Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

56%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
45 FPS

1440p (2K / QHD)

Low 1440p Measured
74 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
42 FPS
Ultra 4K Measured
17 FPS
15.2ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 17,507
Graphics Card
Required 28,463
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 17 26 38 42
1440p QHD 31 45 66 74
1080p Full HD 45 66 98 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 66
1920x1080 Low 110
1920x1080 Medium 98
1920x1080 Ultra 45
2560x1440 High 45
2560x1440 Low 74
2560x1440 Medium 66
2560x1440 Ultra 31
3840x2160 High 26
3840x2160 Low 42
3840x2160 Medium 38
3840x2160 Ultra 17

Performance Analysis: Archeage on Your System

Similar Performance Alternatives

The AMD Ryzen 5 4600G sits in a narrow performance band relative to its nearest CPU rivals. The database shows the processor's average benchmark score of 17507, placing it just 0.1% ahead of the AMD Ryzen 3 PRO 5355GE, which scores 17482. The Intel Core 7 150U trails by a similar margin at 17395, a 0.6% gap. On the other side, the AMD Ryzen 3 8300GE scores 17614, which is 0.6% higher, and the Intel Core i3-14100T reaches 17648, 0.8% above the 4600G. These four chips form a tight cluster, meaning any of them would produce nearly identical frame pacing in CPU-bound scenarios.

For the Intel Arc B570, the nearest rivals are equally close. The Arc B570's average benchmark score is 20556. The NVIDIA GeForce RTX 3070 Mobile scores 20534, a 0.1% delta, while the Intel Arc A750 scores 20582, also 0.1% away but in the opposite direction. The NVIDIA Quadro M4000M sits 0.4% lower at 20480, and the AMD Radeon R9 M390X is 0.5% higher at 20662. These deltas are so small that in real-world gaming, the differences would be within run-to-run variance. A system builder swapping the Arc B570 for an Arc A750 would expect nearly indistinguishable frame rates in Archeage.

The practical takeaway from the similarity data is that this combination of CPU and GPU has no weak-link outlier. Both components sit at comparable percentile positions, the CPU at the 71st percentile of all CPUs and the GPU at the 65th percentile of all GPUs. Neither part is dramatically faster or slower than its immediate alternatives, so the measured FPS figures below reflect what a user would get from any of these near-identical rivals.

Best Settings per Resolution

At 1920x1080, the most demanding preset that holds at or above 60 FPS is High. The recorded average is 66 FPS. Medium also clears the threshold at 98 FPS, and Low reaches 110 FPS, but High is the highest quality setting that remains playable. Ultra drops to 45 FPS, so it misses the 60 FPS bar.

At 2560x1440, the best playable setting is Medium with an average of 66 FPS. Low reaches 74 FPS, but Medium offers higher visual quality while still staying above the 60 FPS threshold. High falls to 45 FPS, and Ultra drops to 31 FPS, both below the playable line.

At 3840x2160, no preset reaches 60 FPS. The closest is Low at 42 FPS, followed by Medium at 38 FPS, High at 26 FPS, and Ultra at 17 FPS. The verdict data confirms that 4K has no playable settings for this combo.

The progression is consistent: each resolution step down allows one additional quality tier to become playable. At 1080p, High is the ceiling. At 1440p, Medium is the ceiling. At 4K, even Low is insufficient.

CPU and GPU Roles

The scaling pattern across resolutions reveals which component dominates at each setting. Moving from 1920x1080 to 2560x1440 at Medium settings, the average FPS drops from 98 to 66, a 32 FPS reduction. Moving from 2560x1440 to 3840x2160 at Medium, the average drops from 66 to 38, a 28 FPS reduction. The consistent decline indicates the GPU is becoming the limiting factor as pixel count rises.

At Low settings, the same pattern holds. The 1080p Low average is 110 FPS, 1440p Low is 74 FPS, and 4K Low is 42 FPS. The GPU load scales with resolution even at minimal quality settings. However, the CPU still matters at lower resolutions. The 1080p Low result of 110 FPS versus the 1080p Ultra result of 45 FPS shows a 65 FPS spread driven entirely by GPU workload, since the CPU is identical across all settings.

The Ultra preset tells a clear story about GPU headroom. At 1080p Ultra, the average is 45 FPS. At 1440p Ultra, it is 31 FPS. At 4K Ultra, it is 17 FPS. The nearly linear scaling from 1080p to 1440p to 4K suggests the GPU is saturated at Ultra across all resolutions. The CPU, a 6-core, 12-thread Zen 2 part with a boost clock of 4.20 GHz, has enough headroom to feed the GPU at 1080p High, evidenced by the 66 FPS result there.

