Archeage

The AMD Ryzen 5 7600X paired with the Intel Arc B580 delivers a playable Archeage experience at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K. Benchmark data shows this combination achieves its best results at 1920x1080 with High settings, averaging 77 FPS, while the 4K Ultra preset drops to a mere 17.7 FPS. The system ranks 2837 out of 3708 tested combinations for this game, placing it in the 76th percentile of all configurations, with the Arc B580 sitting at the 68th percentile among GPUs and the 7600X at the 79th percentile among CPUs.

Measured FPS Breakdown

At 1920x1080, the system clears the 60 FPS threshold across three of four presets. Low settings produce an average of 122.7 FPS, Medium reaches 109.8 FPS, and High delivers 77 FPS. The Ultra preset drops to 52.5 FPS, missing the playable threshold by 7.5 frames. The scaling from Low to Ultra at 1080p shows a 57.2% performance reduction, indicating that the Ultra preset imposes significant rendering costs that this hardware cannot fully absorb.

Moving to 2560x1440, the playable presets narrow to Low and Medium. Low averages 84.1 FPS, while Medium holds at 75.8 FPS. High falls to 52.4 FPS, and Ultra plummets to 31.8 FPS. The transition from 1080p High to 1440p High represents a 32% frame rate loss, while the same resolution change at Low costs only 31.4% of performance. The gap between Medium and High at 1440p is 23.4 FPS, a larger absolute drop than the 11 FPS difference seen at 1080p, suggesting that memory bandwidth or fill-rate limits become more pronounced at higher pixel counts.

At 3840x2160, no preset reaches 60 FPS. Low averages 48.3 FPS, Medium 40.8 FPS, High 27.9 FPS, and Ultra 17.7 FPS. The delta between Low and Medium at 4K is 7.5 FPS, while the jump from High to Ultra costs 10.2 FPS. The overall scaling from 1080p Low (122.7 FPS) to 4K Low (48.3 FPS) shows a 60.6% performance drop, which is steeper than the 55.7% drop seen when going from 1080p High (77 FPS) to 4K High (27.9 FPS). This indicates that lower settings are more sensitive to resolution scaling, likely due to CPU-bound behavior at lower graphical loads.

The data contains no minimum or maximum frame time measurements, only averages. This limits analysis of frame pacing and stutter behavior, but the average figures alone show that 4K gaming is not viable on this hardware for Archeage, regardless of preset selection.

FAQ

Q: Can this PC run Archeage at 60 FPS on 1080p Ultra settings?

A: No. The measured average at 1920x1080 Ultra is 52.5 FPS, which falls 7.5 FPS short of the 60 FPS playable threshold. High settings at 1080p achieve 77 FPS, so dropping one preset level resolves the shortfall.

Q: What is the highest playable preset at 2560x1440?

A: Medium settings at 2560x1440 average 75.8 FPS, making it the most demanding preset that clears 60 FPS at this resolution. High settings at 1440p drop to 52.4 FPS, which is not playable by the 60 FPS standard.

Q: Is 4K gaming possible with this hardware for Archeage?

A: No. The best 4K result is 48.3 FPS on Low settings, and every other preset falls further behind. Ultra at 4K averages only 17.7 FPS. The verdict data lists no playable settings at 3840x2160.

Q: How does the Arc B580 compare to its nearest rivals in this build?

A: The Arc B580 has an average benchmark score of 23021. Its nearest rival, the AMD Radeon RX 580 2048SP, scores 23061, a 0.2% difference. The NVIDIA GeForce RTX 2080 scores 22895 (0.6% lower), while the RTX 3080 scores 23172 (0.7% higher). The performance band is tight, spanning less than 2% across these four GPUs.

Q: What CPU performance level is required to support these frame rates?

A: The Ryzen 5 7600X posts a PassMark multithread score of 28390 and a single-thread score of 4135. Its nearest CPU rival, the AMD Ryzen 7 5700X, scores 27578 (0.2% lower), while the Intel Core i5-12600K matches at 27578. The CPU's 79th percentile ranking suggests it is not the primary bottleneck at 1080p Low, where the GPU becomes the limiting factor.

Q: Is the measured data actual gameplay or synthetic testing?

A: The data is marked as "dataIsMeasured: true," indicating these are real gameplay FPS measurements rather than theoretical estimates. The rank of 2837 out of 3708 combinations reflects this measured performance across the full benchmark database.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 5 7600X's nearest rivals are nearly identical in average score. The AMD Ryzen 7 5700X and Intel Core i5-12600K both score 27578, just 0.2% lower than the 7600X's 27636. The AMD Ryzen 7 5800 scores 27535 (0.4% lower), and the AMD Ryzen 5 8500GE scores 27712 (0.3% higher). In practical terms, any of these CPUs would deliver near-identical frame rates in Archeage, with differences well under 1% translating to less than 1 FPS at any preset.

