Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 17 | 25 | 28 |
| 1440p QHD | 20 | 29 | 43 | 48 |
| 1080p Full HD | 29 | 43 | 64 | 71 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Measured FPS Breakdown
The recorded data for Archeage with the AMD Ryzen 5 7600X and Intel Arc B390 shows a wide performance spread across resolutions and presets. At 3840x2160, the highest resolution tested, the frame rates are consistently low. The Low preset averages 28 FPS, Medium averages 25 FPS with a minimum of 21 FPS and a maximum of 28 FPS, High drops further to 17 FPS, and Ultra bottoms out at 11 FPS. None of these figures approach the 60 FPS playable threshold, and even the best case at this resolution, Low at 28 FPS, remains less than half of that target.
Moving to 2560x1440, the situation improves but remains below the playable threshold across all presets. Low settings deliver an average of 48 FPS, Medium reaches 43 FPS with a range of 36 to 49 FPS, High falls to 29 FPS, and Ultra manages only 20 FPS. The gap between Low and Medium is modest, only 5 FPS, which suggests that the medium preset does not impose a heavy additional load at this resolution. The drop from Medium to High is much steeper, a 14 FPS decline, indicating a significant jump in rendering cost between those two quality levels.
At 1920x1080, the data finally shows playable performance. Low settings average 71 FPS, which clears the 60 FPS threshold comfortably. Medium averages 64 FPS with a minimum of 54 FPS and a maximum of 73 FPS, also clearing the threshold on average. High drops to 43 FPS, and Ultra falls to 29 FPS. The scaling from Medium to High at this resolution is a 21 FPS loss, the largest single-preset drop in the entire dataset. Interestingly, the difference between Low and Medium is only 7 FPS, while the difference between Medium and High is three times larger, suggesting that the High preset introduces effects that are disproportionately expensive for this integrated GPU.
The data also reveals how resolution scaling affects performance. Comparing the same preset across resolutions, Low goes from 71 FPS at 1080p to 48 FPS at 1440p to 28 FPS at 2160p. That is a 23 FPS loss moving from 1080p to 1440p, and another 20 FPS loss moving from 1440p to 2160p. Medium follows a similar pattern: 64 FPS at 1080p, 43 FPS at 1440p, and 25 FPS at 2160p. The resolution scaling is roughly consistent, with each step up in resolution cutting the frame rate by roughly a third to a half, depending on the preset.
Best Settings per Resolution
For 3840x2160, no preset in the recorded data reaches 60 FPS. The best available option is Low, which averages 28 FPS, but that falls far short of the playable threshold. The verdict data confirms this, listing no playable settings for this resolution.
For 2560x1440, the same conclusion applies. No preset reaches 60 FPS. Low is the highest performing option at 48 FPS, but the verdict data lists no playable settings at this resolution either. Even the least demanding preset leaves the system 12 FPS short of the threshold.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 64 FPS. Low also clears the threshold at 71 FPS, but Medium is the higher quality option that still maintains playability. The verdict data confirms Medium as the best settings choice at this resolution, with an average FPS of 64. High and Ultra both fall below 60 FPS, at 43 FPS and 29 FPS respectively, so they are not viable if the goal is a consistent 60 FPS experience.
It is notably the Medium preset at 1080p has a recorded minimum of 54 FPS, which means that while the average clears the threshold, individual moments during gameplay may dip below 60 FPS. The maximum recorded at that setting is 73 FPS, so the frame rate fluctuates considerably. This is important context for players who are sensitive to frame time consistency, as the average alone does not guarantee a locked 60 FPS experience.
Similar Performance Alternatives
The database places the AMD Ryzen 5 7600X in the 79th percentile among all tested CPUs, with an average benchmark score of 27636. Its nearest rivals are all within a narrow band of performance. The AMD Ryzen 7 5700X scores 27578, a 0.2% difference. The Intel Core i5-12600K also scores 27578, again 0.2% away. The AMD Ryzen 5 8500GE scores 27712, which is 0.3% higher than the 7600X. The AMD Ryzen 7 5800 scores 27535, 0.4% lower. In practical terms, any of these CPUs would deliver nearly identical CPU-bound performance in Archeage. The differences are so small that they would be imperceptible in real gameplay, and the choice between them would come down to platform considerations rather than raw performance.
The GPU side tells a different story. The Intel Arc B390 sits in the 9th percentile among all tested GPUs, with an average benchmark score of 1482. Its nearest rivals are all NVIDIA parts from much older generations. The NVIDIA GeForce GT 520MX scores 1463, 1.3% lower. The NVIDIA GeForce 800M scores 1460, 1.5% lower. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5% lower. The NVIDIA GeForce GT 710 scores 1443, 2.7% lower. These are all entry-level or legacy parts, which underscores how limited the Arc B390 is in absolute terms. The gap between the B390 and its nearest rivals is slightly larger than the gap among the CPU rivals, but the overall picture is the same: hardware in this performance tier will group together closely in gameplay.
The combination of a strong CPU in the 79th percentile and a weak GPU in the 9th percentile creates a heavily GPU-bound system. In Archeage, the measured frame rates reflect this imbalance, as the CPU has ample headroom while the GPU struggles to push frames at higher resolutions and presets.
