Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
124 FPS
Ultra 1080p Measured
51 FPS

1440p (2K / QHD)

Low 1440p Measured
84 FPS
Ultra 1440p Measured
35 FPS

4K (Ultra HD)

Low 4K Measured
48 FPS
Ultra 4K Measured
20 FPS
13.3ms Frame Time
20ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 21,484
Graphics Card
Required 28,463
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 29 43 48
1440p QHD 35 51 75 84
1080p Full HD 51 75 111 124

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 75
1920x1080 Low 124
1920x1080 Medium 111
1920x1080 Ultra 51
2560x1440 High 51
2560x1440 Low 84
2560x1440 Medium 75
2560x1440 Ultra 35
3840x2160 High 29
3840x2160 Low 48
3840x2160 Medium 43
3840x2160 Ultra 20

Performance Analysis: Archeage on Your System

Curiosity is warranted when a 2014 MMORPG meets a Ryzen 5 2600 and an Intel Arc B580, because Archeage should, on paper, be trivial hardware work for modern components. The recorded data tells a more interesting story: frame rates that scale hard with resolution, a combo that clears 60 FPS comfortably at 1080p and 1440p, and a 4K wall that no preset in the database manages to climb over. The pairing sits at rank 2797 of 3708 tested combinations in this title, which raises the question of whether the game itself, rather than the hardware, is the limiter.

Measured FPS Breakdown

At 1920x1080, the data shows a wide spread across presets. Low delivers an average of 124 FPS, Medium reaches 111 FPS with a recorded minimum of 94 and a maximum of 127, High holds 75 FPS, and Ultra drops to 51 FPS. The Medium numbers are the only configuration with minimum and maximum data captured, and they are instructive: even the worst recorded frame in that run stays above the 60 FPS playable threshold, and the ceiling of 127 nearly matches the Low preset average. That 94 FPS floor at Medium suggests frame pacing is stable enough for an MMORPG where consistent delivery matters more than peak figures.

At 2560x1440, the same ladder shifts downward. Low averages 84 FPS, Medium averages 75 FPS with a minimum of 63 and a maximum of 86, High falls to 51 FPS, and Ultra lands at 35 FPS. The Medium run is again the only one with min/max data, and its floor of 63 sits just above the threshold. That is a pass, but a narrow one: the gap between the average and the minimum is 12 frames, so busy scenes likely dip close to the playable line.

At 3840x2160, nothing clears the bar. Low averages 48 FPS, Medium averages 43 FPS with a minimum of 36 and a maximum of 49, High manages 29 FPS, and Ultra stumbles at 20 FPS. The Medium spread at 4K is tight, only 13 frames between floor and ceiling, which points to a hard throughput limit rather than scene-driven stutter. The question the data poses is why a game released in 2014 costs this much at 4K, and the most plausible reading is that the Arc B580 is being fed far more pixels than its 456 GB/s of memory bandwidth and 2560 shading units can comfortably rasterize in this engine.

FAQ

Q: Can the Ryzen 5 2600 and Arc B580 run Archeage at 1080p above 60 FPS?

A: Yes. Low (124 FPS), Medium (111 FPS), and High (75 FPS) all clear the 60 FPS threshold at 1920x1080. Only Ultra, at 51 FPS, falls short.

Q: What is the best preset for 60 FPS at 1440p?

A: Medium, averaging 75 FPS with a minimum of 63. Low also qualifies at 84 FPS, but Medium is the most demanding preset that stays at or above 60 FPS.

Q: Is 4K playable on this combo?

A: No. The best result at 3840x2160 is 48 FPS on Low, and every preset from Low through Ultra sits below the 60 FPS threshold.

Q: How close does Ultra get at 1080p?

A: Ultra averages 51 FPS at 1920x1080, nine frames short of the threshold. Dropping one step to High restores a 75 FPS average, a gain of 24 frames for a single preset change.

Q: Does the frame rate ever dip below 60 in the recorded Medium runs?

A: At 1080p the Medium minimum is 94 FPS and at 1440p it is 63 FPS, so both stay above the line. At 4K the Medium minimum drops to 36 FPS.

Q: How does this hardware pairing rank among tested combos for this game?

A: It ranks 2797 out of 3708 recorded combinations in Archeage, placing it in the lower portion of the database despite the permissive nature of the title's requirements at lower resolutions.

