Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

30%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
71 FPS
Ultra 1080p Measured
29 FPS

1440p (2K / QHD)

Low 1440p Measured
48 FPS
Ultra 1440p Measured
20 FPS

4K (Ultra HD)

Low 4K Measured
28 FPS
Ultra 4K Measured
11 FPS
23.3ms Frame Time
35ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 20,468
Graphics Card
Required 28,463
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 11 17 25 28
1440p QHD 20 29 43 48
1080p Full HD 29 43 64 71

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 43
1920x1080 Low 71
1920x1080 Medium 64
1920x1080 Ultra 29
2560x1440 High 29
2560x1440 Low 48
2560x1440 Medium 43
2560x1440 Ultra 20
3840x2160 High 17
3840x2160 Low 28
3840x2160 Medium 25
3840x2160 Ultra 11

Performance Analysis: Archeage on Your System

Measured FPS Breakdown

The recorded data for Archeage with the AMD Ryzen 5 5600 and Intel Arc B390 covers four presets (Low, Medium, High, Ultra) across three resolutions. At 1920x1080, the average frame rates range from 29 FPS at Ultra to 71 FPS at Low. The Medium preset delivers 64 FPS average, with a minimum of 54 FPS and a maximum of 73 FPS. High settings produce 43 FPS average, while Ultra drops to 29 FPS. The gap between Low and Ultra is substantial, a 42 FPS difference, indicating that the graphics load scales heavily with preset on this hardware.

Moving to 2560x1440, the averages fall across the board. Low settings produce 48 FPS, Medium drops to 43 FPS (min 36, max 49), High settles at 29 FPS, and Ultra reaches only 20 FPS. The delta between Low and Ultra here is 28 FPS, a smaller absolute gap than at 1080p, but the relative performance loss is similar. Notably, the Medium preset at 1440p shows a tighter min/max range (36 to 49) compared to the 1080p Medium range (54 to 73), suggesting that the GPU is more consistently constrained at the higher resolution.

At 3840x2160, the numbers become marginal for playability. Low settings average 28 FPS, Medium averages 25 FPS (min 21, max 28), High averages 17 FPS, and Ultra averages 11 FPS. The spread from Low to Ultra is 17 FPS, and even the best case (Low) falls well below the 60 FPS threshold. The Medium preset at 4K shows a min of 21 FPS, which is only 2 FPS above the Ultra average, indicating severe performance degradation at this resolution regardless of settings.

For presets where min/max data is absent (Low, High, Ultra at all resolutions except Medium), the database records only averages. This is consistent with the measurement methodology, where only the Medium preset captured frame time variance. The absence of min/max for those settings does not imply stability; rather, it reflects incomplete frame capture for those configurations.

Best Settings per Resolution

The playable threshold for this analysis is 60 FPS average. At 1920x1080, the most demanding preset that clears this bar is Medium, with an average of 64 FPS. Low settings also exceed 60 FPS, averaging 71 FPS, but Medium is the highest preset that remains playable. High settings at 1080p average 43 FPS, which fails the threshold, and Ultra drops to 29 FPS.

At 2560x1440, no preset reaches 60 FPS. The closest is Low at 48 FPS, followed by Medium at 43 FPS, High at 29 FPS, and Ultra at 20 FPS. The database records no playable settings for this resolution, meaning even the lowest quality preset cannot maintain a 60 FPS average. Users targeting 1440p would need to accept frame rates in the 20 to 48 FPS range depending on preset choice.

At 3840x2160, the situation is worse. Low settings average 28 FPS, Medium 25 FPS, High 17 FPS, and Ultra 11 FPS. No preset comes close to the 60 FPS threshold, and the highest average is less than half of what is needed for smooth play. The verdict by resolution confirms this: 4K has no playable settings, and 1440p also has none.

For the best playable experience, the data points to 1080p Medium as the ceiling. The recorded average of 64 FPS provides a small margin above the threshold, but the minimum of 54 FPS suggests occasional dips below 60 FPS during heavy scenes. Low settings at 1080p offer a safer margin with a 71 FPS average, but no min/max data is available for that preset.

CPU and GPU Roles

The scaling between resolutions reveals which component dominates in Archeage. Comparing 1080p to 1440p at the same preset, the average FPS drops by roughly 23 to 33 percent depending on settings. For example, Medium goes from 64 FPS at 1080p to 43 FPS at 1440p, a 33 percent reduction. Low goes from 71 to 48 FPS, a 32 percent reduction. High goes from 43 to 29 FPS, a 33 percent reduction. This consistent proportional drop across presets indicates that the GPU is the primary bottleneck as resolution increases, since the CPU workload (draw calls, game logic) remains largely unchanged while pixel throughput scales with resolution.

The preset scaling at a fixed resolution further supports the GPU-bound interpretation. At 1080p, moving from Low to Ultra reduces the average from 71 to 29 FPS, a 59 percent drop. This large sensitivity to graphics settings is characteristic of a GPU-limited scenario, where shading, texture, and post-processing loads directly impact frame time. If the CPU were the limiting factor, the preset scaling would be flatter, as settings changes would not affect the CPU workload proportionally.

At 1440p and 4K, the GPU role becomes even more pronounced. The 4K Medium preset averages 25 FPS, which is 61 percent lower than the 1080p Medium average of 64 FPS. The 4K Low average of 28 FPS is 61 percent lower than the 1080p Low average of 71 FPS. These large resolution penalties confirm that the Intel Arc B390, with its modest specifications, is the limiting component at higher resolutions.

