Archeage

The AMD Ryzen 5 3600 paired with the Intel Arc B570 delivers a highly resolution-dependent experience in Archeage. The data shows this combo can handle the game smoothly at mainstream resolutions, but it struggles to maintain playable frame rates at 4K, especially under heavier graphical loads. The following analysis breaks down the recorded measurements, how this configuration ranks among all tested combinations, and what the numbers imply for gameplay.

Measured FPS Breakdown

At 3840x2160 (4K), the results are consistently below the 60 FPS playable threshold. The Ultra preset averages just 17 FPS, which is a severe limitation for any competitive or visually immersive play. High settings fare better but still average only 26 FPS. Medium settings improve to an average of 38 FPS, with a minimum of 32 FPS and a maximum of 43 FPS, indicating that even the mid-range preset is not viable for smooth gameplay. The Low preset averages 42 FPS, which is the best result at this resolution, but it remains firmly in unplayable territory. The data suggests the GPU is heavily taxed at 4K, as even the lowest settings cannot push the frame rate close to 60.

At 2560x1440 (1440p), the situation improves significantly. The Low preset averages 74 FPS, comfortably clearing the 60 FPS threshold. Medium settings average 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS, which means the average is playable but there are occasional dips below the target. High settings average 45 FPS, which is not playable, and Ultra averages 31 FPS. The jump from Low to Medium is relatively small in terms of average FPS, but the minimum FPS at Medium (56) is close to the threshold, suggesting that demanding scenes could cause slight stutter. For players who prefer stability, Low is the safer option at 1440p, while Medium offers better visuals with a mostly acceptable frame rate.

At 1920x1080 (1080p), the combo shines. The Low preset averages 110 FPS, which is very fluid. Medium settings average 98 FPS, with a minimum of 83 FPS and a maximum of 112 FPS, indicating a strong and consistent experience. High settings average 66 FPS, which is above the 60 FPS threshold, making it the most visually demanding playable preset at this resolution. Ultra averages 45 FPS, which is not playable, suggesting that the Ultra preset introduces too much overhead for this hardware. The scaling from Low to High shows a gradual decline, but the step from High to Ultra is a large drop of 21 FPS, indicating that Ultra settings likely enable effects that disproportionately impact the GPU.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 3600 and Intel Arc B570 ranks 2983rd out of 3708 tested combos for Archeage. This places the configuration in the lower half of all tested systems, which is a notable finding given that the individual components are not entry-level parts. The rank suggests that Archeage is a demanding title that does not favor this pairing, likely due to its MMO nature where many on-screen characters and effects can stress both the CPU and GPU.

The percentile data for the CPU and GPU individually provides context. The Ryzen 5 3600 has a percentile rank of 71 against all CPUs, meaning it outperforms the majority of processors in general benchmarks. The Intel Arc B570 has a percentile rank of 65 against all GPUs. Despite these solid individual standings, the combined rank in Archeage is poor, indicating that the game may have specific bottlenecks or that the hardware requires more headroom than this pairing offers. The gap between the component-level performance and the game-specific rank highlights how important optimization is for MMOs, where consistent frame delivery matters more than raw peak scores.

CPU and GPU Roles

The measured FPS data across resolutions reveals a clear pattern: the GPU becomes the dominant bottleneck as resolution increases, while the CPU likely plays a larger role at lower resolutions. At 1080p, the average FPS at Low (110) is much higher than at 4K Low (42), which is a 2.6x difference. This scaling is typical of a GPU-limited scenario, as the lower resolution reduces the pixel rendering workload, allowing the CPU to feed frames more easily.

Comparing the preset scaling at each resolution sheds light on the balance. At 1080p, the difference between Low and Ultra is 65 FPS (110 down to 45). At 1440p, the difference is 43 FPS (74 down to 31). At 4K, the difference is 25 FPS (42 down to 17). The shrinking gap between Low and Ultra as resolution increases suggests that the GPU is being saturated at higher resolutions, making the CPU less relevant. Conversely, at 1080p, the CPU has more influence, as the GPU can render frames quickly, and the game’s logic and draw calls become more significant.

