 24964, which is 0.2% lower than the 8400F’s 25005. This near-identical performance means swapping the 8400F for the 7500F would produce virtually the same frame rates. The Intel Core i7-11850H (avg score 24935, 0.3% lower) and Intel Core i7-13620H (avg score 24911, 0.4% lower) are also close matches, though these are mobile processors that would require a different platform. The AMD EPYC 9474F scores 25103 (0.4% higher), but this is a server chip and not a practical desktop alternative.

On the GPU side, the NVIDIA GeForce RTX 3070 Mobile has an average benchmark score of 20534, which is 0.1% lower than the Arc B570’s 20556. This mobile GPU would offer nearly identical performance, though it is not a direct desktop replacement. The Intel Arc A750 scores 20582 (0.1% higher), making it the closest desktop alternative—users would see essentially the same FPS in Archeage. The NVIDIA Quadro M4000M (20480, 0.4% lower) and AMD Radeon R9 M390X (20662, 0.5% higher) are also within 0.5% but are older or workstation-oriented parts.

For a practical desktop build, pairing the Ryzen 5 8400F with an Intel Arc A750 would deliver nearly identical Archeage performance, as would using a Ryzen 5 7500F with the Arc B570. None of these alternatives would meaningfully change the playable settings or FPS numbers reported above.

Best Settings per Resolution

1920x1080: The most demanding preset that stays at or above 60 FPS is High, with an average of 66 FPS. This provides the best visual quality while maintaining playability. Low (110 FPS) and Medium (98 FPS) also work, but High offers more detail without sacrificing the 60 FPS target.

2560x1440: The best playable setting is Medium, averaging 66 FPS. Low (74 FPS) also works, but Medium provides richer visuals. Note that the minimum FPS at Medium is 56, which may cause brief stutters in crowded areas.

3840x2160: No settings achieve 60 FPS. The highest average is Low at 42 FPS, which is not playable by the 60 FPS standard. Users with 4K displays should lower the resolution to 1440p for a playable experience.

The data clearly shows this combo is best suited for 1080p gaming with High presets or 1440p with Medium presets. Pushing beyond these limits results in frame rates that fall below the playable threshold, and 4K is not a viable option with this hardware pairing.