How This Combo Ranks

The rank of 2797 out of 3708 is the most puzzling datum in the pack. A six-core, twelve-thread Zen+ processor sitting at the 75th percentile of all CPUs, paired with a Battlemage GPU at the 68th percentile of all GPUs, would be expected to sit higher in a 2014 MMORPG. The database suggests otherwise. One interpretation is that Archeage's leaderboard is dominated by combinations leveraging stronger single-thread performance, since the Ryzen 5 2600's Passmark single-thread score of 2239 and Geekbench single-core score of 1154 are modest next to its multi-thread results, and MMORPGs are historically sensitive to per-core throughput when many players and entities populate a scene.

Another reading is that the game's engine simply rewards a different balance than this combo provides. The Arc B580 contributes strong raw compute, with a Passmark G3D score of 15748 and a Geekbench Vulkan score of 109672, yet the game's frame rates scale steeply with resolution, indicating the GPU is the binding constraint at higher pixel counts. Either way, the rank reflects aggregate performance across the full test matrix, not just the comfortable 1080p results, and the weak 4K showing drags the combination down the table.

Similar Performance Alternatives

For the CPU, the database places the Ryzen 5 2600 in a cluster of parts with nearly identical aggregate scores. The Intel Core Ultra 5 228V sits within 0.2 percent, the Intel Core i9-11900H within 0.5 percent, the Intel Xeon D-1746TER within 0.7 percent in the other direction, and the AMD EPYC 9454 within 1.2 percent. Any of these would deliver broadly similar overall throughput, though Archeage's apparent single-thread sensitivity means per-core behavior deserves scrutiny before assuming identical in-game results.

For the GPU, the neighbors are equally tight. The AMD Radeon RX 580 2048SP scores 0.2 percent higher, the NVIDIA GeForce RTX 2080 lands 0.6 percent below, the RTX 3080 is 0.7 percent above, and the NVIDIA P106-100 is 1 percent above. A system built around the RTX 2080 or RX 580 2048SP would, on aggregate database scores, behave much like this Arc B580 configuration in Archeage. The spread across all eight rival parts listed is barely more than a percent in any direction, which means players shopping near this tier can treat these as interchangeable for this title and let other games decide the purchase.

CPU and GPU Roles

The scaling data points firmly at the GPU as the dominant factor. From 1080p Medium to 1440p Medium, the average falls from 111 to 75 FPS, and at 4K Medium it drops further to 43 FPS. That is a 36-frame loss moving up one resolution step and another 32 moving to the next, while the CPU load is essentially unchanged by resolution. When frame rate collapses as pixels multiply with the processor held constant, the graphics side is the bottleneck.

The preset ladder confirms the same conclusion within a fixed resolution. At 1080p, going from Low (124 FPS) to Ultra (51 FPS) costs 73 frames, a huge swing driven entirely by visual load. The CPU's influence shows up elsewhere: the fact that even Low at 1080p tops out at 124 FPS, rather than climbing into the hundreds, hints that the Ryzen 5 2600's single-thread throughput sets a ceiling the GPU cannot lift. Its Cinebench R15 single-core score of 157.3 against a multi-core score of 1248 illustrates the asymmetry. In practice, the GPU governs which preset and resolution are playable, while the CPU quietly caps the frame rate at the low-settings end where the GPU has headroom to spare.

The Verdict

Yes, this PC can run Archeage, with clear conditions. At 1920x1080, Low, Medium, and High all exceed 60 FPS, with High being the best qualifying preset at 75 FPS. At 2560x1440, Low (84 FPS) and Medium (75 FPS) clear the bar, and Medium is the recommended ceiling. At 3840x2160, the verdict flips: no preset reaches 60 FPS, with the best attempt being 48 FPS on Low. Ultra is off the menu at every resolution, peaking at 51 FPS even at 1080p. For a genre where smooth frame delivery during crowded encounters matters, the 1440p Medium result, averaging 75 with a 63 FPS floor, is the sweet spot this data supports.

Best Settings per Resolution

At 1920x1080, High is the most demanding preset that stays at or above 60 FPS, averaging 75 FPS. At 2560x1440, Medium is the ceiling, averaging 75 FPS with a recorded minimum of 63. At 3840x2160, no preset qualifies, as even Low averages only 48 FPS. The pattern is consistent: each resolution step forces one preset lower to hold the threshold, and 4K asks for more than this combination can give in Archeage.