The Verdict
Can this PC run Archeage? The answer depends entirely on the resolution and settings. At 1920x1080, yes, but only on Low or Medium settings. Low averages 71 FPS and Medium averages 64 FPS, both clearing the 60 FPS threshold. High and Ultra do not, with averages of 43 FPS and 29 FPS respectively. The verdict data confirms that 1920x1080 is the only resolution with playable settings, and Medium is the best option at 64 FPS.
At 2560x1440, the system cannot run Archeage at a playable frame rate. The best preset, Low, averages only 48 FPS. Medium averages 43 FPS, High 29 FPS, and Ultra 20 FPS. The verdict data lists no playable settings for this resolution.
At 3840x2160, the situation is worse. Low averages 28 FPS, Medium 25 FPS, High 17 FPS, and Ultra 11 FPS. The verdict data lists no playable settings for this resolution either.
The practical implication is that this combo is a 1080p machine for Archeage, and only at medium quality or lower. Players who want higher visual fidelity or higher resolutions would need a more capable GPU. The CPU is not the limiting factor here; the recorded data shows that the GPU is the bottleneck at every resolution above 1080p.
FAQ
Q: Can the AMD Ryzen 5 7600X and Intel Arc B390 run Archeage at 1920x1080?
A: Yes, at Low and Medium settings. Low averages 71 FPS and Medium averages 64 FPS, both above the 60 FPS playable threshold. High and Ultra fall below at 43 FPS and 29 FPS.
Q: What is the best setting for 1920x1080 in Archeage?
A: Medium is the most demanding preset that stays at or above 60 FPS, with an average of 64 FPS. The verdict data confirms Medium as the best settings choice at this resolution.
Q: Is Archeage playable at 2560x1440 with this combo?
A: No. The best preset, Low, averages only 48 FPS, which is below the 60 FPS threshold. The verdict data lists no playable settings for this resolution.
Q: How does the Intel Arc B390 compare to its nearest GPU rivals?
A: The Arc B390 scores 1482 in the database, placing it in the 9th percentile. Its nearest rival, the NVIDIA GeForce GT 520MX, scores 1463, which is 1.3% lower. The NVIDIA GeForce 800M is 1.5% lower, the GT 625 OEM is 2.5% lower, and the GT 710 is 2.7% lower.
Q: How does the AMD Ryzen 5 7600X compare to its nearest CPU rivals?
A: The Ryzen 5 7600X scores 27636, placing it in the 79th percentile. The AMD Ryzen 7 5700X and Intel Core i5-12600K both score 27578, 0.2% lower. The AMD Ryzen 5 8500GE scores 27712, 0.3% higher, and the AMD Ryzen 7 5800 scores 27535, 0.4% lower.
Q: What is the frame rate range for Medium settings at 1920x1080?
A: Medium settings at 1920x1080 average 64 FPS, with a recorded minimum of 54 FPS and a maximum of 73 FPS. The average clears the 60 FPS threshold, but the minimum does not.
How This Combo Ranks
The database ranks this combination of AMD Ryzen 5 7600X and Intel Arc B390 at 3297 out of 3708 tested combos for Archeage. That places it in the bottom portion of the ranking, roughly in the 11th percentile of all tested combinations. This low rank is driven almost entirely by the GPU, which sits in the 9th percentile among all tested GPUs. The CPU, by contrast, sits in the 79th percentile, so the pairing is severely unbalanced.
A rank of 3297 out of 3708 means that the vast majority of tested hardware combinations deliver better performance in Archeage. The measured frame rates support this: the system only achieves playable performance at 1080p on Low or Medium settings, while many other combinations in the database would handle higher resolutions and presets. For players comparing this combo against other options, the data suggests that the GPU is the limiting factor and that any upgrade path should start there.
CPU and GPU Roles
The recorded data indicates that the Intel Arc B390 is the dominant constraint in this system for Archeage. The GPU sits in the 9th percentile among all tested GPUs, while the CPU sits in the 79th percentile. When a system has this kind of imbalance, the GPU typically becomes the bottleneck, and the frame rate data confirms this pattern.
Looking at the scaling between resolutions, the performance drops are consistent with a GPU-bound workload. At Low settings, the frame rate falls from 71 FPS at 1080p to 48 FPS at 1440p to 28 FPS at 2160p. At Medium settings, it falls from 64 FPS to 43 FPS to 25 FPS. These are large, consistent drops as pixel count increases, which is the signature of a GPU that is running out of rendering throughput. If the CPU were the bottleneck, the frame rate would stay relatively flat across resolutions because the CPU workload does not scale with resolution the way the GPU workload does.
The scaling between presets tells a similar story. At 1080p, the jump from Low to Medium costs only 7 FPS, but the jump from Medium to High costs 21 FPS. At 1440p, Low to Medium costs 5 FPS, while Medium to High costs 14 FPS. At 2160p, Low to Medium costs 3 FPS, while Medium to High costs 8 FPS. The pattern is consistent: the High preset introduces a disproportionately large performance hit, which suggests that it enables rendering features that are particularly expensive on this GPU architecture.
The CPU's role in this pairing is to stay out of the way. With a Cinebench R23 multicore score of 15236 and a single-core score of 1965, the Ryzen 5 7600X has enough headroom to feed the GPU in Archeage. The game is an MMORPG from 2014, and the database shows that the CPU is not the limiting factor at any resolution. Even at 1080p Low, where the frame rate reaches 71 FPS, the CPU is unlikely to be the constraint. The GPU is the component that determines whether this system can hit 60 FPS, and the data shows that it can only do so at 1080p on Low or Medium settings.