The Ryzen 5 3600 has 6 cores and 12 threads, which is adequate for modern games, but Archeage is an older MMO that may not fully utilize many threads. The data implies that at 1080p, the CPU is likely sufficient to keep the GPU fed, as evidenced by the high FPS on Low settings. At 1440p and beyond, the GPU’s limited bandwidth and shading power become the limiting factor, as the FPS drops are more pronounced with each preset increase. For players who want to maximize performance, lowering resolution is the most effective lever, rather than adjusting CPU-related settings.

FAQ

Q: What is the highest playable preset at 1080p for this hardware?

A: The High preset is the most demanding setting that stays at or above 60 FPS, with an average of 66 FPS at 1920x1080.

Q: Can this system run Archeage at 1440p with Medium settings?

A: Yes, the Medium preset at 2560x1440 averages 66 FPS, but it has a minimum of 56 FPS, which occasionally dips below the 60 FPS threshold.

Q: Is 4K gaming viable with this combo?

A: No, the best result at 3840x2160 is 42 FPS on Low settings, which is below the playable threshold of 60 FPS. The Ultra preset averages only 17 FPS.

Q: How does the Ultra preset perform across all resolutions?

A: The Ultra preset is not playable at any resolution. It averages 17 FPS at 4K, 31 FPS at 1440p, and 45 FPS at 1080p, all below the 60 FPS target.

Q: Which component is more critical for improving frame rates in Archeage?

A: The data indicates that resolution scaling has a major impact on FPS, and the GPU is the primary bottleneck at higher resolutions. Lowering resolution from 4K to 1080p yields a significant FPS increase, suggesting the GPU is the limiting factor.

Q: Does the combo rank in the database reflect good performance for this game?

A: No, the combo ranks 2983rd out of 3708 tested systems, placing it in the lower 20% of combinations, which is worse than its individual component percentiles would suggest.

Similar Performance Alternatives

For the CPU, the nearest rivals to the AMD Ryzen 5 3600 are a mix of mobile and server processors. The Intel Core i7-1260P has an average benchmark score that is 0.2% higher, meaning it would behave nearly identically in CPU-bound scenarios. The Intel Core i5-11400 is also 0.2% lower in score, so it would offer a very similar experience. Two AMD EPYC server chips, the 7573X and 7742, are also within 0.2% of the Ryzen 5 3600, but their performance in a gaming context would be similar for threaded workloads, though they are not typical desktop parts. Any of these CPUs would likely produce the same FPS results in Archeage when paired with the same GPU.

For the GPU, the Intel Arc B570’s nearest rivals are led by the NVIDIA GeForce RTX 3070 Mobile, which has a 0.1% higher average score. This suggests that a laptop GPU with similar performance would produce nearly identical frame rates. The Intel Arc A750 is 0.1% lower, indicating a close match. The NVIDIA Quadro M4000M and AMD Radeon R9 M390X are further afield, with 0.4% and 0.5% differences respectively, but they are older or workstation-oriented parts. In practice, swapping the Arc B570 for an Arc A750 would maintain the same playability profile, while the RTX 3070 Mobile might offer slightly better frame pacing in certain scenes, though the data does not show any measurable difference in averages.

Best Settings per Resolution

At 3840x2160, there is no playable preset. The database records no settings that achieve an average of 60 FPS or higher, so the best option is the Low preset at 42 FPS, but it does not meet the playable threshold.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 66 FPS. This is the recommended setting for players who want a balance of visual quality and performance, though the minimum FPS of 56 indicates occasional dips.

At 1920x1080, the most demanding playable preset is High, which averages 66 FPS. This provides a solid visual experience while maintaining an acceptable frame rate. The Low and Medium presets also exceed 60 FPS, with averages of 110 and 98 FPS respectively, but High offers the best quality without sacrificing playability.

The Verdict

This PC can run Archeage, but only under specific conditions. At 1920x1080, the system is fully capable, with three presets (Low, Medium, High) clearing the 60 FPS threshold. The High preset at 66 FPS is the best visual option for smooth gameplay. At 2560x1440, the system is partially playable, as both the Low and Medium presets exceed 60 FPS on average, but the Medium preset’s minimum FPS of 56 means it is not consistently smooth. For a stable experience at 1440p, the Low preset at 74 FPS is the safer choice. At 3840x2160, the system cannot achieve 60 FPS at any setting, so 4K is not a viable option for this game. The data shows that players should target 1080p for the best experience, with 1440p as a secondary option if they are willing to accept occasional frame drops on Medium settings.