On the GPU side, the Intel Arc B580's nearest rivals form an unusually tight cluster. The AMD Radeon RX 580 2048SP scores 23061 (0.2% higher than the B580's 23021), the NVIDIA GeForce RTX 2080 scores 22895 (0.6% lower), the RTX 3080 scores 23172 (0.7% higher), and the NVIDIA P106-100 scores 23249 (1% higher). This means swapping the B580 for an RTX 3080 would change Archeage performance by less than 1 FPS in the measured scenarios. The RTX 3080 typically commands a different market position, but in this specific game's benchmark data, the B580 matches it within measurement error.

For 1440p Medium at 75.8 FPS, any of these GPU alternatives would produce approximately 75-76 FPS, keeping the experience above the 60 FPS threshold. At 4K Low (48.3 FPS), the alternatives would land between 47.8 and 48.8 FPS, still below playability. The CPU alternatives would not alter the verdict at any resolution, as the 0.2-0.4% score differences fall within run-to-run variance.

The Verdict

This PC can run Archeage at 60 FPS in two resolutions: 1920x1080 and 2560x1440. At 1080p, the playable presets are Low (122.7 FPS), Medium (109.8 FPS), and High (77 FPS). The Ultra preset at 1080p fails at 52.5 FPS. At 1440p, only Low (84.1 FPS) and Medium (75.8 FPS) clear the threshold. The 4K resolution has no playable settings, with the best result being 48.3 FPS on Low.

The verdict data confirms this pattern explicitly: 3840x2160 lists zero playable settings, 2560x1440 lists Low and Medium as playable with Medium as the best option at 75.8 FPS, and 1920x1080 lists High, Low, and Medium as playable with High as the best option at 77 FPS. The system's overall rank of 2837 out of 3708 combinations indicates it sits in the upper-middle range of all tested hardware for this game.

For the smoothest experience, 1080p High at 77 FPS provides a comfortable margin above the 60 FPS threshold while maintaining visual quality. Players wanting maximum fidelity should avoid Ultra at any resolution, as even 1080p Ultra fails to reach 60 FPS.

CPU and GPU Roles

The data shows clear resolution-dependent scaling in component roles. At 1920x1080 Low, the system achieves 122.7 FPS, which is likely CPU-limited given the Arc B580's modest 13.67 TFLOPS FP32 throughput. The Ryzen 5 7600X's strong single-thread performance (PassMark single-thread score of 4135, Geekbench single-core of 2603) supports this interpretation. As resolution increases to 2560x1440 Low, the frame rate drops to 84.1 FPS, a 31.5% reduction that reflects the GPU taking on more of the workload.

At 4K Low, the system manages 48.3 FPS, which is 60.6% lower than 1080p Low. This steep decline indicates the GPU becomes the primary bottleneck at higher resolutions. The Arc B580's 456.0 GB/s memory bandwidth and 192-bit bus width are likely limiting factors at 4K, where pixel throughput requirements exceed what the 80 ROPs and 213.6 GPixel/s pixel rate can sustain.

The preset scaling tells a similar story. At 1080p, the difference between Low (122.7 FPS) and Ultra (52.5 FPS) is 70.2 FPS, a 57.2% drop. At 1440p, the same preset range spans from 84.1 to 31.8 FPS, a 62.2% drop. At 4K, the range narrows to 48.3 to 17.7 FPS, a 63.4% drop. This widening percentage gap as resolution increases confirms that GPU load grows faster than CPU load relative to settings changes.

The CPU's role is most apparent at 1080p Low, where the 122.7 FPS result suggests the GPU is not fully saturated. The Ryzen 5 7600X's 6 cores and 12 threads with a 5.30 GHz boost clock provide ample headroom for Archeage's MMO workloads, which typically involve many draw calls and physics calculations. At 1440p and 4K, the GPU's rendering demands dominate, and the CPU's contribution becomes secondary.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with a measured average of 77 FPS. This provides a 17 FPS margin over the playable threshold. Medium at 109.8 FPS and Low at 122.7 FPS also qualify, but High offers the best visual quality within the 60 FPS constraint. Ultra at 52.5 FPS is not viable.

At 2560x1440, Medium is the highest playable preset, averaging 75.8 FPS. This leaves a 15.8 FPS safety margin. Low at 84.1 FPS also works, but High at 52.4 FPS and Ultra at 31.8 FPS do not meet the threshold. The 1440p Medium setting delivers a 28.8 FPS improvement over the next playable step down, making it the clear recommendation.

At 3840x2160, no preset achieves 60 FPS. The closest option is Low at 48.3 FPS, which is 11.7 FPS below the threshold. Medium at 40.8 FPS, High at 27.9 FPS, and Ultra at 17.7 FPS are progressively worse. The verdict data lists no playable settings for 4K, meaning players must either lower their resolution or accept sub-60 FPS performance. Given the measured results, 4K gaming on this hardware is not recommended for Archeage.