The CPU, a 6-core, 12-thread Zen 3 part with a boost clock of 4.40 GHz, has ample headroom for an MMORPG like Archeage. The game's CPU demands are unlikely to stress the Ryzen 5 5600, especially at 1080p where the GPU is clearly saturated. At 4K, the CPU role diminishes further, as the GPU takes on even more of the frame time burden. The data does not include CPU utilization metrics, but the consistent FPS scaling with resolution and preset strongly indicates that the GPU is the decisive factor across all tested configurations.

How This Combo Ranks

The AMD Ryzen 5 5600 and Intel Arc B390 combination ranks 3297 out of 3708 tested combos in Archeage. This places it in the bottom 11 percent of all configurations in the database. The rank reflects the GPU's low relative performance, as the Arc B390 sits in the 9th percentile among all GPUs, while the CPU ranks in the 74th percentile among all CPUs.

The combination is heavily imbalanced: the CPU is a mid-range part capable of handling modern titles, but the GPU is positioned near the bottom of the performance stack. This mismatch explains the low combo rank. In Archeage, where the GPU is the primary bottleneck as shown by the resolution and preset scaling, the weak GPU drags the entire system down despite the capable CPU.

The combo rank of 3297 out of 3708 means that roughly 89 percent of tested combinations deliver better performance in this game. This is not a competitive pairing for Archeage at higher resolutions or presets. The only scenario where this combo approaches playability is 1080p with Medium or Low settings, and even then, the margin above 60 FPS is thin.

Similar Performance Alternatives

Based on the nearest rivals in the database, the Intel Arc B390's closest GPU peers are all low-end NVIDIA parts. The NVIDIA GeForce GT 520MX scores 1463 in the Steel Nomad DX12 test, which is 1.3 percent below the Arc B390's 1482. The NVIDIA GeForce 800M scores 1460, a 1.5 percent deficit. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5 percent lower, and the NVIDIA GeForce GT 710 scores 1443, 2.7 percent lower. Any of these GPUs would deliver nearly identical frame rates in Archeage, meaning the same resolution and preset limitations would apply.

On the CPU side, the Ryzen 5 5600's nearest rivals are all within 0.5 percent of its average benchmark score of 20468. The Intel Core Ultra 7 258V scores 20454 (0.1 percent lower), the AMD Ryzen 5 8500G scores 20425 (0.2 percent lower), the AMD EPYC 9454P scores 20422 (0.2 percent lower), and the AMD EPYC 7713 scores 20363 (0.5 percent lower). Swapping the CPU for any of these parts would have a negligible impact on Archeage performance, since the GPU is the limiting factor. The CPU choice is effectively irrelevant for this game at the tested settings, as long as the part is in this performance class.

The Verdict

Can this PC run Archeage? The answer depends entirely on the target resolution and preset. At 1920x1080, yes, with limitations. The database records two playable presets at this resolution: Low at 71 FPS average and Medium at 64 FPS average. The best playable preset is Medium, which delivers a 64 FPS average with a minimum of 54 FPS. High settings at 1080p fall short at 43 FPS, and Ultra is not playable at 29 FPS.

At 2560x1440, the answer is no. No preset reaches the 60 FPS threshold. The best case is Low at 48 FPS, which is still 12 FPS below the playable threshold. Medium averages 43 FPS, High 29 FPS, and Ultra 20 FPS. Users must either drop to 1080p or accept sub-60 FPS performance at 1440p.

At 3840x2160, the answer is a definitive no. The highest average is 28 FPS at Low settings, which is less than half of the 60 FPS target. Medium averages 25 FPS, High 17 FPS, and Ultra 11 FPS. This resolution is not viable for this hardware combination in Archeage.

The verdict by resolution confirms these findings: 1080p has playable settings (Low and Medium), while 1440p and 4K have none. For a smooth experience, the user must run at 1080p with Medium settings, accepting the occasional dip to 54 FPS. Low settings provide a larger margin, but the visual quality trade-off is significant.

FAQ

Q: What is the best preset for this PC at 1080p?

A: Medium settings, which averages 64 FPS with a minimum of 54 FPS and a maximum of 73 FPS. Low settings average 71 FPS, but Medium is the highest preset that stays at or above the 60 FPS threshold.

Q: Can this system run Archeage at 1440p?

A: No. The highest average at 2560x1440 is 48 FPS on Low settings. Medium averages 43 FPS, High 29 FPS, and Ultra 20 FPS. No preset reaches the 60 FPS playable threshold.

Q: How does the Intel Arc B390 compare to its nearest GPU rivals?

A: The Arc B390 scores 1482 in the 3DMark Steel Nomad DX12 test. The NVIDIA GeForce GT 520MX scores 1463 (1.3 percent lower), the NVIDIA GeForce 800M scores 1460 (1.5 percent lower), the NVIDIA GeForce GT 625 OEM scores 1446 (2.5 percent lower), and the NVIDIA GeForce GT 710 scores 1443 (2.7 percent lower). All of these would perform nearly identically in Archeage.

Q: Is the CPU or GPU the limiting factor in Archeage?

A: The GPU is the limiting factor. The average FPS drops by roughly 30 percent when moving from 1080p to 1440p at the same preset, and by over 60 percent when moving from 1080p to 4K. The CPU, a Ryzen 5 5600 with 6 cores and 12 threads, is not the bottleneck at any tested resolution.

Q: What is the combo's rank among all tested systems for Archeage?

A: It ranks 3297 out of 3708 tested combos, placing it in the bottom 11 percent. This low rank is driven by the GPU's 9th percentile performance, while the CPU sits in the 74th percentile.

Q: Does the CPU choice matter for Archeage with this GPU?

A: Not significantly. The Ryzen 5 5600's nearest rivals, including the Intel Core Ultra 7 258V and AMD Ryzen 5 8500G, are within 0.5 percent of its average benchmark score. Since the GPU is the bottleneck, any of these CPUs would yield essentially the same frame rates.