The data indicates that for this game, the GPU is the primary constraint at every resolution above 1080p Low. The CPU can push 110 FPS at 1080p Low, but the GPU cannot maintain that rate at higher quality settings. At 4K, the GPU is so heavily loaded that even Low settings produce only 42 FPS.

FAQ

Q: Can this PC run Archeage at 1920x1080 with High settings?

A: Yes. The recorded average FPS at 1080p High is 66, which clears the 60 FPS playable threshold. High is the best playable setting at this resolution.

Q: What is the highest playable setting at 2560x1440?

A: Medium is the most demanding preset that stays at or above 60 FPS at 1440p, with an average of 66 FPS. Low also works at 74 FPS, but High falls to 45 FPS.

Q: Is 4K playable with this hardware?

A: No. The verdict data lists no playable settings at 3840x2160. The best result is Low at 42 FPS, which is below the 60 FPS threshold.

Q: How much faster is the Arc B570 than the Arc A750?

A: The Arc B570 has an average benchmark score of 20556, while the Arc A750 scores 20582. The Arc B570 is 0.1% slower, a difference small enough to be negligible in practice.

Q: What is the FPS range at 1080p Medium?

A: The measured range is 83 to 112 FPS, with an average of 98 FPS. This is the only 1080p setting with recorded minimum and maximum values in the database.

Q: How does the Ryzen 5 4600G compare to the Core i3-14100T?

A: The Ryzen 5 4600G has an average benchmark score of 17507, while the Core i3-14100T scores 17648. The 4600G is 0.8% slower, placing it within a very tight performance band.

Measured FPS Breakdown

At 1920x1080, the database records the following averages: Low at 110 FPS, Medium at 98 FPS with a minimum of 83 and a maximum of 112, High at 66 FPS, and Ultra at 45 FPS. The Medium setting is the only one at this resolution with complete min/max data.

At 2560x1440, Low averages 74 FPS. Medium averages 66 FPS with a range of 56 to 76. High averages 45 FPS. Ultra averages 31 FPS. Only Medium has recorded min and max values.

At 3840x2160, Low averages 42 FPS. Medium averages 38 FPS with a range of 32 to 43. High averages 26 FPS. Ultra averages 17 FPS. Again, only Medium includes min and max measurements.

The overall pattern shows a consistent step-down as resolution increases. The 1080p to 1440p transition at Medium costs 32 FPS on average. The 1440p to 4K transition at Medium costs 28 FPS. The Ultra preset shows the steepest absolute decline: from 45 FPS at 1080p to 17 FPS at 4K, a 28 FPS total drop across two resolution steps.

The min and max data at Medium settings provides a sense of frame consistency. At 1080p Medium, the spread is 29 FPS (83 to 112). At 1440p Medium, the spread is 20 FPS (56 to 76). At 4K Medium, the spread is 11 FPS (32 to 43). The narrowing range at higher resolutions suggests the GPU is becoming more consistently saturated, leaving less variance in frame delivery.

How This Combo Ranks

The combination of the AMD Ryzen 5 4600G and Intel Arc B570 ranks 2983 out of 3708 tested combos in Archeage. This places the combo in the lower half of the database, specifically at approximately the 80th percentile from the bottom. The rank reflects the game's demanding nature at higher resolutions and presets.

Given that the GPU sits at the 65th percentile of all GPUs and the CPU at the 71st percentile of all CPUs, the combo rank of 2983 suggests Archeage is particularly sensitive to the GPU's mid-range position. A higher-ranked GPU would likely improve the 4K results substantially, while a higher-ranked CPU would have less impact given the GPU-bound behavior observed across most settings.

The rank also contextualizes the playable settings. A combo ranked 2983 out of 3708 is expected to handle 1080p well, which the data confirms with playable High settings. The inability to reach 60 FPS at 4K is consistent with a mid-pack GPU struggling with a 2014 MMORPG's rendering load at extreme resolutions.

The Verdict

This PC can run Archeage at 1920x1080 and 2560x1440, but not at 3840x2160. At 1080p, the playable settings are High, Low, and Medium, with High being the best at 66 FPS. At 1440p, the playable settings are Low and Medium, with Medium being the best at 66 FPS. At 4K, no settings are playable, as the highest average is 42 FPS on Low.

The 60 FPS threshold is met at both 1080p and 1440p, provided the user selects the appropriate quality tier. For 1080p, High delivers the best balance of visual quality and performance. For 1440p, Medium is the recommended ceiling. Ultra is not playable at any resolution, and 4K should be avoided entirely.

The data shows a system that is well suited to 1080p gaming with headroom for quality settings, capable of 1440p with moderate settings, and unsuitable for 4K. Users targeting 60 FPS should stay at or below 1440p Medium.